Search
Results (245)
- Bug #7562 (Resolved): l2tp remoteip confusion
- in vpn_l2tp.php Remote address range remotei ... ssueips is set. (as it sets to undocumented 0.0.0.0/0 peer). Is remoteip really required? Wh ... ttp://reedmedia.net/books/pfsense/bugs.html )
- Bug #7532 (Resolved): SG-1000 autonegotiation 10baseT speed and duplex
- During work on https://customercare.netgate.c ... psw0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 ... psw0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 ... nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
- Bug #7439 (Closed): IKE_SA (IKEv2) does not r ... st issues IKE_DELETE and connection is closed
- h1. 2.4.0-BETA-amd64-20170228-0411 Both MS ... N Mode: Nunnel IPv4 Local network: Network 0.0.0.0/0 NAT/BINAT translation: None Description: ... emailAddress=XXXXX/CN=XXXXX/“ leftsubnet = 0.0.0.0/0</pre> */var/etc/ipsec/strongswan.conf* ... attr { dns = 172.23.160.1 subnet = 0.0.0.0/0 split-include = 0.0.0.0/0 # Search domain and default domain ... 3 bytes) 0be310f0_o (443892856 bytes) and TS 0.0.0.0/0|/0 === 172.23.152.1/32|/0 Mar 29 17:06:05 ... ished with SPIs cbd4ab9c_i 0af54a92_o and TS 0.0.0.0/0|/0 === 172.23.152.1/32|/0 Mar 29 17:06:05 ... charon 10[CFG] <con1|49> config: 0.0.0.0/0|/0, received: 0.0.0.0/0|/0 => match: 0.0.0.0/0|/0 Mar 29 17:06:05 charon 10 ... :06:05 charon 10[CFG] <con1|49> 0.0.0.0...
- Feature #7410 (Closed): IPSEC multiple dynamic IP remote clients
- We are actually running version 2.3.2 using m ... ). So we tried to specify in Remote Gateway 0.0.0.0 which gives a great result… but only for 1 t ... from what we saw, if we have sevral tunnels, 0.0.0.0 can be specified for only one of them, other ... age by using different hostnames pointing to 0.0.0.0, but even if we don't have this error messag ... lution for allowing more than 1 tunnel using 0.0.0.0 as Remote Gateway, enabling pfsense to handle sevral (dynamic remote ip) tunnels using 0.0.0.0 as remote Gateway, and by doing this accepti ... //forum.pfsense.org/index.php?topic=98956.0
- Bug #7187 (Closed): IPSec IKEv2 additional P2 not written to config
- I have a v2 tunnel with a second P2 NATting t ... one with both the subnets specified. Being 10.0.0.0 LAN and 10.17.17.0 OpenVPN in v1: <pre> leftsubnet = 10.0.0.0/24 leftsubnet = 10.0.0.0/24|10.17.17.0/24 </pre> in v2: <pre> leftsubnet = 10.0.0.0/24,10.0.0.0/24|10.17.17.0/24 </pre> The v2 natted su ... key authentication con8000: child: 10.0.0.0/24|/0 === 10.55.0.128/25|/0 TUNNEL, dpdaction=restart con8001: child: 10.0.0.0/24|10.17.17.0/24 === 10.55.0.128/25|/0 TUNNE ... key authentication con7: child: 10.0.0.0/24|/0 === 192.168.14.0/24|/0 TUNNEL, dpdaction=restart </pre>
- Bug #7167 (Resolved): Error creating higher VLAN ID on SG-1000
- SG-1000 connected to an Apple Airport Extreme ... 127'@ Similar setup works with an SG-2440
- Bug #7108 (Not a Bug): ntp does not keep time on virtualized pfsense
- I run pfsense virtualized under FreeBSD bhyve ... r.hardware="ACPI-fast" kern.hz="100" </pre>
- Feature #7095 (Resolved): Improve Remote Gateway field description for IPSec VPN Phase 1
- I think it would be nice if it would be mentioned that 0.0.0.0 is a valid value for that field So <pre> ... ress or host name of the remote gateway; use 0.0.0.0 to allow connection from any IPv4 address. </pre>
- Bug #7038 (Resolved): SG-1000 Quagga zebra service fails to start with signal 6 abort
- Quagga_OSPF 0.6.16 package installed from pac ... -interface cpsw1 network 10.8.8.0/27 area 0.0.0.0 network 10.8.8.32/27 area 0.0.0.0 network 192.168.1.0/24 area 0.0.0.0 area 0.0.0.0 authentication </pre> Zebra config: <pr ... 07 CDT 2016 FreeBSD 10.3-RELEASE-p9 </pre>
- Bug #7027 (Resolved): Dynamic DNS dyndns.org no longer updates
- Have paid DynDNS.org service - used to work - ... s.org. Also ip check always comes back with 0.0.0.0 in service config screen and dashboard widge ... s_edit.php: Dynamic DNS: updatedns() starting