pfSense

#!/bin/sh

#

# pfSense-rc

#

# part of pfSense (https://www.pfsense.org)

# Copyright (c) 2004-2018 Rubicon Communications, LLC (Netgate)

# All rights reserved.

#

# originally based on m0n0wall (http://neon1.net/m0n0wall)

# Copyright (c) 2003-2004 Manuel Kasper <mk@neon1.net>.

# All rights reserved.

#

# Licensed under the Apache License, Version 2.0 (the "License");

# you may not use this file except in compliance with the License.

# You may obtain a copy of the License at

#

# http://www.apache.org/licenses/LICENSE-2.0

#

# Unless required by applicable law or agreed to in writing, software

# distributed under the License is distributed on an "AS IS" BASIS,

# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

# See the License for the specific language governing permissions and

# limitations under the License.

#/bin/stty status '^T'

#/bin/stty susp '^-' intr '^-' quit '^-'

#trap : 2

#trap : 3

HOME=/

PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin

export HOME PATH

get_version ()

{

	# Set our current version

	version=`/bin/cat /etc/version`

	# Version patch

	version_patch="0"

	if [ -f /etc/version.patch ]; then

		version_patch=`/bin/cat /etc/version.patch`

	fi

	if [ "${version_patch}" = "0" ]; then

		version_patch=""

	else

		version_patch=" (Patch ${version_patch})"

	fi

}

get_version

# Setup dumpdev/ddb/savecore"

echo "Configuring crash dumps..."

/etc/rc.dumpon

if [ -e /root/force_growfs ]; then

	/etc/rc.d/growfs onestart

fi

#

# The file system needs to be unmounted to guarantee a clean operation of fsck.

# Pending changes can keep the file system dirty until all the cached data is

# flushed to the disk.

#

/sbin/mount -ur /

fsck_forced_iterations=`/bin/kenv -q pfsense.fsck.force`

if [ ! -z "${fsck_forced_iterations}" ]; then

	echo "Forcing filesystem check (${fsck_forced_iterations} times)..."

	while [ ${fsck_forced_iterations} -gt 0 ]; do

		/sbin/fsck -y -t ufs

		fsck_forced_iterations=$((fsck_forced_iterations - 1))

	done

fi

FSCK_ACTION_NEEDED=0

/sbin/fsck -p

case $? in

0)

	echo "Filesystems are clean, continuing..."

	echo "Mounting filesystems..."

	;;

8|16)

	echo "Preen mode recommended running a check that will be performed now."

	FSCK_ACTION_NEEDED=1

	;;

*)

	echo "Stopping boot is recommended because filesystem manual action is needed, nevertheless automated repair of the filesystem will be attempted."

	FSCK_ACTION_NEEDED=1

	;;

esac

if [ ${FSCK_ACTION_NEEDED} = 1 ]; then

	echo "WARNING: Trying to recover filesystem from inconsistency..."

	/sbin/fsck -y -t ufs

fi

/sbin/mount -a 2>/dev/null

mount_rc=$?

attempts=0

while [ ${mount_rc} -ne 0 -a ${attempts} -lt 10 ]; do

	/sbin/fsck -y -t ufs

	/sbin/mount -a 2>/dev/null

	mount_rc=$?

	attempts=$((attempts+1))

done

if [ ${mount_rc} -ne 0 ]; then

	echo "ERROR: Impossible to mount filesystem, use interactive shell to attempt to recover it"

	/bin/sh

	/sbin/reboot

fi

# Handle ZFS read-only case

unset USE_ZFS

if /sbin/kldstat -qm zfs; then

	ZFSFSAVAILABLE=$(/sbin/zfs mount 2>/dev/null | wc -l)

	if [ $ZFSFSAVAILABLE -eq 0 ]; then

		/sbin/kldunload zfs

	else

		USE_ZFS=1

		ZFSROOT=$(/sbin/zfs mount | /usr/bin/awk '$2 == "/" {print $1}')

		if [ -n "$ZFSROOT" ]; then

			/sbin/zfs set readonly=off $ZFSROOT

		fi

		/sbin/zfs mount -a

		# If /bootpool is present, then there is an additional zfs pool to import

		# See https://redmine.pfsense.org/issues/8063

		if [ -d /bootpool ]; then

			/sbin/zpool import -f bootpool

		fi

	fi

fi

# If /conf is a directory, convert it to a symlink to /cf/conf

if [ -d "/conf" ]; then

	# If item is not a symlink then rm and recreate

	CONFPOINTSTO=`readlink /conf`

	if ! test "x$CONFPOINTSTO" = "x/cf/conf"; then

		/bin/rm -rf /conf

		/bin/ln -s /cf/conf /conf

	fi

fi

USE_MFS_TMPVAR=$(/usr/local/sbin/read_xml_tag.sh boolean system/use_mfs_tmpvar)

unset MOVE_PKG_DATA

# If use MFS var is disabled, move files back to place

if [ "${USE_MFS_TMPVAR}" != "true" -a -f /root/var/db/pkg/local.sqlite ]; then

	MOVE_PKG_DATA=1

	rm -rf /var/db/pkg 2>/dev/null

	rm -rf /var/cache/pkg 2>/dev/null

	mv -f /root/var/db/pkg /var/db

	mv -f /root/var/cache/pkg /var/cache

# If use MFS var is enabled, move files to a safe place

elif [ "${USE_MFS_TMPVAR}" = "true" -a -f /var/db/pkg/local.sqlite ]; then

	MOVE_PKG_DATA=1

	rm -rf /root/var/db/pkg 2>/dev/null

	rm -rf /root/var/cache/pkg 2>/dev/null

	/bin/mkdir -p /root/var/db /root/var/cache

	mv -f /var/db/pkg /root/var/db

	mv -f /var/cache/pkg /root/var/cache

fi

# Mount /var and /tmp on ZFS filesystems when it's necessary

if [ -n "${USE_ZFS}" -a "${USE_MFS_TMPVAR}" = "true" ]; then

	zfs list -H -o name,mountpoint |

	    while read volume mountpoint; do

		[ "${mountpoint}" != "/var" -a "${mountpoint}" != "/tmp" ] \

			&& continue

		/sbin/zfs umount ${volume}

	done

fi

if [ "${USE_MFS_TMPVAR}" = "true" ]; then

	/etc/rc.embedded

fi

if [ -n "${MOVE_PKG_DATA}" -o "${USE_MFS_TMPVAR}" = "true" ]; then

	/bin/mkdir -p /var/db /var/cache

	ln -sf ../../root/var/db/pkg /var/db/pkg

	ln -sf ../../root/var/cache/pkg /var/cache/pkg

fi

# Read product_name from $g, defaults to pfSense

# Use php -n here because we are not ready to load extensions yet

product=$(/usr/local/bin/php -n /usr/local/sbin/read_global_var product_name pfSense)

# Setup ddb on all platforms.

if [ ! -z "`sysctl -Nq debug.ddb.scripting.scripts`" ]; then

	/sbin/ddb /etc/${product}-ddb.conf

fi

# Restore contents of the RAM disk store

/etc/rc.restore_ramdisk_store

# Make sure /home exists

[ -d /home ] \

	|| mkdir /home

/bin/rm -f /root/force_fsck

/bin/rm -f /root/force_growfs

/bin/rm -f /root/TRIM_set

/bin/rm -f /root/TRIM_unset

# Disable APM on ATA drives. Leaving this on will kill drives long-term, especially laptop drives, by generating excessive Load Cycles.

if [ -f /etc/rc.disable_hdd_apm ]; then

	/etc/rc.disable_hdd_apm

fi

# Eject CD devices on 3G modems

MANUFACTURER="huawei|zte"

CDDEVICE=`dmesg |egrep -ie "($MANUFACTURER)" | awk -F: '/cd/ {print $1}'`

if [ "$CDDEVICE" != "" ]; then

	cdcontrol -f /dev/"$CDDEVICE" eject

fi

# Use php -n here because we are not ready to load extensions yet

varrunpath=$(/usr/local/bin/php -n /usr/local/sbin/read_global_var varrun_path "/var/run")

if [ "${USE_MFS_TMPVAR}" != "true" ]; then

	/sbin/mdmfs -S -M -s 4m md $varrunpath

fi

echo

cat /usr/local/share/pfSense/ascii-art/pfsense-logo-small.txt

echo

echo

echo "Welcome to ${product} ${version}${version_patch}..."

echo

/sbin/conscontrol mute off >/dev/null

SWAPDEVICE=`/bin/cat /etc/fstab | /usr/bin/grep swap | /usr/bin/cut -f1`

if [ -n "${SWAPDEVICE}" ]; then

	/sbin/swapon -a 2>/dev/null >/dev/null

	/etc/rc.savecore

fi

# make some directories in /var

/bin/mkdir -p $varrunpath /var/log /var/etc /var/db/entropy /var/db/rrd /var/at/jobs/ /var/empty /var/log/nginx 2>/dev/null

# turn off the immutable flag, set /var/empty to read-only, make it immutable again

chflags noschg /var/empty

chmod 0555 /var/empty

chflags schg /var/empty

/bin/rm -rf $varrunpath/*

# Cleanup configuration files from previous instance

/bin/rm -rf /var/etc/*

# Workaround for ipsec symlinks, otherwise it's going to break

# strongswan pkg upgrade

if [ -L /usr/local/etc/ipsec.d ]; then

	rm -f /usr/local/etc/ipsec.d

fi

if [ -L /usr/local/etc/ipsec.conf ]; then

	rm -f /usr/local/etc/ipsec.conf

fi

if [ -L /usr/local/etc/strongswan.d ]; then

	rm -f /usr/local/etc/strongswan.d

fi

if [ -L /usr/local/etc/strongswan.conf ]; then

	rm -f /usr/local/etc/strongswan.conf

fi

# Remove deprecated symlinks - #5538

for f in /etc/hosts \

    /etc/resolv.conf \

    /etc/resolvconf.conf \

    /etc/syslog.conf; do

	if [ -L "${f}" ]; then

		rm -f ${f}

	fi

done

# Make sure our /tmp is 777 + Sticky

/bin/chmod 1777 /tmp

if [ ! -L /etc/dhclient.conf ]; then

	/bin/rm -rf /etc/dhclient.conf

fi

if [ ! -d /var/tmp ]; then

	/bin/mkdir -p /var/tmp

fi

# Make sure our /var/tmp is 777 + Sticky

/bin/chmod 1777 /var/tmp

set -T

trap "echo 'Reboot interrupted'; exit 1" 3

echo -n "."

DISABLESYSLOGCLOG=$(/usr/local/sbin/read_xml_tag.sh boolean system/disablesyslogclog)

LOG_FILES="system filter dhcpd vpn poes l2tps openvpn portalauth ipsec ppp relayd wireless nginx ntpd gateways resolver routing"

DEFAULT_LOG_FILE_SIZE=$(/usr/local/sbin/read_xml_tag.sh string syslog/logfilesize)

DEFAULT_LOG_FILE_SIZE=${DEFAULT_LOG_FILE_SIZE:-"511488"}

for logfile in $LOG_FILES; do

	if [ "$DISABLESYSLOGCLOG" = "true" ]; then

		/usr/bin/touch /var/log/$logfile.log

	else

		if [ ! -f /var/log/$logfile.log ]; then

			/usr/local/sbin/clog -i -s ${DEFAULT_LOG_FILE_SIZE} /var/log/$logfile.log

		fi

	fi

done

# change permissions on newly created log files.

/bin/chmod 0600 /var/log/*.log

echo -n "."

DEVFS=`/sbin/mount | /usr/bin/grep devfs | /usr/bin/wc -l | /usr/bin/cut -d" " -f8`

if [ "$DEVFS" = "0" ]; then

	mount_devfs devfs /dev

fi

# Create an initial utmp file

cd $varrunpath && /bin/cp /dev/null utmp && /bin/chmod 644 utmp

echo -n "."

/sbin/ldconfig -elf /usr/lib /usr/local/lib /lib

/etc/rc.d/ldconfig start 2>/dev/null

# Launching kbdmux(4)

if [ -f "/dev/kbdmux0" ]; then

	echo -n "."

	/usr/sbin/kbdcontrol -k /dev/kbdmux0 < /dev/console

	[ -c "/dev/atkbd0" ] && kbdcontrol -a atkbd0 < /dev/console

	[ -c "/dev/ukbd0" ] && kbdcontrol -a ukbd0 < /dev/console

fi

# Fire up unionfs if mount points exist.

if [ -f /dist/uniondirs ]; then

	echo -n "."

	/etc/rc.d/unionfs start

fi

echo "done."

# Recreate capabilities DB

/usr/bin/cap_mkdb /etc/login.conf

if [ -f /cf/conf/needs_package_sync ]; then

	skip_packages=1

fi

# Second upgrade stage

[ -z "$skip_packages" ] \

	&& /usr/local/sbin/${product}-upgrade -y -U -b 2

# Copy default openssl config file

[ -d /etc/ssl ] \

	|| mkdir -p /etc/ssl

[ -f /usr/local/share/${product}/ssl/openssl.cnf ] \

	&& cp -f /usr/local/share/${product}/ssl/openssl.cnf /etc/ssl

mkdir -p /usr/local/openssl >/dev/null 2>&1

ln -sf /etc/ssl/openssl.cnf \

	/usr/local/openssl/openssl.cnf

# Run the php.ini setup file and populate

# /usr/local/etc/php.ini

/etc/rc.php_ini_setup 2>/tmp/php_errors.txt

/usr/local/sbin/php-fpm -c /usr/local/etc/php.ini -y /usr/local/lib/php-fpm.conf -RD 2>&1 >/dev/null

# Launch external configuration loader

/usr/local/sbin/fcgicli -f /etc/ecl.php

if [ -f /etc/rc.custom_boot_early ]; then

	/bin/echo -n "Launching /etc/rc.custom_boot_early...";

	/etc/rc.custom_boot_early

	echo "Done"

fi

export fcgipath=/var/run/php-fpm.socket

/usr/bin/nice -n20 /usr/local/sbin/check_reload_status

# let the PHP-based configuration subsystem set up the system now

echo -n "Launching the init system..."

/bin/rm -f /cf/conf/backup/backup.cache

/usr/bin/touch $varrunpath/booting

# Copy custom logo over if it's present

if [ -d /usr/local/share/${product}/custom_logos ]; then

	cp -f /usr/local/share/${product}/custom_logos/*svg \

		/usr/local/www

	cp -f /usr/local/share/${product}/custom_logos/*css \

		/usr/local/www/css

fi

# Apply CPU microcode update

[ -x /usr/local/etc/rc.d/microcode_update ] \

	&& /usr/local/etc/rc.d/microcode_update onestart

/etc/rc.bootup

# /etc/rc.bootup unset $g['booting'], and removes file

# Be sure the file is removed to not create troubles after

if [ -f $varrunpath/booting ]; then

	/bin/rm $varrunpath/booting

fi

echo -n "Starting CRON... "

cd /tmp && /usr/sbin/cron -s 2>/dev/null

echo "done."

/bin/rm -rf /usr/local/pkg/pf/CVS

# Start ping handler every 240 seconds

/usr/local/bin/minicron 240 $varrunpath/ping_hosts.pid /usr/local/bin/ping_hosts.sh

# Start account expire handler every hour

/usr/local/bin/minicron 3600 $varrunpath/expire_accounts.pid '/usr/local/sbin/fcgicli -f /etc/rc.expireaccounts'

# Start alias url updater every 24 hours

/usr/local/bin/minicron 86400 $varrunpath/update_alias_url_data.pid '/usr/local/sbin/fcgicli -f /etc/rc.update_alias_url_data'

/bin/chmod a+rw /tmp/.

# Check for GEOM mirrors

GMIRROR_STATUS=`/sbin/gmirror status`

if [ "${GMIRROR_STATUS}" != "" ]; then

	# Using a flag file at bootup saves an expensive exec/check on each page load.

	/usr/bin/touch /var/run/gmirror_active

	# Setup monitoring/notifications

	/usr/local/bin/minicron 60 /var/run/gmirror_status_check.pid /usr/local/sbin/gmirror_status_check.php

fi

[ -z "$skip_packages" ] \

	&& /usr/local/sbin/${product}-upgrade -y -U -b 3

# Start packages

[ -z "$skip_packages" ] \

	&& /usr/local/sbin/fcgicli -f /etc/rc.start_packages

# Update pkg metadata

/etc/rc.update_pkg_metadata now

# Log product version to syslog

get_version

BUILDTIME=`cat /etc/version.buildtime`

ARCH=`uname -m`

echo "$product ${version}${version_patch} $ARCH $BUILDTIME"

echo "Bootup complete"

/usr/local/bin/beep.sh start 2>&1 >/dev/null

# Reset the cache.  read-only requires this.

/bin/rm -f /tmp/config.cache

exit 0