pfSense

#

# $FreeBSD: src/etc/etc.i386/ttys,v 1.10 2003/10/24 15:44:08 simokawa Exp $

#       @(#)ttys        5.1 (Berkeley) 4/17/89

#

# This file specifies various information about terminals on the system.

# It is used by several different programs.  Common entries for the

# various columns include:

#

# name  The name of the terminal device.

#

# getty The program to start running on the terminal.  Typically a

#       getty program, as the name implies.  Other common entries

#       include none, when no getty is needed, and xdm, to start the

#       X Window System.

#

# type The initial terminal type for this port.  For hardwired

#      terminal lines, this will contain the type of terminal used.

#      For virtual consoles, the correct type is typically cons25, but

#      vt220 will work better if you need interoperability with other

#      systems like Solaris or GNU/Linux.

#      Other common values include network for network connections on

#      pseudo-terminals, dialup for incoming modem ports, and unknown

#      when the terminal type cannot be predetermined.

#

# status Must be on or off.  If on, init will run the getty program on

#        the specified port.  If the word "secure" appears, this tty

#        allows root login.

#

# name  getty                           type    status          comments

#

# If console is marked "insecure", then init will ask for the root password

# when going to single-user mode.