pfSense

#!/usr/local/bin/php

<?php

/* $Id$ */

/*

	firewall_nat_edit.php

	part of m0n0wall (http://m0n0.ch/wall)

	Copyright (C) 2003-2004 Manuel Kasper <mk@neon1.net>.

	All rights reserved.

	Redistribution and use in source and binary forms, with or without

	modification, are permitted provided that the following conditions are met:

	1. Redistributions of source code must retain the above copyright notice,

	   this list of conditions and the following disclaimer.

	2. Redistributions in binary form must reproduce the above copyright

	   notice, this list of conditions and the following disclaimer in the

	   documentation and/or other materials provided with the distribution.

	THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,

	INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

	AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

	AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

	OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

	SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

	INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

	CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

	ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

	POSSIBILITY OF SUCH DAMAGE.

*/

require("guiconfig.inc");

if (!is_array($config['nat']['rule'])) {

	$config['nat']['rule'] = array();

}

//nat_rules_sort();

$a_nat = &$config['nat']['rule'];

$id = $_GET['id'];

if (isset($_POST['id']))

	$id = $_POST['id'];

if (isset($_GET['dup'])) {

        $id = $_GET['dup'];

        $after = $_GET['dup'];

}

if (isset($id) && $a_nat[$id]) {

	$pconfig['extaddr'] = $a_nat[$id]['external-address'];

	$pconfig['proto'] = $a_nat[$id]['protocol'];

	list($pconfig['beginport'],$pconfig['endport']) = explode("-", $a_nat[$id]['external-port']);

	$pconfig['localip'] = $a_nat[$id]['target'];

	$pconfig['localbeginport'] = $a_nat[$id]['local-port'];

	$pconfig['descr'] = $a_nat[$id]['descr'];

	$pconfig['interface'] = $a_nat[$id]['interface'];

	if (!$pconfig['interface'])

		$pconfig['interface'] = "wan";

} else {

	$pconfig['interface'] = "wan";

}

if (isset($_GET['dup']))

	unset($id);

if ($_POST) {

	if ($_POST['beginport_cust'] && !$_POST['beginport'])

		$_POST['beginport'] = $_POST['beginport_cust'];

	if ($_POST['endport_cust'] && !$_POST['endport'])

		$_POST['endport'] = $_POST['endport_cust'];

	if ($_POST['localbeginport_cust'] && !$_POST['localbeginport'])

		$_POST['localbeginport'] = $_POST['localbeginport_cust'];

	if (!$_POST['endport'])

		$_POST['endport'] = $_POST['beginport'];

	unset($input_errors);

	$pconfig = $_POST;

	/* input validation */

	$reqdfields = explode(" ", "interface proto beginport localip localbeginport");

	$reqdfieldsn = explode(",", "Interface,Protocol,Start port,NAT IP,Local port");

	do_input_validation($_POST, $reqdfields, $reqdfieldsn, &$input_errors);

	if (($_POST['beginport'] && !is_ipaddroralias($_POST['beginport']) && !is_port($_POST['beginport']))) {

		$input_errors[] = "The start port must be an integer between 1 and 65535.";

	}

	if (($_POST['endport'] && !is_ipaddroralias($_POST['endport']) && !is_port($_POST['endport']))) {

		$input_errors[] = "The end port must be an integer between 1 and 65535.";

	}

	if (($_POST['localbeginport'] && !is_ipaddroralias($_POST['localbeginport']) && !is_port($_POST['localbeginport']))) {

		$input_errors[] = "The local port must be an integer between 1 and 65535.";

	}

	if (($_POST['localip'] && !is_ipaddroralias($_POST['localip']))) {

		$input_errors[] = "\"{$_POST['localip']}\" is not valid NAT IP address or host alias.";

	}

	if ($_POST['beginport'] > $_POST['endport']) {

		/* swap */

		$tmp = $_POST['endport'];

		$_POST['endport'] = $_POST['beginport'];

		$_POST['beginport'] = $tmp;

	}

	if (!$input_errors) {

		if (($_POST['endport'] - $_POST['beginport'] + $_POST['localbeginport']) > 65535)

			$input_errors[] = "The target port range must be an integer between 1 and 65535.";

	}

	/* check for overlaps */

	foreach ($a_nat as $natent) {

		if (isset($id) && ($a_nat[$id]) && ($a_nat[$id] === $natent))

			continue;

		if ($natent['interface'] != $_POST['interface'])

			continue;

		if ($natent['external-address'] != $_POST['extaddr'])

			continue;

		list($begp,$endp) = explode("-", $natent['external-port']);

		if (!$endp)

			$endp = $begp;

		if (!(   (($_POST['beginport'] < $begp) && ($_POST['endport'] < $begp))

		      || (($_POST['beginport'] > $endp) && ($_POST['endport'] > $endp)))) {

			$input_errors[] = "The external port range overlaps with an existing entry.";

			break;

		}

	}

	if (!$input_errors) {

		$natent = array();

		if ($_POST['extaddr'])

			$natent['external-address'] = $_POST['extaddr'];

		$natent['protocol'] = $_POST['proto'];

		if ($_POST['beginport'] == $_POST['endport'])

			$natent['external-port'] = $_POST['beginport'];

		else

			$natent['external-port'] = $_POST['beginport'] . "-" . $_POST['endport'];

		$natent['target'] = $_POST['localip'];

		$natent['local-port'] = $_POST['localbeginport'];

		$natent['interface'] = $_POST['interface'];

		$natent['descr'] = $_POST['descr'];

		if (isset($id) && $a_nat[$id])

			$a_nat[$id] = $natent;

		else {

			if (is_numeric($after))

				array_splice($a_nat, $after+1, 0, array($natent));

			else

				$a_nat[] = $natent;

		}

		touch($d_natconfdirty_path);

		if ($_POST['autoadd']) {

			/* auto-generate a matching firewall rule */

			$filterent = array();

			$filterent['interface'] = $_POST['interface'];

			$filterent['protocol'] = $_POST['proto'];

			$filterent['source']['any'] = "";

			$filterent['destination']['address'] = $_POST['localip'];

			$dstpfrom = $_POST['localbeginport'];

			$dstpto = $dstpfrom + $_POST['endport'] - $_POST['beginport'];

			if ($dstpfrom == $dstpto)

				$filterent['destination']['port'] = $dstpfrom;

			else

				$filterent['destination']['port'] = $dstpfrom . "-" . $dstpto;

			$filterent['descr'] = "NAT " . $_POST['descr'];

			$config['filter']['rule'][] = $filterent;

			touch($d_filterconfdirty_path);

		}

		write_config();

		header("Location: firewall_nat.php");

		exit;

	}

}

$pgtitle = "Firewall: NAT: Port Forward: Edit";

include("head.inc");

?>

<body link="#0000CC" vlink="#0000CC" alink="#0000CC">

<?php

include("fbegin.inc"); ?>

<p class="pgtitle"><?=$pgtitle?></p>

<?php if ($input_errors) print_input_errors($input_errors); ?>

            <form action="firewall_nat_edit.php" method="post" name="iform" id="iform">

	      <?display_topbar("", "#eeeeee")?>

              <table width="100%" border="0" cellpadding="6" cellspacing="0">

	  	<tr>

                  <td width="22%" valign="top" class="vncellreq">Interface</td>

                  <td width="78%" class="vtable">

					<select name="interface" class="formfld">

						<?php

						$interfaces = array('wan' => 'WAN', 'lan' => 'LAN', 'pptp' => 'PPTP');

						for ($i = 1; isset($config['interfaces']['opt' . $i]); $i++) {

							$interfaces['opt' . $i] = $config['interfaces']['opt' . $i]['descr'];

						}

						foreach ($interfaces as $iface => $ifacename): ?>

						<option value="<?=$iface;?>" <?php if ($iface == $pconfig['interface']) echo "selected"; ?>>

						<?=htmlspecialchars($ifacename);?>

						</option>

						<?php endforeach; ?>

					</select><br>

                     <span class="vexpl">Choose which interface this rule applies to.<br>

                     Hint: in most cases, you'll want to use WAN here.</span></td>

                </tr>

			    <tr>

                  <td width="22%" valign="top" class="vncellreq">External address</td>

                  <td width="78%" class="vtable">

					<select name="extaddr" class="formfld">

						<option value="" <?php if (!$pconfig['extaddr']) echo "selected"; ?>>Interface address</option>

<?php					if (is_array($config['virtualip']['vip'])):

						foreach ($config['virtualip']['vip'] as $sn): ?>

						<option value="<?=$sn['subnet'];?>" <?php if ($sn['subnet'] == $pconfig['extaddr']) echo "selected"; ?>><?=htmlspecialchars("{$sn['subnet']} ({$sn['descr']})");?></option>

<?php					endforeach;

						endif; ?>

						<option value="any" <?php if($pconfig['extaddr'] == "any") echo "selected"; ?>>any</option>

					</select>

					<br />

                    <span class="vexpl">

					If you want this rule to apply to another IP address than the IP address of the interface chosen above,

					select it here (you need to define <a href="firewall_virtual_ip.php">Virtual IP</a> addresses on the first).  Also note that if you are trying to redirect connections on the LAN select the "any" option.</span></td>

                </tr>

                <tr>

                  <td width="22%" valign="top" class="vncellreq">Protocol</td>

                  <td width="78%" class="vtable">

                    <select name="proto" class="formfld">

                      <?php $protocols = explode(" ", "TCP UDP TCP/UDP GRE ESP"); foreach ($protocols as $proto): ?>

                      <option value="<?=strtolower($proto);?>" <?php if (strtolower($proto) == $pconfig['proto']) echo "selected"; ?>><?=htmlspecialchars($proto);?></option>

                      <?php endforeach; ?>

                    </select> <br> <span class="vexpl">Choose which IP protocol

                    this rule should match.<br>

                    Hint: in most cases, you should specify <em>TCP</em> &nbsp;here.</span></td>

                </tr>

                <tr>

                  <td width="22%" valign="top" class="vncellreq">External port

                    range </td>

                  <td width="78%" class="vtable">

                    <table border="0" cellspacing="0" cellpadding="0">

                      <tr>

                        <td>from:&nbsp;&nbsp;</td>

                        <td><select name="beginport" class="formfld" onChange="ext_rep_change();ext_change()">

                            <option value="">(other)</option>

                            <?php $bfound = 0; foreach ($wkports as $wkport => $wkportdesc): ?>

                            <option value="<?=$wkport;?>" <?php if ($wkport == $pconfig['beginport']) {

								echo "selected";

								$bfound = 1;

							}?>>

							<?=htmlspecialchars($wkportdesc);?>

							</option>

                            <?php endforeach; ?>

                          </select> <input autocomplete='off' class="formfldalias" name="beginport_cust" id="beginport_cust" type="text" size="5" value="<?php if (!$bfound) echo $pconfig['beginport']; ?>"></td>

                      </tr>

                      <tr>

                        <td>to:</td>

                        <td><select name="endport" class="formfld" onChange="ext_change()">

                            <option value="">(other)</option>

                            <?php $bfound = 0; foreach ($wkports as $wkport => $wkportdesc): ?>

                            <option value="<?=$wkport;?>" <?php if ($wkport == $pconfig['endport']) {

								echo "selected";

								$bfound = 1;

							}?>>

							<?=htmlspecialchars($wkportdesc);?>

							</option>

							<?php endforeach; ?>

                          </select> <input class="formfldalias"  autocomplete='off' name="endport_cust" id="endport_cust" type="text" size="5" value="<?php if (!$bfound) echo $pconfig['endport']; ?>"></td>

                      </tr>

                    </table>

                    <br> <span class="vexpl">Specify the port or port range on

                    the firewall's external address for this mapping.<br>

                    Hint: you can leave the <em>'to'</em> field empty if you only

                    want to map a single port</span></td>

                </tr>

                <tr>

                  <td width="22%" valign="top" class="vncellreq">NAT IP</td>

                  <td width="78%" class="vtable">

                    <input autocomplete='off' name="localip" type="text" class="formfldalias" id="localip" size="20" value="<?=htmlspecialchars($pconfig['localip']);?>">

                    <br> <span class="vexpl">Enter the internal IP address of

                    the server on which you want to map the ports.<br>

                    e.g. <em>192.168.1.12</em></span></td>

                </tr>

                <tr>

                  <td width="22%" valign="top" class="vncellreq">Local port</td>

                  <td width="78%" class="vtable">

                    <select name="localbeginport" class="formfld" onChange="ext_change()">

                      <option value="">(other)</option>

                      <?php $bfound = 0; foreach ($wkports as $wkport => $wkportdesc): ?>

                      <option value="<?=$wkport;?>" <?php if ($wkport == $pconfig['localbeginport']) {

							echo "selected";

							$bfound = 1;

						}?>>

					  <?=htmlspecialchars($wkportdesc);?>

					  </option>

                      <?php endforeach; ?>

                    </select> <input  autocomplete='off' class="formfldalias" name="localbeginport_cust" id="localbeginport_cust" type="text" size="5" value="<?php if (!$bfound) echo $pconfig['localbeginport']; ?>">

                    <br>

                    <span class="vexpl">Specify the port on the machine with the

                    IP address entered above. In case of a port range, specify

                    the beginning port of the range (the end port will be calculated

                    automatically).<br>

                    Hint: this is usually identical to the 'from' port above</span></td>

                </tr>

                <tr>

                  <td width="22%" valign="top" class="vncell">Description</td>

                  <td width="78%" class="vtable">

                    <input name="descr" type="text" class="formfld" id="descr" size="40" value="<?=htmlspecialchars($pconfig['descr']);?>">

                    <br> <span class="vexpl">You may enter a description here

                    for your reference (not parsed).</span></td>

                </tr><?php if ((!(isset($id) && $a_nat[$id])) || (isset($_GET['dup']))): ?>

                <tr>

                  <td width="22%" valign="top">&nbsp;</td>

                  <td width="78%">

                    <input name="autoadd" type="checkbox" id="autoadd" value="yes">

                    <strong>Auto-add a firewall rule to permit traffic through

                    this NAT rule</strong></td>

                </tr><?php endif; ?>

                <tr>

                  <td width="22%" valign="top">&nbsp;</td>

                  <td width="78%">

                    <input name="Submit" type="submit" class="formbtn" value="Save"> <input type="button" class="formbtn" value="Cancel" onclick="history.back()">

                    <?php if (isset($id) && $a_nat[$id]): ?>

                    <input name="id" type="hidden" value="<?=$id;?>">

                    <?php endif; ?>

                  </td>

                </tr>

              </table>

</form>

<script language="JavaScript">

<!--

	ext_change();

//-->

</script>

<?php

$isfirst = 0;

$aliases = "";

$addrisfirst = 0;

$aliasesaddr = "";

if($config['aliases']['alias'] <> "")

	foreach($config['aliases']['alias'] as $alias_name) {

		if(!stristr($alias_name['address'], ".")) {

			if($isfirst == 1) $aliases .= ",";

			$aliases .= "'" . $alias_name['name'] . "'";

			$isfirst = 1;

		} else {

			if($addrisfirst == 1) $aliasesaddr .= ",";

			$aliasesaddr .= "'" . $alias_name['name'] . "'";

			$addrisfirst = 1;

		}

	}

?>

<script language="JavaScript">

<!--

	var addressarray=new Array(<?php echo $aliasesaddr; ?>);

	var customarray=new Array(<?php echo $aliases; ?>);

//-->

</script>

<?php include("fend.inc"); ?>

</body>

</html>