Project

General

Profile

Download (12.4 KB) Statistics
| Branch: | Tag: | Revision:
1
#!/usr/local/bin/php -f
2
<?php
3
ini_set('apc.enabled', '0');
4

    
5
/* $Id$ */
6
/*
7
	rc.bootup
8
	part of pfSense by Scott Ullrich
9
	originally based on m0n0wall (http://m0n0.ch/wall)
10
	Copyright (C) 2004-2009 Scott Ullrich <sullrich@pfsense.org>.
11
	Copyright (C) 2003-2004 Manuel Kasper <mk@neon1.net>.
12
	Copyright (C) 2009 Erik Kristensen
13
	All rights reserved.
14

    
15
	Redistribution and use in source and binary forms, with or without
16
	modification, are permitted provided that the following conditions are met:
17

    
18
	1. Redistributions of source code must retain the above copyright notice,
19
	   this list of conditions and the following disclaimer.
20

    
21
	2. Redistributions in binary form must reproduce the above copyright
22
	   notice, this list of conditions and the following disclaimer in the
23
	   documentation and/or other materials provided with the distribution.
24

    
25
	THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
26
	INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
27
	AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
28
	AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
29
	OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30
	SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31
	INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32
	CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33
	ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34
	POSSIBILITY OF SUCH DAMAGE.
35
*/
36

    
37
function rescue_detect_keypress() {
38
	// How long do you want the script to wait before moving on (in seconds)
39
	$timeout=9;
40
	echo "\n";
41
    echo "[ Press R to enter recovery mode or ]\n";
42
	echo "[  press I to launch the installer  ]\n\n";
43
	echo "(R)ecovery mode can assist by rescuing config.xml\n";
44
	echo "from a broken hard disk installation, etc.\n\n";
45
	echo "(I)nstaller may be invoked now if you do \n";
46
	echo "not wish to boot into the liveCD environment at this time.\n\n";
47
	echo "(C) continues the LiveCD bootup without further pause.\n\n";
48
	echo "Timeout before auto boot continues (seconds): {$timeout}";
49
	$key = null;
50
	exec("/bin/stty erase " . chr(8));
51
	while(!in_array($key, array("c", "C", "r","R", "i", "I", "~", "!"))) {
52
	        echo chr(8) . "{$timeout}";
53
	        `/bin/stty -icanon min 0 time 25`;
54
	        $key = trim(`KEY=\`dd count=1 2>/dev/null\`; echo \$KEY`);
55
	        `/bin/stty icanon`;
56
	        // Decrement our timeout value
57
	        $timeout--;
58
	        // If we have reached 0 exit and continue on
59
	        if ($timeout == 0) 
60
				break;
61
	}
62
	// If R or I was pressed do our logic here
63
	if (in_array($key, array("r", "R"))) {
64
	  putenv("TERM=cons25");
65
	  echo "\n\nRecovery mode selected...\n";
66
	  passthru("/usr/bin/env TERM=cons25 /bin/tcsh -c /scripts/lua_installer_rescue");
67
	} elseif (in_array($key, array("i", "I"))) {
68
	  putenv("TERM=cons25");  
69
	  echo "\n\nInstaller mode selected...\n";
70
	  passthru("/usr/bin/env TERM=cons25 /bin/tcsh -c /scripts/lua_installer");
71
	  if(file_exists("/tmp/install_complete")) {
72
		passthru("/etc/rc.reboot");
73
		exit;
74
	  }
75
	} elseif (in_array($key, array("!", "~"))) {
76
 		putenv("TERM=cons25");
77
		echo "\n\nRecovery shell selected...\n";
78
		echo "\n";
79
		touch("/tmp/donotbootup");
80
		exit;
81
	} else {
82
		echo "\n\n";
83
	}
84
}
85

    
86
echo " done.\n";
87

    
88
echo "Initializing...";
89
echo ".";
90
require_once("/etc/inc/globals.inc");
91
echo ".";
92
require_once("/etc/inc/led.inc");
93
led_normalize();
94
echo ".";
95
if (led_count() >= 3) {
96
	led_kitt();
97
}
98

    
99
/* let the other functions know we're booting */
100
$pkg_interface = 'console';
101
$g['booting'] = true;
102

    
103
/* parse the configuration and include all functions used below */
104
require_once("/etc/inc/config.inc");
105
echo ".";
106
require_once("/etc/inc/config.console.inc");
107
echo ".";
108
require_once("/etc/inc/auth.inc");
109
echo ".";
110
require_once("/etc/inc/functions.inc");
111
echo ".";
112
require_once("/etc/inc/filter.inc");
113
echo ".";
114
require_once("/etc/inc/shaper.inc");
115
echo ".";
116
require_once("/etc/inc/ipsec.inc");
117
echo ".";
118
require_once("/etc/inc/vpn.inc");
119
echo ".";
120
require_once("/etc/inc/openvpn.inc");
121
echo ".";
122
require_once("/etc/inc/captiveportal.inc");
123
echo ".";
124
require_once("/etc/inc/rrd.inc");
125
echo ".";
126
require_once("/etc/inc/pfsense-utils.inc");
127
echo ".";
128

    
129
/* get system memory amount */
130
$memory = get_memory();
131
$avail = $memory[1];
132
echo " done.\n";
133

    
134
conf_mount_rw();
135

    
136
/* save dmesg output to file */
137
system_dmesg_save();
138

    
139
/* check whether config reset is desired (via hardware button on WRAP/ALIX) */
140
system_check_reset_button();
141

    
142
/* remove previous firmware upgrade if present */
143
if (file_exists("/root/firmware.tgz")) 
144
	unlink("/root/firmware.tgz");
145

    
146
/* start devd (dhclient now uses it) */
147
echo "Starting device manager (devd)...";
148
mute_kernel_msgs();
149
start_devd();
150
set_device_perms();
151
unmute_kernel_msgs();
152
echo "done.\n";
153

    
154
// Display rescue configuration option
155
if($g['platform'] == "cdrom") 
156
		rescue_detect_keypress();
157

    
158
echo "Loading configuration...";
159
parse_config_bootup();
160
echo "done.\n";
161

    
162
if($g['platform'] == "jail") {
163
	/* We must determine what network settings have been configured for us */
164
	$wanif = "lo0";	/* defaults, if the jail admin hasn't set us up */
165
	$ipaddr = "127.0.0.1";
166
	$iflist = get_interface_list();
167
	foreach ($iflist as $iface => $ifa) {
168
		if (isset($ifa['ipaddr'])) {
169
			$wanif = $iface;
170
			$ipaddr = $ifa['ipaddr'];
171
			break;
172
		}
173
	}
174
	$config['interfaces'] = array();
175
	$config['interfaces']['lan'] = array();
176
	$config['interfaces']['lan']['enable'] = false;
177
	$config['interfaces']['wan'] = array();
178
	/* XXX, todo */
179
	$config['interfaces']['wan']['if'] = $wanif;
180
	$config['interfaces']['wan']['ipaddr'] = $ipaddr;
181
	$config['interfaces']['wan']['subnet'] = "32";	/* XXX right? */
182
	$config['interfaces']['wan']['enable'] = true;
183
	if($config['dhcpd']['lan']) 
184
		unset($config['dhcpd']['lan']['enable']);
185
	unlink_if_exists('/conf/trigger_initial_wizard');
186
	write_config();
187
} else {
188
	/*
189
	 *  Determine if we need to throw a interface exception
190
	 *  and ask the user to reassign interfaces.  This will
191
	 *  avoid a reboot and thats a good thing.
192
	 */
193
	while(is_interface_mismatch() == true) {
194
		led_assigninterfaces();
195
		if (isset($config['revision'])) {
196
			if (file_exists("{$g['tmp_path']}/missing_interfaces"))
197
				echo "Warning: Configuration references interfaces that do not exist: " . file_get_contents("{$g['tmp_path']}/missing_interfaces") . "\n";
198
			echo "\nNetwork interface mismatch -- Running interface assignment option.\n";
199
		} else
200
			echo "\nDefault interfaces not found -- Running interface assignment option.\n";
201
		$ifaces = get_interface_list();
202
		if (is_array($ifaces)) {
203
			foreach($ifaces as $iface => $ifdata)
204
				interfaces_bring_up($iface);
205
		}
206
		set_networking_interfaces_ports();
207
		led_kitt();
208
	}
209
}
210

    
211
/* convert config and clean backups */
212
echo "Updating configuration...";
213
convert_config();
214
echo "done.\n";
215

    
216
echo "Cleaning backup cache...";
217
cleanup_backupcache(true);
218
echo "done.\n";
219

    
220
/* read in /etc/sysctl.conf and set values if needed */
221
echo "Setting up extended sysctls...";
222
system_setup_sysctl();
223
echo "done.\n";
224

    
225
/* enable optional crypto modules */
226
load_crypto();
227

    
228
/* enable optional thermal sensor modules */
229
load_thermal_hardware();
230

    
231
/* run any early shell commands specified in config.xml */
232
system_do_shell_commands(1);
233

    
234
/* set up our timezone */
235
system_timezone_configure();
236

    
237
/* set up our hostname */
238
system_hostname_configure();
239

    
240
/* make hosts file */
241
system_hosts_generate();
242

    
243
/* configure loopback interface */
244
interfaces_loopback_configure();
245

    
246
/* start syslogd */
247
system_syslogd_start();
248

    
249
echo "Starting Secure Shell Services...";
250
mwexec_bg("/etc/sshd");
251
echo "done.\n";
252

    
253
/* setup polling */
254
echo "Setting up polling defaults...";
255
setup_polling();
256
echo "done.\n";
257

    
258
/* setup interface microcode which improves tcp/ip speed */
259
echo "Setting up interfaces microcode...";
260
setup_microcode();
261
echo "done.\n";
262

    
263
/* set up interfaces */
264
if(!$debugging)
265
	mute_kernel_msgs();
266
interfaces_configure();
267
if(!$debugging)
268
	unmute_kernel_msgs();
269

    
270
/* re-make hosts file after configuring interfaces */
271
system_hosts_generate();
272

    
273
/* start OpenVPN server & clients */
274
echo "Syncing OpenVPN settings...";
275
openvpn_resync_all();
276
echo "done.\n";
277

    
278
/* generate resolv.conf */
279
system_resolvconf_generate();
280

    
281
/* setup altq + pf */
282
filter_configure_sync();
283

    
284
/* start pflog */
285
echo "Starting PFLOG...";
286
filter_pflog_start();
287
echo "done.\n";
288

    
289
/* reconfigure our gateway monitor */
290
echo "Setting up gateway monitors...";
291
setup_gateways_monitor();
292
echo "done.\n";
293

    
294
echo "Synchronizing user settings...";
295
local_sync_accounts();
296
echo "done.\n";
297

    
298
if($avail > 0 and $avail < 65) {
299
	echo "System has less than 65 megabytes of ram {$avail}.  Delaying webConfigurator startup.\n";
300
	/* start webConfigurator up on final pass */
301
	mwexec("/usr/local/sbin/pfSctl -c 'service restart webgui'");
302
} else {
303
	/* start web server */
304
	system_webgui_start();
305
}
306

    
307
/* configure cron service */
308
echo "Configuring CRON...";
309
configure_cron();
310
echo "done.\n";
311

    
312
/* set up static routes */
313
system_routing_configure();
314

    
315
/* enable routing */
316
system_routing_enable();
317

    
318
/* start dnsmasq service */
319
services_dnsmasq_configure();
320

    
321
/* Do an initial time sync */
322
echo "Starting NTP time client...";
323
/* At bootup this will just write the config, ntpd will launch from ntpdate_sync_once.sh */
324
system_ntp_configure(false);
325
mwexec_bg("/usr/local/sbin/ntpdate_sync_once.sh", true);
326
echo "done.\n";
327

    
328
/* start load balancer daemon */
329
relayd_configure();
330

    
331
/* configure console menu */
332
system_console_configure();
333

    
334
/* start DHCP service */
335
services_dhcpd_configure();
336

    
337
/* start dhcpleases dhpcp hosts leases program */
338
system_dhcpleases_configure();
339

    
340
/* start DHCP relay */
341
services_dhcrelay_configure();
342

    
343
/* dyndns service updates */
344
send_event("service reload dyndnsall");
345

    
346
/* Run a filter configure now that most all services have started */
347
filter_configure_sync();
348

    
349
/* setup pppoe and pptp */
350
vpn_setup();
351

    
352
/* start the captive portal */
353
captiveportal_configure();
354

    
355
/* start Voucher support */
356
voucher_configure();
357

    
358
/* run any shell commands specified in config.xml */
359
system_do_shell_commands();
360

    
361
/* start IPsec tunnels */
362
$ipsec_dynamic_hosts = vpn_ipsec_configure();
363

    
364
/* start SNMP service */
365
services_snmpd_configure();
366

    
367
/* power down hard drive if needed/set */
368
system_set_harddisk_standby();
369

    
370
/* lock down console if necessary */
371
auto_login();
372

    
373
/* load graphing functions */
374
enable_rrd_graphing();
375

    
376
/* enable watchdog if supported */
377
enable_watchdog();
378

    
379
/* if <system><afterbootupshellcmd> exists, execute the command */
380
if($config['system']['afterbootupshellcmd'] <> "") {
381
	echo "Running afterbootupshellcmd {$config['system']['afterbootupshellcmd']}\n";
382
	mwexec($config['system']['afterbootupshellcmd']);
383
}
384

    
385
if($avail < $g['minimum_ram_warning']) {
386
	require_once("/etc/inc/notices.inc");
387
	file_notice("{$g['product_name']}MemoryRequirements", "{$g['product_name']} requires at least {$g['minimum_ram_warning_text']} of RAM.  Expect unusual performance.  This platform is not supported.", "Memory", "", 1);
388
	mwexec("/sbin/sysctl net.inet.tcp.recvspace=4096");
389
	mwexec("/sbin/sysctl net.inet.tcp.sendspace=4096");
390
}
391

    
392
/* if we are operating at 1000 then increase timeouts.
393
   this was never accounted for after moving to 1000 hz */
394
$kern_hz = `/sbin/sysctl kern.clockrate | /usr/bin/awk '{ print $5 }' | /usr/bin/cut -d"," -f1`;
395
$kern_hz = trim($kern_hz, "\r\n");
396
if($kern_hz == "1000") 
397
	mwexec("/sbin/sysctl net.inet.tcp.rexmit_min=30");
398

    
399
/* start the igmpproxy daemon */
400
services_igmpproxy_configure();
401

    
402
/* start the upnp daemon if it is enabled */
403
upnp_start();
404

    
405
/* If powerd is enabled, lets launch it */
406
activate_powerd();
407

    
408
/* Remove the old shutdown binary if we kept it. */
409
if (file_exists("/sbin/shutdown.old"))
410
	@unlink("/sbin/shutdown.old");
411

    
412
/* Resync / Reinstall packages if need be */
413
if(file_exists('/conf/needs_package_sync')) {
414
	if($config['installedpackages'] <> '' && is_array($config['installedpackages']['package'])) {
415
		require_once("pkg-utils.inc");
416
		if($g['platform'] == "pfSense" || $g['platform'] == "nanobsd") {
417
			mark_subsystem_dirty('packagelock');
418
			pkg_reinstall_all();
419
			clear_subsystem_dirty('packagelock');
420
		}
421
	}
422
	@unlink('/conf/needs_package_sync');
423
}
424

    
425
/* Give syslogd a kick after everything else has been initialized, otherwise it can occasionally
426
   fail to route syslog messages properly on both IPv4 and IPv6 */
427
system_syslogd_start();
428

    
429
/* done */
430
unset($g['booting']);
431

    
432
/* If there are ipsec dynamic hosts try again to reload the tunnels as rc.newipsecdns does */
433
if ($ipsec_dynamic_hosts) {
434
	vpn_ipsec_refresh_policies();
435
	vpn_ipsec_configure();
436
}
437

    
438
led_normalize();
439

    
440
conf_mount_ro();
441

    
442
?>
(38-38/109)