|
1
|
<?php
|
|
2
|
/* $Id$ */
|
|
3
|
/*
|
|
4
|
system_advanced.php
|
|
5
|
part of pfSense
|
|
6
|
Copyright (C) 2005-2007 Scott Ullrich
|
|
7
|
|
|
8
|
originally part of m0n0wall (http://m0n0.ch/wall)
|
|
9
|
Copyright (C) 2003-2004 Manuel Kasper <mk@neon1.net>.
|
|
10
|
All rights reserved.
|
|
11
|
|
|
12
|
Redistribution and use in source and binary forms, with or without
|
|
13
|
modification, are permitted provided that the following conditions are met:
|
|
14
|
|
|
15
|
1. Redistributions of source code must retain the above copyright notice,
|
|
16
|
this list of conditions and the following disclaimer.
|
|
17
|
|
|
18
|
2. Redistributions in binary form must reproduce the above copyright
|
|
19
|
notice, this list of conditions and the following disclaimer in the
|
|
20
|
documentation and/or other materials provided with the distribution.
|
|
21
|
|
|
22
|
THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
23
|
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
|
|
24
|
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
25
|
AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
|
|
26
|
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
27
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
28
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
29
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
30
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
31
|
POSSIBILITY OF SUCH DAMAGE.
|
|
32
|
*/
|
|
33
|
|
|
34
|
require("guiconfig.inc");
|
|
35
|
|
|
36
|
$pconfig['disablefilter'] = $config['system']['disablefilter'];
|
|
37
|
$pconfig['rfc959workaround'] = $config['system']['rfc959workaround'];
|
|
38
|
$pconfig['scrubnodf'] = $config['system']['scrubnodf'];
|
|
39
|
$pconfig['ipv6nat_enable'] = isset($config['diag']['ipv6nat']['enable']);
|
|
40
|
$pconfig['ipv6nat_ipaddr'] = $config['diag']['ipv6nat']['ipaddr'];
|
|
41
|
$pconfig['cert'] = base64_decode($config['system']['webgui']['certificate']);
|
|
42
|
$pconfig['key'] = base64_decode($config['system']['webgui']['private-key']);
|
|
43
|
$pconfig['disableconsolemenu'] = isset($config['system']['disableconsolemenu']);
|
|
44
|
$pconfig['harddiskstandby'] = $config['system']['harddiskstandby'];
|
|
45
|
$pconfig['noantilockout'] = isset($config['system']['webgui']['noantilockout']);
|
|
46
|
$pconfig['filteringbridge_enable'] = isset($config['bridge']['filteringbridge']);
|
|
47
|
$pconfig['tcpidletimeout'] = $config['filter']['tcpidletimeout'];
|
|
48
|
$pconfig['maximumstates'] = $config['system']['maximumstates'];
|
|
49
|
$pconfig['disablerendevouz'] = $config['system']['disablerendevouz'];
|
|
50
|
$pconfig['enableserial'] = $config['system']['enableserial'];
|
|
51
|
$pconfig['disablefirmwarecheck'] = isset($config['system']['disablefirmwarecheck']);
|
|
52
|
$pconfig['preferoldsa_enable'] = isset($config['ipsec']['preferoldsa']);
|
|
53
|
$pconfig['enablesshd'] = $config['system']['enablesshd'];
|
|
54
|
$pconfig['sshport'] = $config['system']['ssh']['port'];
|
|
55
|
$pconfig['sharednet'] = $config['system']['sharednet'];
|
|
56
|
$pconfig['polling_enable'] = isset($config['system']['polling']);
|
|
57
|
$pconfig['bypassstaticroutes'] = isset($config['filter']['bypassstaticroutes']);
|
|
58
|
$pconfig['disablenatreflection'] = $config['system']['disablenatreflection'];
|
|
59
|
$pconfig['disablechecksumoffloading'] = isset($config['system']['disablechecksumoffloading']);
|
|
60
|
$pconfig['disablescrub'] = isset($config['system']['disablescrub']);
|
|
61
|
|
|
62
|
if ($_POST) {
|
|
63
|
|
|
64
|
unset($input_errors);
|
|
65
|
$pconfig = $_POST;
|
|
66
|
|
|
67
|
/* input validation */
|
|
68
|
if ($_POST['ipv6nat_enable'] && !is_ipaddr($_POST['ipv6nat_ipaddr'])) {
|
|
69
|
$input_errors[] = "You must specify an IP address to NAT IPv6 packets.";
|
|
70
|
}
|
|
71
|
if ($_POST['maximumstates'] && !is_numericint($_POST['maximumstates'])) {
|
|
72
|
$input_errors[] = "The Firewall Maximum States value must be an integer.";
|
|
73
|
}
|
|
74
|
if ($_POST['tcpidletimeout'] && !is_numericint($_POST['tcpidletimeout'])) {
|
|
75
|
$input_errors[] = "The TCP idle timeout must be an integer.";
|
|
76
|
}
|
|
77
|
if (($_POST['cert'] && !$_POST['key']) || ($_POST['key'] && !$_POST['cert'])) {
|
|
78
|
$input_errors[] = "Certificate and key must always be specified together.";
|
|
79
|
} else if ($_POST['cert'] && $_POST['key']) {
|
|
80
|
if (!strstr($_POST['cert'], "BEGIN CERTIFICATE") || !strstr($_POST['cert'], "END CERTIFICATE"))
|
|
81
|
$input_errors[] = "This certificate does not appear to be valid.";
|
|
82
|
if (!strstr($_POST['key'], "BEGIN RSA PRIVATE KEY") || !strstr($_POST['key'], "END RSA PRIVATE KEY"))
|
|
83
|
$input_errors[] = "This key does not appear to be valid.";
|
|
84
|
if ($_POST['altfirmwareurl'])
|
|
85
|
if ($_POST['firmwareurl'] == "" || $_POST['firmwarename'] == "")
|
|
86
|
$input_errors[] = "You must specify a base URL and a filename for the alternate firmware.";
|
|
87
|
if ($_POST['altpkgconfigurl'])
|
|
88
|
if ($_POST['pkgconfig_base_url'] == "" || $_POST['pkgconfig_filename'] == "")
|
|
89
|
$input_errors[] = "You must specifiy and base URL and a filename before using an alternate pkg_config.xml.";
|
|
90
|
}
|
|
91
|
if ($_POST['maximumstates'] <> "") {
|
|
92
|
if ($_POST['maximumstates'] < 1000)
|
|
93
|
$input_errors[] = "States must be above 1000 and below 100000000";
|
|
94
|
if ($_POST['maximumstates'] > 100000000)
|
|
95
|
$input_errors[] = "States must be above 1000 and below 100000000";
|
|
96
|
}
|
|
97
|
if ($_POST['sshport'] <> "") {
|
|
98
|
if( ! is_port($_POST['sshport'])) {
|
|
99
|
$input_errors[] = "You must specify a valid port number";
|
|
100
|
}
|
|
101
|
}
|
|
102
|
|
|
103
|
}
|
|
104
|
|
|
105
|
if ($_POST) {
|
|
106
|
ob_flush();
|
|
107
|
flush();
|
|
108
|
if (!$input_errors) {
|
|
109
|
if($_POST['disablefilter'] == "yes") {
|
|
110
|
$config['system']['disablefilter'] = "enabled";
|
|
111
|
} else {
|
|
112
|
unset($config['system']['disablefilter']);
|
|
113
|
}
|
|
114
|
if($_POST['enablesshd'] == "yes") {
|
|
115
|
$config['system']['enablesshd'] = "enabled";
|
|
116
|
touch("{$g['tmp_path']}/start_sshd");
|
|
117
|
} else {
|
|
118
|
unset($config['system']['enablesshd']);
|
|
119
|
mwexec("/usr/bin/killall sshd");
|
|
120
|
}
|
|
121
|
$oldsshport = $config['system']['ssh']['port'];
|
|
122
|
$config['system']['ssh']['port'] = $_POST['sshport'];
|
|
123
|
|
|
124
|
if($_POST['polling_enable'] == "yes") {
|
|
125
|
$config['system']['polling'] = true;
|
|
126
|
setup_polling();
|
|
127
|
} else {
|
|
128
|
unset($config['system']['polling']);
|
|
129
|
setup_polling();
|
|
130
|
}
|
|
131
|
|
|
132
|
if($_POST['sharednet'] == "yes") {
|
|
133
|
$config['system']['sharednet'] = true;
|
|
134
|
system_disable_arp_wrong_if();
|
|
135
|
} else {
|
|
136
|
unset($config['system']['sharednet']);
|
|
137
|
system_enable_arp_wrong_if();
|
|
138
|
}
|
|
139
|
|
|
140
|
if($_POST['scrubnodf'] == "yes")
|
|
141
|
$config['system']['scrubnodf'] = "enabled";
|
|
142
|
else
|
|
143
|
unset($config['system']['scrubnodf']);
|
|
144
|
|
|
145
|
if($_POST['rfc959workaround'] == "yes")
|
|
146
|
$config['system']['rfc959workaround'] = "enabled";
|
|
147
|
else
|
|
148
|
unset($config['system']['rfc959workaround']);
|
|
149
|
|
|
150
|
if($_POST['ipv6nat_enable'] == "yes") {
|
|
151
|
$config['diag']['ipv6nat']['enable'] = true;
|
|
152
|
$config['diag']['ipv6nat']['ipaddr'] = $_POST['ipv6nat_ipaddr'];
|
|
153
|
} else {
|
|
154
|
unset($config['diag']['ipv6nat']['enable']);
|
|
155
|
unset($config['diag']['ipv6nat']['ipaddr']);
|
|
156
|
}
|
|
157
|
$oldcert = $config['system']['webgui']['certificate'];
|
|
158
|
$oldkey = $config['system']['webgui']['private-key'];
|
|
159
|
$config['system']['webgui']['certificate'] = base64_encode($_POST['cert']);
|
|
160
|
$config['system']['webgui']['private-key'] = base64_encode($_POST['key']);
|
|
161
|
if($_POST['disableconsolemenu'] == "yes") {
|
|
162
|
$config['system']['disableconsolemenu'] = true;
|
|
163
|
auto_login(true);
|
|
164
|
} else {
|
|
165
|
unset($config['system']['disableconsolemenu']);
|
|
166
|
auto_login(false);
|
|
167
|
}
|
|
168
|
unset($config['system']['webgui']['expanddiags']);
|
|
169
|
$config['system']['optimization'] = $_POST['optimization'];
|
|
170
|
|
|
171
|
if($_POST['disablefirmwarecheck'] == "yes")
|
|
172
|
$config['system']['disablefirmwarecheck'] = true;
|
|
173
|
else
|
|
174
|
unset($config['system']['disablefirmwarecheck']);
|
|
175
|
|
|
176
|
if ($_POST['enableserial'] == "yes")
|
|
177
|
$config['system']['enableserial'] = true;
|
|
178
|
else
|
|
179
|
unset($config['system']['enableserial']);
|
|
180
|
|
|
181
|
if($_POST['harddiskstandby'] <> "") {
|
|
182
|
$config['system']['harddiskstandby'] = $_POST['harddiskstandby'];
|
|
183
|
system_set_harddisk_standby();
|
|
184
|
} else
|
|
185
|
unset($config['system']['harddiskstandby']);
|
|
186
|
|
|
187
|
if ($_POST['noantilockout'] == "yes")
|
|
188
|
$config['system']['webgui']['noantilockout'] = true;
|
|
189
|
else
|
|
190
|
unset($config['system']['webgui']['noantilockout']);
|
|
191
|
|
|
192
|
/* Firewall and ALTQ options */
|
|
193
|
$config['system']['maximumstates'] = $_POST['maximumstates'];
|
|
194
|
|
|
195
|
if($_POST['enablesshd'] == "yes") {
|
|
196
|
$config['system']['enablesshd'] = $_POST['enablesshd'];
|
|
197
|
} else {
|
|
198
|
unset($config['system']['enablesshd']);
|
|
199
|
}
|
|
200
|
|
|
201
|
if($_POST['disablechecksumoffloading'] == "yes") {
|
|
202
|
$config['system']['disablechecksumoffloading'] = $_POST['disablechecksumoffloading'];
|
|
203
|
} else {
|
|
204
|
unset($config['system']['disablechecksumoffloading']);
|
|
205
|
}
|
|
206
|
|
|
207
|
if($_POST['disablescrub'] == "yes") {
|
|
208
|
$config['system']['disablescrub'] = $_POST['disablescrub'];
|
|
209
|
} else {
|
|
210
|
unset($config['system']['disablescrub']);
|
|
211
|
}
|
|
212
|
|
|
213
|
if($_POST['disablenatreflection'] == "yes") {
|
|
214
|
$config['system']['disablenatreflection'] = $_POST['disablenatreflection'];
|
|
215
|
} else {
|
|
216
|
unset($config['system']['disablenatreflection']);
|
|
217
|
}
|
|
218
|
|
|
219
|
$config['ipsec']['preferoldsa'] = $_POST['preferoldsa_enable'] ? true : false;
|
|
220
|
$config['bridge']['filteringbridge'] = $_POST['filteringbridge_enable'] ? true : false;
|
|
221
|
$config['filter']['bypassstaticroutes'] = $_POST['bypassstaticroutes'] ? true : false;
|
|
222
|
|
|
223
|
write_config();
|
|
224
|
|
|
225
|
$retval = 0;
|
|
226
|
config_lock();
|
|
227
|
$retval = filter_configure();
|
|
228
|
if(stristr($retval, "error") <> true)
|
|
229
|
$savemsg = get_std_save_message($retval);
|
|
230
|
else
|
|
231
|
$savemsg = $retval;
|
|
232
|
|
|
233
|
config_unlock();
|
|
234
|
|
|
235
|
setup_filter_bridge();
|
|
236
|
|
|
237
|
conf_mount_rw();
|
|
238
|
|
|
239
|
setup_serial_port();
|
|
240
|
|
|
241
|
setup_filter_bridge();
|
|
242
|
|
|
243
|
conf_mount_ro();
|
|
244
|
|
|
245
|
|
|
246
|
}
|
|
247
|
}
|
|
248
|
|
|
249
|
$pgtitle = "System: Advanced functions";
|
|
250
|
include("head.inc");
|
|
251
|
|
|
252
|
?>
|
|
253
|
|
|
254
|
<body link="#0000CC" vlink="#0000CC" alink="#0000CC">
|
|
255
|
|
|
256
|
<?php include("fbegin.inc"); ?>
|
|
257
|
|
|
258
|
<p class="pgtitle"><?=$pgtitle?></p>
|
|
259
|
|
|
260
|
<form action="system_advanced.php" method="post" name="iform" id="iform">
|
|
261
|
<?php if ($input_errors) print_input_errors($input_errors); ?>
|
|
262
|
<?php if ($savemsg) print_info_box($savemsg); ?>
|
|
263
|
<p><span class="vexpl"><span class="red"><strong>Note: </strong></span>the options on this page are intended for use by advanced users only.</span></p>
|
|
264
|
<br />
|
|
265
|
|
|
266
|
<table width="100%" border="0" cellpadding="6" cellspacing="0">
|
|
267
|
<tbody>
|
|
268
|
<?php if($g['platform'] == "pfSense" || $g['platform'] == "cdrom"): ?>
|
|
269
|
<tr>
|
|
270
|
<td colspan="2" valign="top" class="listtopic">Enable Serial Console</td>
|
|
271
|
</tr>
|
|
272
|
<tr>
|
|
273
|
<td width="22%" valign="top" class="vncell"> </td>
|
|
274
|
<td width="78%" class="vtable">
|
|
275
|
<input name="enableserial" type="checkbox" id="enableserial" value="yes" <?php if (isset($pconfig['enableserial'])) echo "checked"; ?> onclick="enable_change(false)" />
|
|
276
|
<strong>This will enable the first serial port with 9600/8/N/1</strong>
|
|
277
|
<br>
|
|
278
|
<span class="vexpl">Note: This will disable the internal video card/keyboard</span>
|
|
279
|
</td>
|
|
280
|
</tr>
|
|
281
|
<tr>
|
|
282
|
<td width="22%" valign="top"> </td>
|
|
283
|
<td width="78%"><input name="Submit" type="submit" class="formbtn" value="Save" onclick="enable_change(true)" /></td>
|
|
284
|
</tr>
|
|
285
|
</tr>
|
|
286
|
<tr>
|
|
287
|
<td colspan="2" class="list" height="12"></td>
|
|
288
|
</tr>
|
|
289
|
<?php endif; ?>
|
|
290
|
<tr>
|
|
291
|
<td colspan="2" valign="top" class="listtopic">Secure Shell</td>
|
|
292
|
</tr>
|
|
293
|
<tr>
|
|
294
|
<td width="22%" valign="top" class="vncell"> </td>
|
|
295
|
<td width="78%" class="vtable">
|
|
296
|
<input name="enablesshd" type="checkbox" id="enablesshd" value="yes" <?php if (isset($pconfig['enablesshd'])) echo "checked"; ?> onclick="enable_change(false)" />
|
|
297
|
<strong>Enable Secure Shell</strong>
|
|
298
|
</td>
|
|
299
|
</tr>
|
|
300
|
<tr>
|
|
301
|
<td width="22%" valign="top" class="vncell">SSH port</td>
|
|
302
|
<td width="78%" class="vtable">
|
|
303
|
<input name="sshport" type="text" id="sshport" value="<?php echo $pconfig['sshport']; ?>" onclick="enable_change(false)" />
|
|
304
|
<br />
|
|
305
|
<span class="vexpl">Note: Leave this blank for the default of 22</span>
|
|
306
|
</td>
|
|
307
|
</tr>
|
|
308
|
<tr>
|
|
309
|
<td width="22%" valign="top"> </td>
|
|
310
|
<td width="78%">
|
|
311
|
<input name="Submit" type="submit" class="formbtn" value="Save" onclick="enable_change(true)" />
|
|
312
|
</td>
|
|
313
|
</tr>
|
|
314
|
<tr>
|
|
315
|
<td colspan="2" class="list" height="12"> </td>
|
|
316
|
</tr>
|
|
317
|
<tr>
|
|
318
|
<td colspan="2" valign="top" class="listtopic">Shared Physical Network</td>
|
|
319
|
</tr>
|
|
320
|
<tr>
|
|
321
|
<td width="22%" valign="top" class="vncell"> </td>
|
|
322
|
<td width="78%" class="vtable">
|
|
323
|
<input name="sharednet" type="checkbox" id="sharednet" value="yes" <?php if (isset($pconfig['sharednet'])) echo "checked"; ?> onclick="enable_change(false)" />
|
|
324
|
<strong>This will suppress ARP messages when interfaces share the same physical network</strong>
|
|
325
|
</td>
|
|
326
|
</tr>
|
|
327
|
<tr>
|
|
328
|
<td width="22%" valign="top"> </td>
|
|
329
|
<td width="78%">
|
|
330
|
<input name="Submit" type="submit" class="formbtn" value="Save" onclick="enable_change(true)" />
|
|
331
|
</td>
|
|
332
|
</tr>
|
|
333
|
<tr>
|
|
334
|
<td colspan="2" class="list" height="12"> </td>
|
|
335
|
</tr>
|
|
336
|
<tr>
|
|
337
|
<td colspan="2" valign="top" class="listtopic">IPv6 tunneling</td>
|
|
338
|
</tr>
|
|
339
|
<tr>
|
|
340
|
<td width="22%" valign="top" class="vncell"> </td>
|
|
341
|
<td width="78%" class="vtable">
|
|
342
|
<input name="ipv6nat_enable" type="checkbox" id="ipv6nat_enable" value="yes" <?php if ($pconfig['ipv6nat_enable']) echo "checked"; ?> onclick="enable_change(false)" />
|
|
343
|
<strong>NAT encapsulated IPv6 packets (IP protocol 41/RFC2893) to:</strong>
|
|
344
|
<br /> <br />
|
|
345
|
<input name="ipv6nat_ipaddr" type="text" class="formfld" id="ipv6nat_ipaddr" size="20" value="<?=htmlspecialchars($pconfig['ipv6nat_ipaddr']);?>" />
|
|
346
|
(IP address)<span class="vexpl"><br /> Don't forget to add a firewall rule to permit IPv6 packets!</span>
|
|
347
|
</td>
|
|
348
|
</tr>
|
|
349
|
<tr>
|
|
350
|
<td colspan="2" class="list" height="12"> </td>
|
|
351
|
</tr>
|
|
352
|
<tr>
|
|
353
|
<td colspan="2" valign="top" class="listtopic">Filtering Bridge</td>
|
|
354
|
</tr>
|
|
355
|
<tr>
|
|
356
|
<td width="22%" valign="top" class="vncell"> </td>
|
|
357
|
<td width="78%" class="vtable">
|
|
358
|
<input name="filteringbridge_enable" type="checkbox" id="filteringbridge_enable" value="yes" <?php if ($pconfig['filteringbridge_enable']) echo "checked"; ?>>
|
|
359
|
<strong>Enable filtering bridge</strong><span class="vexpl"><br>
|
|
360
|
This will cause bridged packets to pass through the packet
|
|
361
|
filter in the same way as routed packets do (by default bridged
|
|
362
|
packets are always passed). If you enable this option, you'll
|
|
363
|
have to add filter rules to selectively permit traffic from
|
|
364
|
bridged interfaces.</span></td>
|
|
365
|
</tr>
|
|
366
|
<tr>
|
|
367
|
<td width="22%" valign="top"> </td>
|
|
368
|
<td width="78%">
|
|
369
|
<input name="Submit" type="submit" class="formbtn" value="Save" onclick="enable_change(true)" />
|
|
370
|
</td>
|
|
371
|
</tr>
|
|
372
|
<tr>
|
|
373
|
<td colspan="2" class="list" height="12"> </td>
|
|
374
|
</tr>
|
|
375
|
<tr>
|
|
376
|
<td colspan="2" valign="top" class="listtopic">webGUI SSL certificate/key</td>
|
|
377
|
</tr>
|
|
378
|
<tr>
|
|
379
|
<td width="22%" valign="top" class="vncell">Certificate</td>
|
|
380
|
<td width="78%" class="vtable">
|
|
381
|
<textarea name="cert" cols="65" rows="7" id="cert" class="formpre"><?=htmlspecialchars($pconfig['cert']);?></textarea>
|
|
382
|
<br />
|
|
383
|
Paste a signed certificate in X.509 PEM format here. <a href="javascript:if(openwindow('system_advanced_create_certs.php') == false) alert('Popup blocker detected. Action aborted.');" >Create</a> certificates automatically.
|
|
384
|
</td>
|
|
385
|
</tr>
|
|
386
|
<tr>
|
|
387
|
<td width="22%" valign="top" class="vncell">Key</td>
|
|
388
|
<td width="78%" class="vtable">
|
|
389
|
<textarea name="key" cols="65" rows="7" id="key" class="formpre"><?=htmlspecialchars($pconfig['key']);?></textarea>
|
|
390
|
<br />
|
|
391
|
Paste an RSA private key in PEM format here.
|
|
392
|
</td>
|
|
393
|
</tr>
|
|
394
|
<tr>
|
|
395
|
<td width="22%" valign="top"> </td>
|
|
396
|
<td width="78%">
|
|
397
|
<input name="Submit" type="submit" class="formbtn" value="Save" onclick="enable_change(true)" />
|
|
398
|
</td>
|
|
399
|
</tr>
|
|
400
|
<tr>
|
|
401
|
<td colspan="2" class="list" height="12"> </td>
|
|
402
|
</tr>
|
|
403
|
<tr>
|
|
404
|
<td colspan="2" valign="top" class="listtopic">Miscellaneous</td>
|
|
405
|
</tr>
|
|
406
|
|
|
407
|
<tr>
|
|
408
|
<td width="22%" valign="top" class="vncell">Device polling</td>
|
|
409
|
<td width="78%" class="vtable">
|
|
410
|
<input name="polling_enable" type="checkbox" id="polling_enable" value="yes" <?php if ($pconfig['polling_enable']) echo "checked"; ?>>
|
|
411
|
<strong>Use device polling</strong><br>
|
|
412
|
Device polling is a technique that lets the system periodically poll network devices for new
|
|
413
|
data instead of relying on interrupts. This can reduce CPU load and therefore increase
|
|
414
|
throughput, at the expense of a slightly higher forwarding delay (the devices are polled 1000 times
|
|
415
|
per second). Not all NICs support polling; see the pfSense homepage for a list of supported cards.
|
|
416
|
</td>
|
|
417
|
</tr>
|
|
418
|
|
|
419
|
<tr>
|
|
420
|
<td width="22%" valign="top" class="vncell">Console menu </td>
|
|
421
|
<td width="78%" class="vtable">
|
|
422
|
<input name="disableconsolemenu" type="checkbox" id="disableconsolemenu" value="yes" <?php if ($pconfig['disableconsolemenu']) echo "checked"; ?> />
|
|
423
|
<strong>Disable console menu</strong>
|
|
424
|
<br />
|
|
425
|
<span class="vexpl">Changes to this option will take effect after a reboot.</span>
|
|
426
|
</td>
|
|
427
|
</tr>
|
|
428
|
<?php if($g['platform'] == "pfSenseDISABLED"): ?>
|
|
429
|
<tr>
|
|
430
|
<td width="22%" valign="top" class="vncell">Hard disk standby time </td>
|
|
431
|
<td width="78%" class="vtable">
|
|
432
|
<select name="harddiskstandby" class="formfld">
|
|
433
|
<?php
|
|
434
|
## Values from ATA-2 http://www.t13.org/project/d0948r3-ATA-2.pdf (Page 66)
|
|
435
|
$sbvals = explode(" ", "0.5,6 1,12 2,24 3,36 4,48 5,60 7.5,90 10,120 15,180 20,240 30,241 60,242");
|
|
436
|
?>
|
|
437
|
<option value="" <?php if(!$pconfig['harddiskstandby']) echo('selected');?>>Always on</option>
|
|
438
|
<?php
|
|
439
|
foreach ($sbvals as $sbval):
|
|
440
|
list($min,$val) = explode(",", $sbval); ?>
|
|
441
|
<option value="<?=$val;?>" <?php if($pconfig['harddiskstandby'] == $val) echo('selected');?>><?=$min;?> minutes</option>
|
|
442
|
<?php endforeach; ?>
|
|
443
|
</select>
|
|
444
|
<br />
|
|
445
|
Puts the hard disk into standby mode when the selected amount of time after the last
|
|
446
|
access has elapsed. <em>Do not set this for CF cards.</em>
|
|
447
|
</td>
|
|
448
|
</tr>
|
|
449
|
<?php endif; ?>
|
|
450
|
<tr>
|
|
451
|
<td width="22%" valign="top" class="vncell">webGUI anti-lockout</td>
|
|
452
|
<td width="78%" class="vtable">
|
|
453
|
<input name="noantilockout" type="checkbox" id="noantilockout" value="yes" <?php if ($pconfig['noantilockout']) echo "checked"; ?> />
|
|
454
|
<strong>Disable webGUI anti-lockout rule</strong>
|
|
455
|
<br />
|
|
456
|
By default, access to the webGUI on the LAN interface is always permitted, regardless of the user-defined filter
|
|
457
|
rule set. Enable this feature to control webGUI access (make sure to have a filter rule in place that allows you
|
|
458
|
in, or you will lock yourself out!).
|
|
459
|
<br />
|
|
460
|
Hint: the "set LAN IP address" option in the console menu resets this setting as well.
|
|
461
|
</td>
|
|
462
|
</tr>
|
|
463
|
<tr>
|
|
464
|
<td width="22%" valign="top" class="vncell">Static route filtering</td>
|
|
465
|
<td width="78%" class="vtable">
|
|
466
|
<input name="bypassstaticroutes" type="checkbox" id="bypassstaticroutes" value="yes" <?php if ($pconfig['bypassstaticroutes']) echo "checked"; ?> />
|
|
467
|
<strong>Bypass firewall rules for traffic on the same interface</strong>
|
|
468
|
<br />
|
|
469
|
This option only applies if you have defined one or more static routes. If it is enabled, traffic that enters and
|
|
470
|
leaves through the same interface will not be checked by the firewall. This may be desirable in some situations where
|
|
471
|
multiple subnets are connected to the same interface.
|
|
472
|
<br />
|
|
473
|
</td>
|
|
474
|
</tr>
|
|
475
|
<tr>
|
|
476
|
<td width="22%" valign="top" class="vncell">IPsec SA preferral</td>
|
|
477
|
<td width="78%" class="vtable">
|
|
478
|
<input name="preferoldsa_enable" type="checkbox" id="preferoldsa_enable" value="yes" <?php if ($pconfig['preferoldsa_enable']) echo "checked"; ?> />
|
|
479
|
<strong>Prefer old IPsec SAs</strong>
|
|
480
|
<br />
|
|
481
|
By default, if several SAs match, the newest one is preferred if it's at least 30 seconds old.Select this option to always prefer old SAs over new ones.
|
|
482
|
</td>
|
|
483
|
</tr>
|
|
484
|
<tr>
|
|
485
|
<td width="22%" valign="top"> </td>
|
|
486
|
<td width="78%">
|
|
487
|
<input name="Submit" type="submit" class="formbtn" value="Save" onclick="enable_change(true)" />
|
|
488
|
</td>
|
|
489
|
</tr>
|
|
490
|
<tr>
|
|
491
|
<td colspan="2" class="list" height="12"> </td>
|
|
492
|
</tr>
|
|
493
|
<tr>
|
|
494
|
<td colspan="2" valign="top" class="listtopic">Traffic Shaper and Firewall Advanced</td>
|
|
495
|
</tr>
|
|
496
|
<tr>
|
|
497
|
<td width="22%" valign="top" class="vncell">FTP RFC 959 data port violation workaround</td>
|
|
498
|
<td width="78%" class="vtable">
|
|
499
|
<input name="rfc959workaround" type="checkbox" id="rfc959workaround" value="yes" <?php if (isset($config['system']['rfc959workaround'])) echo "checked"; ?> onclick="enable_change(false)" />
|
|
500
|
<strong class="vexpl">Workaround for sites that violate RFC 959 which specifies that the data connection be sourced from the command port - 1 (typically port 20). This workaround doesn't expose you to any extra risk as the firewall will still only allow connections on a port that the ftp-proxy is listening on.</strong>
|
|
501
|
<br />
|
|
502
|
</td>
|
|
503
|
</tr>
|
|
504
|
<tr>
|
|
505
|
<td width="22%" valign="top" class="vncell">Clear DF bit instead of dropping</td>
|
|
506
|
<td width="78%" class="vtable">
|
|
507
|
<input name="scrubnodf" type="checkbox" id="scrubnodf" value="yes" <?php if (isset($config['system']['scrubnodf'])) echo "checked"; ?> onclick="enable_change(false)" />
|
|
508
|
<strong class="vexpl">Workaround for operating systems that generate fragmented packets with the don't fragment (DF) bit set. Linux NFS is known to do this. This will cause the filter to not drop such packets but instead clear the don't fragment bit. The filter will also randomize the IP identification field of outgoing packets with this option on, to compensate for operating systems that set the DF bit but set a zero IP identification header field.</strong>
|
|
509
|
<br />
|
|
510
|
</td>
|
|
511
|
</tr>
|
|
512
|
<tr>
|
|
513
|
<td width="22%" valign="top" class="vncell">Firewall Optimization Options</td>
|
|
514
|
<td width="78%" class="vtable">
|
|
515
|
<select onChange="update_description(this.selectedIndex);" name="optimization" id="optimization">
|
|
516
|
<option value="normal"<?php if($config['system']['optimization']=="normal") echo " selected"; ?>>normal</option>
|
|
517
|
<option value="high-latency"<?php if($config['system']['optimization']=="high-latency") echo " selected"; ?>>high-latency</option>
|
|
518
|
<option value="aggressive"<?php if($config['system']['optimization']=="aggressive") echo " selected"; ?>>aggressive</option>
|
|
519
|
<option value="conservative"<?php if($config['system']['optimization']=="conservative") echo " selected"; ?>>conservative</option>
|
|
520
|
</select>
|
|
521
|
<br />
|
|
522
|
<textarea cols="60" rows="2" id="info" name="info"style="padding:5px; border:1px dashed #990000; background-color: #ffffff; color: #000000; font-size: 8pt;"></textarea>
|
|
523
|
<script language="javascript" type="text/javascript">
|
|
524
|
update_description(document.forms[0].optimization.selectedIndex);
|
|
525
|
</script>
|
|
526
|
<br />
|
|
527
|
<span class="vexpl"><b>Select which type of state table optimization your would like to use</b></span>
|
|
528
|
</td>
|
|
529
|
</tr>
|
|
530
|
<tr>
|
|
531
|
<td width="22%" valign="top" class="vncell">Disable Firewall</td>
|
|
532
|
<td width="78%" class="vtable">
|
|
533
|
<input name="disablefilter" type="checkbox" id="disablefilter" value="yes" <?php if (isset($config['system']['disablefilter'])) echo "checked"; ?> onclick="enable_change(false)" />
|
|
534
|
<strong>Disable the firewalls filter altogether.</strong>
|
|
535
|
<br />
|
|
536
|
<span class="vexpl">Note: This basically converts pfSense into a routing only platform!<br>
|
|
537
|
Note: This will turn off NAT!
|
|
538
|
</span>
|
|
539
|
</td>
|
|
540
|
</tr>
|
|
541
|
<tr>
|
|
542
|
<td width="22%" valign="top" class="vncell">Disable Firewall Scrub</td>
|
|
543
|
<td width="78%" class="vtable">
|
|
544
|
<input name="disablescrub" type="checkbox" id="disablescrub" value="yes" <?php if (isset($config['system']['disablescrub'])) echo "checked"; ?> onclick="enable_change(false)" />
|
|
545
|
<strong>Disables the PF scrubbing option which can sometimes interfere with NFS and PPTP traffic.</strong>
|
|
546
|
<br/>
|
|
547
|
Click <a href='http://www.openbsd.org/faq/pf/scrub.html' target='_new'>here</a> for more information.
|
|
548
|
</td>
|
|
549
|
</tr>
|
|
550
|
<tr>
|
|
551
|
<td width="22%" valign="top" class="vncell">Firewall Maximum States</td>
|
|
552
|
<td width="78%" class="vtable">
|
|
553
|
<input name="maximumstates" type="text" id="maximumstates" value="<?php echo $pconfig['maximumstates']; ?>" onclick="enable_change(false)" />
|
|
554
|
<br />
|
|
555
|
<strong>Maximum number of connections to hold in the firewall state table.</strong>
|
|
556
|
<br />
|
|
557
|
<span class="vexpl">Note: Leave this blank for the default of 10000</span>
|
|
558
|
</td>
|
|
559
|
</tr>
|
|
560
|
<tr>
|
|
561
|
<td width="22%" valign="top"> </td>
|
|
562
|
<td width="78%"><input name="Submit" type="submit" class="formbtn" value="Save" onclick="enable_change(true)" /></td>
|
|
563
|
</tr>
|
|
564
|
<tr>
|
|
565
|
<td colspan="2" class="list" height="12"> </td>
|
|
566
|
</tr>
|
|
567
|
<tr>
|
|
568
|
<td colspan="2" valign="top" class="listtopic">Network Address Translation</td>
|
|
569
|
</tr>
|
|
570
|
<tr>
|
|
571
|
<td width="22%" valign="top" class="vncell">Disable NAT Reflection</td>
|
|
572
|
<td width="78%" class="vtable">
|
|
573
|
<input name="disablenatreflection" type="checkbox" id="disablenatreflection" value="yes" <?php if (isset($config['system']['disablenatreflection'])) echo "checked"; ?> onclick="enable_change(false)" />
|
|
574
|
<strong>Disables the automatic creation of NAT redirect rules for access to your public IP addresses from within your internal networks. Note: Reflection only works on port forward type items and does not work for large ranges > 500 ports.</strong>
|
|
575
|
</td>
|
|
576
|
</tr>
|
|
577
|
<tr>
|
|
578
|
<td width="22%" valign="top"> </td>
|
|
579
|
<td width="78%"><input name="Submit" type="submit" class="formbtn" value="Save" onclick="enable_change(true)" /></td>
|
|
580
|
</tr>
|
|
581
|
<tr>
|
|
582
|
<td colspan="2" class="list" height="12"> </td>
|
|
583
|
</tr>
|
|
584
|
<tr>
|
|
585
|
<td colspan="2" valign="top" class="listtopic">Hardware Checksum Offloading</td>
|
|
586
|
</tr>
|
|
587
|
<tr>
|
|
588
|
<td width="22%" valign="top" class="vncell">Disable Hardware Checksum Offloading</td>
|
|
589
|
<td width="78%" class="vtable">
|
|
590
|
<input name="disablechecksumoffloading" type="checkbox" id="disablechecksumoffloading" value="yes" <?php if (isset($config['system']['disablechecksumoffloading'])) echo "checked"; ?> onclick="enable_change(false)" />
|
|
591
|
<strong>Checking this option will prevent hardware checksum offloading. FreeBSD sometimes has difficulties with certain drivers.</strong>
|
|
592
|
</td>
|
|
593
|
</tr>
|
|
594
|
<tr>
|
|
595
|
<td width="22%" valign="top"> </td>
|
|
596
|
<td width="78%"><input name="Submit" type="submit" class="formbtn" value="Save" onclick="enable_change(true)" /></td>
|
|
597
|
</tr>
|
|
598
|
<tr>
|
|
599
|
<td colspan="2" class="list" height="12"> </td>
|
|
600
|
</tr>
|
|
601
|
</tbody>
|
|
602
|
</table>
|
|
603
|
</form>
|
|
604
|
|
|
605
|
<script language="JavaScript" type="text/javascript">
|
|
606
|
<!--
|
|
607
|
enable_change(false);
|
|
608
|
//-->
|
|
609
|
</script>
|
|
610
|
|
|
611
|
<?php include("fend.inc"); ?>
|
|
612
|
|
|
613
|
</body>
|
|
614
|
</html>
|
|
615
|
|
|
616
|
<?php
|
|
617
|
|
|
618
|
if (($config['system']['webgui']['certificate'] != $oldcert)
|
|
619
|
|| ($config['system']['webgui']['private-key'] != $oldkey)) {
|
|
620
|
ob_flush();
|
|
621
|
flush();
|
|
622
|
log_error("webConfigurator certificates have changed. Restarting webConfigurator.");
|
|
623
|
sleep(1);
|
|
624
|
touch("/tmp/restart_webgui");
|
|
625
|
}
|
|
626
|
|
|
627
|
?>
|