pfSense

#!/bin/sh

#

# builder_defaults.sh

#

# part of pfSense (https://www.pfsense.org)

# Copyright (c) 2004-2016 Rubicon Communications, LLC (Netgate)

# All rights reserved.

#

# Redistribution and use in source and binary forms, with or without

# modification, are permitted provided that the following conditions are met:

#

# 1. Redistributions of source code must retain the above copyright notice,

#    this list of conditions and the following disclaimer.

#

# 2. Redistributions in binary form must reproduce the above copyright

#    notice, this list of conditions and the following disclaimer in

#    the documentation and/or other materials provided with the

#    distribution.

#

# 3. All advertising materials mentioning features or use of this software

#    must display the following acknowledgment:

#    "This product includes software developed by the pfSense Project

#    for use in the pfSense® software distribution. (http://www.pfsense.org/).

#

# 4. The names "pfSense" and "pfSense Project" must not be used to

#    endorse or promote products derived from this software without

#    prior written permission. For written permission, please contact

#    coreteam@pfsense.org.

#

# 5. Products derived from this software may not be called "pfSense"

#    nor may "pfSense" appear in their names without prior written

#    permission of the Electric Sheep Fencing, LLC.

#

# 6. Redistributions of any form whatsoever must retain the following

#    acknowledgment:

#

# "This product includes software developed by the pfSense Project

# for use in the pfSense software distribution (http://www.pfsense.org/).

#

# THIS SOFTWARE IS PROVIDED BY THE pfSense PROJECT ``AS IS'' AND ANY

# EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE pfSense PROJECT OR

# ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED

# OF THE POSSIBILITY OF SUCH DAMAGE.

###########################################

# Product builder configuration file      #

# Please don't modify this file, you      #

# can put your settings and options       #

# in build.conf, which is sourced at the  #

# beginning of this file                  #

###########################################

if [ -z "${BUILDER_ROOT}" ]; then

	echo ">>> ERROR: BUILDER_ROOT must be defined by script that includes builder_defaults.sh"

	exit 1

fi

if [ ! -d "${BUILDER_ROOT}" ]; then

	echo ">>> ERROR: BUILDER_ROOT is invalid"

	exit 1

fi

export BUILDER_TOOLS=${BUILDER_TOOLS:-"${BUILDER_ROOT}/tools"}

if [ ! -d "${BUILDER_TOOLS}" ]; then

	echo ">>> ERROR: BUILDER_TOOLS is invalid"

	exit 1

fi

BUILD_CONF="${BUILDER_ROOT}/build.conf"

# Ensure file exists

if [ -f ${BUILD_CONF} ]; then

	. ${BUILD_CONF}

fi

# Make sure pkg will not be interactive

export ASSUME_ALWAYS_YES=true

# Architecture, supported ARCH values are:

#  Tier 1: i386, AMD64, and PC98

#  Tier 2: ARM, PowerPC, ia64, Sparc64 and sun4v

#  Tier 3: MIPS and S/390

#  Tier 4: None at the moment

#  Source: http://www.freebsd.org/doc/en/articles/committers-guide/archs.html

export TARGET=${TARGET:-"`uname -m`"}

export TARGET_ARCH=${TARGET_ARCH:-${TARGET}}

# Set TARGET_ARCH_CONF_DIR

if [ "$TARGET_ARCH" = "" ]; then

        export TARGET_ARCH=`uname -p`

fi

# Directory to be used for writing temporary information

export SCRATCHDIR=${SCRATCHDIR:-"${BUILDER_ROOT}/tmp"}

if [ ! -d ${SCRATCHDIR} ]; then

	mkdir -p ${SCRATCHDIR}

fi

# Product details

export PRODUCT_NAME=${PRODUCT_NAME:-"nonSense"}

export PRODUCT_NAME_SUFFIX=${PRODUCT_NAME_SUFFIX:-"-CE"}

export PRODUCT_URL=${PRODUCT_URL:-""}

export PRODUCT_SRC=${PRODUCT_SRC:-"${BUILDER_ROOT}/src"}

export PRODUCT_EMAIL=${PRODUCT_EMAIL:-"coreteam@pfsense.org"}

export XML_ROOTOBJ=${XML_ROOTOBJ:-$(echo "${PRODUCT_NAME}" | tr '[[:upper:]]' '[[:lower:]]')}

if [ "${PRODUCT_NAME}" = "pfSense" -a "${BUILD_AUTHORIZED_BY_NETGATE}" != "yes" ]; then

	echo ">>>ERROR: According the following license, only Netgate can build genuine pfSense® software"

	echo ""

	cat ${BUILDER_ROOT}/license.txt

	exit 1

fi

if [ -z "${PRODUCT_VERSION}" ]; then

	if [ ! -f ${PRODUCT_SRC}/etc/version ]; then

		echo ">>> ERROR: PRODUCT_VERSION is not defined and ${PRODUCT_SRC}/etc/version was not found"

		print_error_pfS

	fi

	export PRODUCT_VERSION=$(head -n 1 ${PRODUCT_SRC}/etc/version)

fi

export PRODUCT_REVISION=${PRODUCT_REVISION:-""}

# Product repository tag to build

_cur_git_repo_branch_or_tag=$(git -C ${BUILDER_ROOT} rev-parse --abbrev-ref HEAD)

if [ "${_cur_git_repo_branch_or_tag}" = "HEAD" ]; then

	# We are on a tag, lets find out its name

	export GIT_REPO_BRANCH_OR_TAG=$(git -C ${BUILDER_ROOT} describe --tags)

else

	export GIT_REPO_BRANCH_OR_TAG="${_cur_git_repo_branch_or_tag}"

fi

# Use vX_Y instead of RELENG_X_Y for poudriere to make it shorter

# Replace . by _ to make tag names look correct

POUDRIERE_BRANCH=$(echo "${GIT_REPO_BRANCH_OR_TAG}" | sed 's,RELENG_,v,; s,\.,_,g')

GIT_REPO_BASE=$(git -C ${BUILDER_ROOT} config --get remote.origin.url | sed -e 's,/[^/]*$,,')

# This is used for using svn for retrieving src

export FREEBSD_REPO_BASE=${FREEBSD_REPO_BASE:-"${GIT_REPO_BASE}/freebsd-src.git"}

export FREEBSD_BRANCH=${FREEBSD_BRANCH:-"RELENG_2_3_4"}

export FREEBSD_PARENT_BRANCH=${FREEBSD_PARENT_BRANCH:-"releng/10.3"}

export FREEBSD_SRC_DIR=${FREEBSD_SRC_DIR:-"${SCRATCHDIR}/FreeBSD-src"}

if [ "${TARGET}" = "i386" ]; then

	export BUILD_KERNELS=${BUILD_KERNELS:-"${PRODUCT_NAME} ${PRODUCT_NAME}_wrap ${PRODUCT_NAME}_wrap_vga"}

else

	export BUILD_KERNELS=${BUILD_KERNELS:-"${PRODUCT_NAME}"}

fi

# Leave this alone.

export SRC_CONF=${SRC_CONF:-"${FREEBSD_SRC_DIR}/release/conf/${PRODUCT_NAME}_src.conf"}

export MAKE_CONF=${MAKE_CONF:-"${FREEBSD_SRC_DIR}/release/conf/${PRODUCT_NAME}_make.conf"}

# Extra tools to be added to ITOOLS

export EXTRA_TOOLS=${EXTRA_TOOLS:-"uuencode uudecode ex"}

# Path to kernel files being built

export KERNEL_BUILD_PATH=${KERNEL_BUILD_PATH:-"${SCRATCHDIR}/kernels"}

# Do not touch builder /usr/obj

export MAKEOBJDIRPREFIX=${MAKEOBJDIRPREFIX:-"${SCRATCHDIR}/obj"}

# Controls how many concurrent make processes are run for each stage

_CPUS=""

if [ -z "${NO_MAKEJ}" ]; then

	_CPUS=$(expr $(sysctl -n kern.smp.cpus) '*' 2)

	if [ -n "${_CPUS}" ]; then

		_CPUS="-j${_CPUS}"

	fi

fi

export MAKEJ_WORLD=${MAKEJ_WORLD:-"${_CPUS}"}

export MAKEJ_KERNEL=${MAKEJ_KERNEL:-"${_CPUS}"}

if [ "${TARGET}" = "i386" ]; then

	export MODULES_OVERRIDE=${MODULES_OVERRIDE:-"i2c ipmi ndis ipfw ipdivert dummynet fdescfs opensolaris zfs glxsb if_stf coretemp amdtemp hwpmc"}

else

	export MODULES_OVERRIDE=${MODULES_OVERRIDE:-"i2c ipmi ndis ipfw ipdivert dummynet fdescfs opensolaris zfs glxsb if_stf coretemp amdtemp aesni sfxge hwpmc vmm nmdm ixgbe"}

fi

# gnid

export GNID_REPO_BASE=${GNID_REPO_BASE:-"${GIT_REPO_BASE}/gnid.git"}

export GNID_SRC_DIR=${GNID_SRC_DIR:-"${SCRATCHDIR}/gnid"}

export GNID_BRANCH=${GNID_BRANCH:-"master"}

export GNID_INCLUDE_DIR=${GNID_INCLUDE_DIR:-"${MAKEOBJDIRPREFIX}/${FREEBSD_SRC_DIR}/tmp/usr/include"}

export GNID_LIBCRYPTO_DIR=${GNID_LIBCRYPTO_DIR:-"${MAKEOBJDIRPREFIX}/${FREEBSD_SRC_DIR}/secure/lib/libcrypto"}

# Area that the final image will appear in

export IMAGES_FINAL_DIR=${IMAGES_FINAL_DIR:-"${SCRATCHDIR}/${PRODUCT_NAME}/"}

export BUILDER_LOGS=${BUILDER_LOGS:-"${BUILDER_ROOT}/logs"}

if [ ! -d ${BUILDER_LOGS} ]; then

	mkdir -p ${BUILDER_LOGS}

fi

# This is where files will be staged

export STAGE_CHROOT_DIR=${STAGE_CHROOT_DIR:-"${SCRATCHDIR}/stage-dir"}

# Directory that will clone to in order to create

# iso staging area.

export FINAL_CHROOT_DIR=${FINAL_CHROOT_DIR:-"${SCRATCHDIR}/final-dir"}

# 400M is not enough for amd64

export MEMORYDISK_SIZE=${MEMORYDISK_SIZE:-"1024M"}

# OVF/vmdk parms

# Name of ovf file included inside OVA archive

export OVFTEMPLATE=${OVFTEMPLATE:-"${BUILDER_TOOLS}/templates/ovf/${PRODUCT_NAME}.ovf"}

# / partition to be used by mkimg

export OVFUFS=${OVFUFS:-"${PRODUCT_NAME}${PRODUCT_NAME_SUFFIX}-disk1.ufs"}

# Raw disk to be converted to vmdk

export OVFRAW=${OVFRAW:-"${PRODUCT_NAME}${PRODUCT_NAME_SUFFIX}-disk1.raw"}

# On disk name of VMDK file included in OVA

export OVFVMDK=${OVFVMDK:-"${PRODUCT_NAME}${PRODUCT_NAME_SUFFIX}-disk1.vmdk"}

# 8 gigabyte on disk VMDK size

export VMDK_DISK_CAPACITY_IN_GB=${VMDK_DISK_CAPACITY_IN_GB:-"8"}

# swap partition size (freebsd-swap)

export OVA_SWAP_PART_SIZE_IN_GB=${OVA_SWAP_PART_SIZE_IN_GB:-"0"}

# Temporary place to save files

export OVA_TMP=${OVA_TMP:-"${SCRATCHDIR}/ova_tmp"}

# end of OVF

# Number of code images on media (1 or 2)

export NANO_IMAGES=2

# 0 -> Leave second image all zeroes so it compresses better.

# 1 -> Initialize second image with a copy of the first

export NANO_INIT_IMG2=1

export NANO_NEWFS="-b 4096 -f 512 -i 8192 -O1"

export FLASH_SIZE=${FLASH_SIZE:-"2g"}

# Size of code file system in 512 bytes sectors

# If zero, size will be as large as possible.

export NANO_CODESIZE=0

# Size of data file system in 512 bytes sectors

# If zero: no partition configured.

# If negative: max size possible

export NANO_DATASIZE=0

# Size of Product /conf partition  # 102400 = 50 megabytes.

export NANO_CONFSIZE=102400

# packet is OK for 90% of embedded

export NANO_BOOT0CFG="-o packet -s 1 -m 3"

# NOTE: Date string is used for creating file names of images

#       The file is used for sharing the same value with build_snapshots.sh

export DATESTRINGFILE=${DATESTRINGFILE:-"$SCRATCHDIR/version.snapshots"}

if [ -z "${DATESTRING}" ]; then

	if [ -f "${DATESTRINGFILE}" -a -n "${_USE_OLD_DATESTRING}" ]; then

		export DATESTRING=$(cat $DATESTRINGFILE)

	else

		export DATESTRING=$(date "+%Y%m%d-%H%M")

	fi

fi

echo "$DATESTRING" > $DATESTRINGFILE

# NOTE: Date string is placed on the final image etc folder to help detect new updates

#       The file is used for sharing the same value with build_snapshots.sh

export BUILTDATESTRINGFILE=${BUILTDATESTRINGFILE:-"$SCRATCHDIR/version.buildtime"}

if [ -z "${BUILTDATESTRING}" ]; then

	if [ -f "${BUILTDATESTRINGFILE}" -a -n "${_USE_OLD_DATESTRING}" ]; then

		export BUILTDATESTRING=$(cat $BUILTDATESTRINGFILE)

	else

		export BUILTDATESTRING=$(date "+%a %b %d %T %Z %Y")

	fi

fi

echo "$BUILTDATESTRING" > $BUILTDATESTRINGFILE

STAGING_HOSTNAME=${STAGING_HOSTNAME:-"release-staging.netgate.com"}

# Poudriere

export ZFS_TANK=${ZFS_TANK:-"zroot"}

export ZFS_ROOT=${ZFS_ROOT:-"/poudriere"}

export POUDRIERE_PORTS_NAME=${POUDRIERE_PORTS_NAME:-"${PRODUCT_NAME}_${POUDRIERE_BRANCH}"}

export POUDRIERE_BULK=${POUDRIERE_BULK:-"${BUILDER_TOOLS}/conf/pfPorts/poudriere_bulk"}

export POUDRIERE_PORTS_GIT_URL=${POUDRIERE_PORTS_GIT_URL:-"${GIT_REPO_BASE}/freebsd-ports.git"}

export POUDRIERE_PORTS_GIT_BRANCH=${POUDRIERE_PORTS_GIT_BRANCH:-"RELENG_2_3_4"}

unset _IS_RELEASE

unset _IS_RC

unset CORE_PKG_DATESTRING

export TIMESTAMP_SUFFIX="-${DATESTRING}"

# pkg doesn't like - as version separator, use . instead

export PKG_DATESTRING=$(echo "${DATESTRING}" | sed 's,-,.,g')

case "${PRODUCT_VERSION##*-}" in

	RELEASE)

		export _IS_RELEASE=yes

		unset TIMESTAMP_SUFFIX

		;;

	ALPHA|DEVELOPMENT)

		export CORE_PKG_DATESTRING=".a.${PKG_DATESTRING}"

		;;

	BETA*)

		export CORE_PKG_DATESTRING=".b.${PKG_DATESTRING}"

		;;

	RC*)

		export _IS_RC=yes

		export CORE_PKG_DATESTRING=".r.${PKG_DATESTRING}"

		;;

	*)

		echo ">>> ERROR: Invalid PRODUCT_VERSION format ${PRODUCT_VERSION}"

		exit 1

esac

# Host to rsync pkg repos from poudriere

export PKG_RSYNC_HOSTNAME=${PKG_RSYNC_HOSTNAME:-${STAGING_HOSTNAME}}

export PKG_RSYNC_USERNAME=${PKG_RSYNC_USERNAME:-"wwwsync"}

export PKG_RSYNC_SSH_PORT=${PKG_RSYNC_SSH_PORT:-"22"}

export PKG_RSYNC_DESTDIR=${PKG_RSYNC_DESTDIR:-"/staging/ce/packages"}

export PKG_RSYNC_LOGS=${PKG_RSYNC_LOGS:-"/staging/ce/packages/logs/${POUDRIERE_BRANCH}/${TARGET}"}

# Final packages server

if [ -n "${_IS_RELEASE}" ]; then

	export PKG_FINAL_RSYNC_HOSTNAME=${PKG_FINAL_RSYNC_HOSTNAME:-"nfs1.nyi.netgate.com"}

	export PKG_FINAL_RSYNC_DESTDIR=${PKG_FINAL_RSYNC_DESTDIR:-"/storage/files/pkg"}

else

	export PKG_FINAL_RSYNC_HOSTNAME=${PKG_FINAL_RSYNC_HOSTNAME:-"beta.pfsense.org"}

	export PKG_FINAL_RSYNC_DESTDIR=${PKG_FINAL_RSYNC_DESTDIR:-"/usr/local/www/beta/packages"}

fi

export PKG_FINAL_RSYNC_USERNAME=${PKG_FINAL_RSYNC_USERNAME:-"wwwsync"}

export PKG_FINAL_RSYNC_SSH_PORT=${PKG_FINAL_RSYNC_SSH_PORT:-"22"}

export SKIP_FINAL_RSYNC=${SKIP_FINAL_RSYNC:-}

# pkg repo variables

export USE_PKG_REPO_STAGING="1"

export PKG_REPO_SERVER_DEVEL=${PKG_REPO_SERVER_DEVEL:-"pkg+https://beta.pfsense.org/packages"}

export PKG_REPO_SERVER_RELEASE=${PKG_REPO_SERVER_RELEASE:-"pkg+https://pkg.pfsense.org"}

export PKG_REPO_SERVER_STAGING=${PKG_REPO_SERVER_STAGING:-"pkg+http://${STAGING_HOSTNAME}/ce/packages"}

if [ -n "${_IS_RELEASE}" -o -n "${_IS_RC}" ]; then

	export PKG_REPO_BRANCH_RELEASE=${PKG_REPO_BRANCH_RELEASE:-${POUDRIERE_BRANCH}}

	export PKG_REPO_BRANCH_DEVEL=${PKG_REPO_BRANCH_DEVEL:-"v2_3"}

	export PKG_REPO_BRANCH_STAGING=${PKG_REPO_BRANCH_STAGING:-${PKG_REPO_BRANCH_RELEASE}}

else

	export PKG_REPO_BRANCH_RELEASE=${PKG_REPO_BRANCH_RELEASE:-"v2_3_4"}

	export PKG_REPO_BRANCH_DEVEL=${PKG_REPO_BRANCH_DEVEL:-${POUDRIERE_BRANCH}}

	export PKG_REPO_BRANCH_STAGING=${PKG_REPO_BRANCH_STAGING:-${PKG_REPO_BRANCH_DEVEL}}

fi

if [ -n "${_IS_RELEASE}" ]; then

	export PKG_REPO_SIGN_KEY=${PKG_REPO_SIGN_KEY:-"release${PRODUCT_NAME_SUFFIX}"}

else

	export PKG_REPO_SIGN_KEY=${PKG_REPO_SIGN_KEY:-"beta${PRODUCT_NAME_SUFFIX}"}

fi

# Command used to sign pkg repo

export PKG_REPO_SIGNING_COMMAND=${PKG_REPO_SIGNING_COMMAND:-"ssh sign@codesigner.netgate.com sudo ./sign.sh ${PKG_REPO_SIGN_KEY}"}

export DO_NOT_SIGN_PKG_REPO=${DO_NOT_SIGN_PKG_REPO:-}

# Define base package version, based on date for snaps

export CORE_PKG_VERSION="${PRODUCT_VERSION%%-*}${CORE_PKG_DATESTRING}${PRODUCT_REVISION:+_}${PRODUCT_REVISION}"

export CORE_PKG_PATH=${CORE_PKG_PATH:-"${SCRATCHDIR}/${PRODUCT_NAME}_${POUDRIERE_BRANCH}_${TARGET_ARCH}-core"}

export CORE_PKG_REAL_PATH="${CORE_PKG_PATH}/.real_${DATESTRING}"

export CORE_PKG_ALL_PATH="${CORE_PKG_PATH}/All"

export CORE_PKG_TMP=${CORE_PKG_TMP:-"${SCRATCHDIR}/core_pkg_tmp"}

export PKG_REPO_BASE=${PKG_REPO_BASE:-"${BUILDER_TOOLS}/templates/pkg_repos"}

export PKG_REPO_DEFAULT=${PKG_REPO_DEFAULT:-"${PKG_REPO_BASE}/${PRODUCT_NAME}-repo.conf"}

export PKG_REPO_PATH=${PKG_REPO_PATH:-"/usr/local/etc/pkg/repos/${PRODUCT_NAME}.conf"}

export PRODUCT_SHARE_DIR=${PRODUCT_SHARE_DIR:-"/usr/local/share/${PRODUCT_NAME}"}

# Package overlay. This gives people a chance to build product

# installable image that already contains certain extra packages.

#

# Needs to contain comma separated package names. Of course

# package names must be valid. Using non existent

# package name would yield an error.

#

#export custom_package_list=""

# General builder output filenames

export UPDATESDIR=${UPDATESDIR:-"${IMAGES_FINAL_DIR}/updates"}

export ISOPATH=${ISOPATH:-"${IMAGES_FINAL_DIR}/${PRODUCT_NAME}${PRODUCT_NAME_SUFFIX}-${PRODUCT_VERSION}${PRODUCT_REVISION:+-p}${PRODUCT_REVISION}-${TARGET}${TIMESTAMP_SUFFIX}.iso"}

export MEMSTICKPATH=${MEMSTICKPATH:-"${IMAGES_FINAL_DIR}/${PRODUCT_NAME}${PRODUCT_NAME_SUFFIX}-memstick-${PRODUCT_VERSION}${PRODUCT_REVISION:+-p}${PRODUCT_REVISION}-${TARGET}${TIMESTAMP_SUFFIX}.img"}

export MEMSTICKSERIALPATH=${MEMSTICKSERIALPATH:-"${IMAGES_FINAL_DIR}/${PRODUCT_NAME}${PRODUCT_NAME_SUFFIX}-memstick-serial-${PRODUCT_VERSION}${PRODUCT_REVISION:+-p}${PRODUCT_REVISION}-${TARGET}${TIMESTAMP_SUFFIX}.img"}

export MEMSTICKADIPATH=${MEMSTICKADIPATH:-"${IMAGES_FINAL_DIR}/${PRODUCT_NAME}${PRODUCT_NAME_SUFFIX}-memstick-ADI-${PRODUCT_VERSION}${PRODUCT_REVISION:+-p}${PRODUCT_REVISION}-${TARGET}${TIMESTAMP_SUFFIX}.img"}

export OVAPATH=${OVAPATH:-"${IMAGES_FINAL_DIR}/${PRODUCT_NAME}${PRODUCT_NAME_SUFFIX}-${PRODUCT_VERSION}${PRODUCT_REVISION:+-p}${PRODUCT_REVISION}-${TARGET}${TIMESTAMP_SUFFIX}.ova"}

export MEMSTICK_VARIANTS=${MEMSTICK_VARIANTS:-}

export VARIANTIMAGES=""

export VARIANTUPDATES=""

# set full-update update filename

export UPDATES_TARBALL_FILENAME=${UPDATES_TARBALL_FILENAME:-"${UPDATESDIR}/${PRODUCT_NAME}${PRODUCT_NAME_SUFFIX}-Full-Update-${PRODUCT_VERSION}${PRODUCT_REVISION:+-p}${PRODUCT_REVISION}-${TARGET}${TIMESTAMP_SUFFIX}.tgz"}

# nanobsd templates

export NANOBSD_IMG_TEMPLATE=${NANOBSD_IMG_TEMPLATE:-"${PRODUCT_NAME}${PRODUCT_NAME_SUFFIX}-${PRODUCT_VERSION}${PRODUCT_REVISION:+-p}${PRODUCT_REVISION}-%%SIZE%%-${TARGET}-%%TYPE%%${TIMESTAMP_SUFFIX}.img"}

export NANOBSD_UPGRADE_TEMPLATE=${NANOBSD_UPGRADE_TEMPLATE:-"${PRODUCT_NAME}${PRODUCT_NAME_SUFFIX}-${PRODUCT_VERSION}${PRODUCT_REVISION:+-p}${PRODUCT_REVISION}-%%SIZE%%-${TARGET}-%%TYPE%%-upgrade${TIMESTAMP_SUFFIX}.img"}

# Rsync data to send snapshots

export RSYNCUSER=${RSYNCUSER:-"snapshots"}

export RSYNCPATH=${RSYNCPATH:-"/usr/local/www/snapshots/${TARGET}/${PRODUCT_NAME}_${GIT_REPO_BRANCH_OR_TAG}"}

# staging area used on snapshots build

STAGINGAREA=${STAGINGAREA:-"${SCRATCHDIR}/staging"}

mkdir -p ${STAGINGAREA}

export SNAPSHOTSLOGFILE=${SNAPSHOTSLOGFILE:-"${SCRATCHDIR}/snapshots-build.log"}

export SNAPSHOTSLASTUPDATE=${SNAPSHOTSLASTUPDATE:-"${SCRATCHDIR}/snapshots-lastupdate.log"}

if [ -n "${POUDRIERE_SNAPSHOTS}" ]; then

	export SNAPSHOTS_RSYNCIP=${PKG_RSYNC_HOSTNAME}

	export SNAPSHOTS_RSYNCUSER=${PKG_RSYNC_USERNAME}

else

	export SNAPSHOTS_RSYNCIP=${RSYNCIP}

	export SNAPSHOTS_RSYNCUSER=${RSYNCUSER}

fi

if [ "${PRODUCT_NAME}" = "pfSense" ]; then

	export VENDOR_NAME=${VENDOR_NAME:-"Rubicon Communications, LLC (Netgate)"}

	export OVF_INFO=${OVF_INFO:-"pfSense is a free, open source customized distribution of FreeBSD tailored for use as a firewall and router. In addition to being a powerful, flexible firewalling and routing platform, it includes a long list of related features and a package system allowing further expandability without adding bloat and potential security vulnerabilities to the base distribution. pfSense is a popular project with more than 1 million downloads since its inception, and proven in countless installations ranging from small home networks protecting a PC and an Xbox to large corporations, universities and other organizations protecting thousands of network devices."}

else

	export VENDOR_NAME=${VENDOR_NAME:-"nonSense"}

	export OVF_INFO=${OVF_INFO:-"none"}

fi