Search
Results (252)
- Bug #3016 (Resolved): IPsec client (or branch office) can't access to Internet over VPN gateway
- Branch office tunnel: Mode: tunnel Local Subnet: LAN Remote Subnet: 0.0.0.0/0 root(1): cat /var/etc/ipsec/spd.conf s ... 154.137.18.2-154.137.18.1/unique; spdadd -4 0.0.0.0/0 192.168.71.144/28 any -P out ipsec esp/tun ... 37.18.2/unique; spdadd -4 192.168.71.144/28 0.0.0.0/0 any -P in ipsec esp/tunnel/154.137.18.2-15 ... l Local Subnet: LAN Remote Subnet: 0.0.0.0/0 : cat /var/etc/ipsec/spd.conf spdadd - ... 66075ed> Workaround: Instead one tunnel 0.0.0.0/0 use two tunnels 0.0.0.0/1 and 128.0.0.0/1
- Bug #2891 (Rejected): Limiter does not work with high speed
- On 2.0.2 limiters only work up til aprox. 15M ... (TM)2 Quad CPU Q9400 @ 2.66GHz BR. Anders
- Bug #2852 (Resolved): interfaces.php static route check too strict
- interfaces.php checks for "This IPv4/IPv6 add ... e. For instance, with a static route of 10.0.0.0/8, an interface with 10.0.0.1/24 configured ... t is currently rejected). A static route of 10.0.0.0/24 with an interface IP of 10.0.0.1/24 is not valid. Same for IPv6.
- Todo #2814 (Closed): OpenVPN push route hint on configuration page is misleading
- On the OpenVPN server configuration page it s ... arated by a semicolon EXAMPLE: push "route 10.0.0.0 255.255.255.0"; </pre> It would be help ... nly works in PKI mode, not shared key mode.
- Bug #2526 (Resolved): Limiter appears to break IPv6 connectivity
- IPv6 connectivity through pfSense appears to ... ccess IPv6 and IPv4 resources simultaneously.
- Bug #2495 (Closed): pfsense doesn't seem to know what its WAN IP is
- Having upgraded from stable to 2.1-BETA0 (i38 ... ut in place, presently, pending a better fix.
- Feature #2416 (Resolved): Hybrid NAT mode that is a mix of Auto+Manual
- Often we suggest people switch to manual outb ... hey can benefit from aspects of both methods.
- Bug #2394 (Resolved): IPsec keepalive doesn't work with 0.0.0.0/0 local subnet
- When you have a keepalive IP defined in a phase 2 that uses 0.0.0.0/0 (everything) as the local network, the log ... , since anything matches in that instance.
- Feature #1979 (Resolved): Allow user-defined rules to utilize built-in system aliases
- It would be useful to have some stock aliases ... vate (or perhaps rfc1918) - 192.168.0.0/16, 10.0.0.0/8, and 172.16.0.0/12 * ipv6_linklocal - fe8 ... aliases for the same values on every system.
- Bug #1970 (Resolved): IPsec stops routing after a while
- Using the same setup as this bug: http://red ... es Phase 2: Mode: tunnel Local network: 0.0.0.0/0 Protocol: ESP Encryption: AES, 3des Hash: md5 PFS off