|
Short press detected, entering the factory-defaults recovery mode.
|
|
Waiting for the long press to confirm.
|
|
|
|
|
|
***********************************************************************
|
|
* Reset button pressed - resetting configuration to factory defaults. *
|
|
* All additional packages installed will be removed *
|
|
* The system will reboot after this completes. *
|
|
***********************************************************************
|
|
|
|
Stopping /usr/local/etc/rc.d/lighttpd_ls.sh...done.
|
|
Stopping /usr/local/etc/rc.d/node_exporter.sh...done.
|
|
Stopping /usr/local/etc/rc.d/sqp_monitor.sh...done.
|
|
Stopping /usr/local/etc/rc.d/squid.sh...done.
|
|
Waiting (max 60 seconds) for system process `vnlru' to stop... done
|
|
Waiting (max 60 seconds) for system process `syncer' to stop...
|
|
Syncing disks, vnodes remaining... 0 0 0 done
|
|
All buffers synced.
|
|
Uptime: 53s
|
|
uhub0: detached
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
isSecurebootEnabled = 01
|
|
secureboot not enabled
|
|
Loading Usb Lens...
|
|
Provider: Insyde Software
|
|
Version: 05.12.02.0040.0009.15
|
|
Product: BlinkBoot(R) Harrisonville USB Lens
|
|
Licensee: Silicom Ltd.
|
|
Start: 03/20/2018
|
|
End: 12/31/2099
|
|
|
|
Validating Signature... [Pass]
|
|
|
|
Installing Usb Lens...
|
|
|
|
Loading Nvme Lens...
|
|
Provider: Insyde Software
|
|
Version: 05.12.02.0040.0009.15
|
|
Product: BlinkBoot(R) Harrisonville NVMe Lens
|
|
Licensee: Silicom Ltd.
|
|
Start: 11/16/2020
|
|
End: 12/31/2099
|
|
|
|
Validating Signature... [Pass]
|
|
|
|
Installing Nvme Lens...
|
|
|
|
Loading Sata Lens...
|
|
Provider: Insyde Software
|
|
Version: 05.12.02.0040.0009.15
|
|
Product: BlinkBoot(R) Harrisonville SATA Lens
|
|
Licensee: Silicom Ltd.
|
|
Start: 03/20/2018
|
|
End: 12/31/2099
|
|
|
|
Validating Signature... [Pass]
|
|
|
|
Installing Sata Lens...
|
|
|
|
Loading SdMmc Lens...
|
|
Provider: Insyde Software
|
|
Version: 05.12.02.0040.0009.15
|
|
Product: BlinkBoot(R) Harrisonville SDxx/eMMC Lens
|
|
Licensee: Silicom Ltd.
|
|
Start: 03/20/2018
|
|
End: 12/31/2099
|
|
|
|
Validating Signature... [Pass]
|
|
|
|
Installing SdMmc Lens...
|
|
|
|
Mapping table
|
|
FS2: Alias(s):F0:
|
|
Fv(E35C4A77-3D00-4337-A625-B980A9E00F6C)
|
|
FS4: Alias(s):F0:
|
|
Fv(F9657F27-CAE7-4951-A406-D286157B63EF)
|
|
FS3: Alias(s):F0:
|
|
Fv(E7082AE5-3036-407A-8060-FDF027F74632)
|
|
FS0: Alias(s):F0:
|
|
Fv(1643501D-ABD6-4ECC-85DE-3D95D23423FE)
|
|
FS1: Alias(s):F0:
|
|
Fv(50E81C5A-EAB2-495C-871E-EF46044C8959)
|
|
FS5: Alias(s):HD20b:;BLK1:
|
|
PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,5BF4CD1A-A988-11ED-8CEC-897F5BF3F01D,0x3,0x82000)
|
|
BLK0: Alias(s):
|
|
PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)
|
|
BLK2: Alias(s):
|
|
PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(2,GPT,5BF4CD1F-A988-11ED-8CEC-897F5BF3F01D,0x82003,0x1CB1FF5)
|
|
Locking SPI ...
|
|
Launching Lock flash...
|
|
Already Lock the SPI
|
|
Error. 8BE4DF61-93CA-11D2-AA0D-00E098032B8C - BootNext - unable to set: Not Found
|
|
Checking Hotkey...
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Key Options:
|
|
'r' -- Clear boot order list.
|
|
'p' -- PXE boot.
|
|
'F2' -- Boot Manager Menu.
|
|
Any key to continue
|
|
Error. C450ED8E-C3C2-4FE7-AEE6-D1C50ABB78CF - PXEVariable - unable to set: Not Found
|
|
Error. C450ED8E-C3C2-4FE7-AEE6-D1C50ABB78CF - RestOrderVariable - unable to set: Not Found
|
|
Option: 00. Variable: Boot0013
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,5BF4CD1A-A988-11ED-8CEC-897F5BF3F01D,0x3,0x82000)/\EFI\BOOT\bootx64.efi
|
|
Optional- N
|
|
BootOrder0000:FS5:\EFI\BOOT\bootx64.efi
|
|
Option: 01. Variable: Boot0012
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x1,0x0)/HD(1,GPT,5BF4CD1A-A988-11ED-8CEC-897F5BF3F01D,0x3,0x82000)/\EFI\BOOT\bootx64.efi
|
|
Optional- N
|
|
Option: 02. Variable: Boot0011
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,D048D2B4-B6EA-11ED-9ACB-90EC771F8C3F,0x28,0x82000)/\efi\boot\bootx64.efi
|
|
Optional- N
|
|
Option: 03. Variable: Boot0010
|
|
Desc - FreeBSD
|
|
DevPath - HD(1,GPT,D048D2B4-B6EA-11ED-9ACB-90EC771F8C3F,0x28,0x82000)/\efi\freebsd\loader.efi
|
|
Optional- N
|
|
Option: 04. Variable: Boot000F
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x2,0x0)/HD(1,MBR,0x90909090,0x1,0x10418)/\EFI\BOOT\bootx64.efi
|
|
Optional- N
|
|
Option: 05. Variable: Boot000E
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,3BB92395-A1A0-11ED-AADE-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 06. Variable: Boot000D
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x2,0x0)/HD(1,MBR,0x90909090,0x1,0x20000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 07. Variable: Boot000C
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,9A9A1083-A173-11ED-9994-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 08. Variable: Boot000B
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x6,0x0)/HD(1,MBR,0x90909090,0x1,0x20000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 09. Variable: Boot000A
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,AB3FD5A0-9EAB-11ED-9424-90EC771F8C3F,0x28,0x82000)/\efi\boot\bootx64.efi
|
|
Optional- N
|
|
Option: 0A. Variable: Boot0009
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x1,0x0)/HD(1,MBR,0x90909090,0x1,0x10418)/\EFI\BOOT\bootx64.efi
|
|
Optional- N
|
|
Option: 0B. Variable: Boot0008
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,856AB062-EC12-11EC-B466-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 0C. Variable: Boot0007
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,5C35E7C5-EB43-11EC-9832-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 0D. Variable: Boot0006
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,930C88AA-EB3E-11EC-A469-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 0E. Variable: Boot0005
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,E29FF58D-EB32-11EC-9A8F-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 0F. Variable: Boot0004
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,C728CB0C-D627-11EC-940E-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 10. Variable: Boot0003
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,94226BA7-D619-11EC-99E9-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 11. Variable: Boot0002
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x1,0x0)/HD(1,MBR,0x90909090,0x1,0x20000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 12. Variable: Boot0001
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,E99BD7A0-CFB0-11EC-A21E-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 13. Variable: Boot0000
|
|
Desc - PXE-0
|
|
DevPath - Fv(E35C4A77-3D00-4337-A625-B980A9E00F6C)/\pxe_0.nsh
|
|
Optional- N
|
|
BootOrder0013:FS2:\pxe_0.nsh
|
|
Shell> map -r
|
|
Mapping table
|
|
FS2: Alias(s):F0:
|
|
Fv(E35C4A77-3D00-4337-A625-B980A9E00F6C)
|
|
FS4: Alias(s):F0:
|
|
Fv(F9657F27-CAE7-4951-A406-D286157B63EF)
|
|
FS3: Alias(s):F0:
|
|
Fv(E7082AE5-3036-407A-8060-FDF027F74632)
|
|
FS0: Alias(s):F0:
|
|
Fv(1643501D-ABD6-4ECC-85DE-3D95D23423FE)
|
|
FS1: Alias(s):F0:
|
|
Fv(50E81C5A-EAB2-495C-871E-EF46044C8959)
|
|
FS5: Alias(s):HD20b:;BLK1:
|
|
PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,5BF4CD1A-A988-11ED-8CEC-897F5BF3F01D,0x3,0x82000)
|
|
BLK0: Alias(s):
|
|
PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)
|
|
BLK2: Alias(s):
|
|
PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(2,GPT,5BF4CD1F-A988-11ED-8CEC-897F5BF3F01D,0x82003,0x1CB1FF5)
|
|
Shell> bcfg boot dump
|
|
Option: 00. Variable: Boot0013
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,5BF4CD1A-A988-11ED-8CEC-897F5BF3F01D,0x3,0x82000)/\EFI\BOOT\bootx64.efi
|
|
Optional- N
|
|
BootOrder0000:FS5:\EFI\BOOT\bootx64.efi
|
|
Option: 01. Variable: Boot0012
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x1,0x0)/HD(1,GPT,5BF4CD1A-A988-11ED-8CEC-897F5BF3F01D,0x3,0x82000)/\EFI\BOOT\bootx64.efi
|
|
Optional- N
|
|
Option: 02. Variable: Boot0011
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,D048D2B4-B6EA-11ED-9ACB-90EC771F8C3F,0x28,0x82000)/\efi\boot\bootx64.efi
|
|
Optional- N
|
|
Option: 03. Variable: Boot0010
|
|
Desc - FreeBSD
|
|
DevPath - HD(1,GPT,D048D2B4-B6EA-11ED-9ACB-90EC771F8C3F,0x28,0x82000)/\efi\freebsd\loader.efi
|
|
Optional- N
|
|
Option: 04. Variable: Boot000F
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x2,0x0)/HD(1,MBR,0x90909090,0x1,0x10418)/\EFI\BOOT\bootx64.efi
|
|
Optional- N
|
|
Option: 05. Variable: Boot000E
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,3BB92395-A1A0-11ED-AADE-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 06. Variable: Boot000D
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x2,0x0)/HD(1,MBR,0x90909090,0x1,0x20000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 07. Variable: Boot000C
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,9A9A1083-A173-11ED-9994-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 08. Variable: Boot000B
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x6,0x0)/HD(1,MBR,0x90909090,0x1,0x20000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 09. Variable: Boot000A
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,AB3FD5A0-9EAB-11ED-9424-90EC771F8C3F,0x28,0x82000)/\efi\boot\bootx64.efi
|
|
Optional- N
|
|
Option: 0A. Variable: Boot0009
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x1,0x0)/HD(1,MBR,0x90909090,0x1,0x10418)/\EFI\BOOT\bootx64.efi
|
|
Optional- N
|
|
Option: 0B. Variable: Boot0008
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,856AB062-EC12-11EC-B466-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 0C. Variable: Boot0007
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,5C35E7C5-EB43-11EC-9832-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 0D. Variable: Boot0006
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,930C88AA-EB3E-11EC-A469-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 0E. Variable: Boot0005
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,E29FF58D-EB32-11EC-9A8F-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 0F. Variable: Boot0004
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,C728CB0C-D627-11EC-940E-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 10. Variable: Boot0003
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,94226BA7-D619-11EC-99E9-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 11. Variable: Boot0002
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x15,0x0)/USB(0x1,0x0)/HD(1,MBR,0x90909090,0x1,0x20000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 12. Variable: Boot0001
|
|
Desc - bootx64.efi
|
|
DevPath - PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,E99BD7A0-CFB0-11EC-A21E-90EC771F8C3F,0x28,0x64000)/\efi\boot\BOOTx64.efi
|
|
Optional- N
|
|
Option: 13. Variable: Boot0000
|
|
Desc - PXE-0
|
|
DevPath - Fv(E35C4A77-3D00-4337-A625-B980A9E00F6C)/\pxe_0.nsh
|
|
Optional- N
|
|
BootOrder0013:FS2:\pxe_0.nsh
|
|
Shell> echo %BootOrder0000%
|
|
FS5:\EFI\BOOT\bootx64.efi
|
|
Shell> %BootOrder0000%
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Consoles: EFI console
|
|
Reading loader env vars from /efi/freebsd/loader.env
|
|
Setting currdev to disk0p1:
|
|
FreeBSD/amd64 EFI loader, Revision 1.1
|
|
(Fri Feb 10 20:27:51 UTC 2023 root@freebsd)
|
|
|
|
Command line arguments: FS5:\EFI\BOOT\bootx64.efi
|
|
Image base: 0x74f0f000
|
|
EFI version: 2.50
|
|
EFI Firmware: Insyde May 3 2022 11:32:00 (rev 0.00)
|
|
Console: efi (0x1000)
|
|
Load Path: \EFI\BOOT\bootx64.efi
|
|
Load Device: PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,5BF4CD1A-A988-11ED-8CEC-897F5BF3F01D,0x3,0x82000)
|
|
BootOrder: 0013 0012 0011 0010 000f 000e 000d 000c 000b 000a 0009 0008 0007 0006 0005 0004 0003 0002 0001 0000
|
|
Trying ESP: PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(1,GPT,5BF4CD1A-A988-11ED-8CEC-897F5BF3F01D,0x3,0x82000)
|
|
Setting currdev to disk0p1:
|
|
Trying: PciRoot(0x0)/Pci(0x1C,0x0)/Msg(29,00)/Ctrl(0x0)/HD(2,GPT,5BF4CD1F-A988-11ED-8CEC-897F5BF3F01D,0x82003,0x1CB1FF5)
|
|
Setting currdev to zfs:pfSense/ROOT/default:
|
|
Loading /boot/defaults/loader.conf
|
|
Loading /boot/defaults/loader.conf
|
|
Loading /boot/device.hints
|
|
Loading /boot/loader.conf
|
|
Loading /boot/loader.conf.local
|
|
/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
\ __
|
|
_ __ / _|___ ___ _ __ ___ ___ _
|
|
| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_
|
|
| |_) | _\__ \ __/ | | \__ \ __/ |_ _|
|
|
| .__/|_| |___/\___|_| |_|___/\___| |_|
|
|
|_|
|
|
๏ฟฝ๏ฟฝ๏ฟฝฺB๏ฟฝ
|
|
|
|
---- Welcome to Netgate pfSense Plu๏ฟฝ[11;5H1. Boot Multi user [Enter]______
|
|
| | / ___\
|
|
| | | /`
|
|
| 2. Boot Single user | | / :-|
|
|
| 3. Escape to loader prompt | | _________ ___/ /_ |
|
|
| 4. Reboot | | /` ____ / /__ ___/ |
|
|
| 5. Cons: Serial | | / / / / / / |
|
|
| | | / /___/ / / / |
|
|
| Options: | | / ______/ / / _ |
|
|
| 6. Kernel: default/kernel (1 of 2) | |/ / / / _| |_ |
|
|
| 7. Boot Options | / /___/ |_ _| |
|
|
| 8. Boot Environments | / |_| |
|
|
| | /_________________________/
|
|
+-----------------------------------------+ !|
|
|
Autoboot in 0 seconds. [Space] to pause
|
|
|
|
Loading kernel...
|
|
/boot/kernel/kernel text=0x19b408 text=0xfe5bc8 text=0x17d9b80 data=0x180 data=0x266d68+0x398298 0x8+0x1c9950+0x8+0x1d62e6
|
|
Loading configured modules...
|
|
can't find '/boot/entropy'
|
|
/boot/kernel/zfs.ko size 0x5ba0d8 at 0x35a0000
|
|
/boot/kernel/opensolaris.ko size 0xaab0 at 0x3b5b000
|
|
can't find '/etc/hostid'
|
|
staging 0x64800000 (not copying) tramp 0x74db4000 PT4 0x73c08000
|
|
Start @ 0xffffffff8039c000 ...
|
|
EFI framebuffer information:
|
|
addr, size 0x0, 0x0
|
|
dimensions 0 x 0
|
|
stride 0
|
|
masks 0x00000000, 0x00000000, 0x00000000, 0x00000000
|
|
GDB: no debug ports present
|
|
KDB: debugger backends: ddb
|
|
KDB: current backend: ddb
|
|
---<<BOOT>>---
|
|
Copyright (c) 1992-2023 The FreeBSD Project.
|
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
The Regents of the University of California. All rights reserved.
|
|
FreeBSD is a registered trademark of The FreeBSD Foundation.
|
|
FreeBSD 14.0-CURRENT #0 plus-RELENG_23_05-n256095-07a58678065: Tue May 9 23:11:10 UTC 2023
|
|
root@freebsd:/var/jenkins/workspace/pfSense-Plus-snapshots-23_05-main/obj/amd64/IZb37dS4/var/jenkins/workspace/pfSense-Plus-snapshots-23_05-main/sources/FreeBSD-src-plus-RELENG_23_05/amd64.amd64/sys/pfSense amd64
|
|
FreeBSD clang version 15.0.7 (https://github.com/llvm/llvm-project.git llvmorg-15.0.7-0-g8dfdcc7b7bf6)
|
|
VT(vga): resolution 640x480
|
|
CPU: Intel(R) Atom(TM) CPU C3338R @ 1.80GHz (1800.18-MHz K8-class CPU)
|
|
Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1
|
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
|
|
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
|
|
AMD Features2=0x101<LAHF,Prefetch>
|
|
Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
|
|
Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD>
|
|
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
|
|
IA32_ARCH_CAPS=0xc69<RDCL_NO,SKIP_L1DFL_VME,MDS_NO>
|
|
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
|
|
TSC: P-state invariant, performance statistics
|
|
real memory = 4294967296 (4096 MB)
|
|
avail memory = 3965308928 (3781 MB)
|
|
Event timer "LAPIC" quality 600
|
|
ACPI APIC Table: <INSYDE H2O BIOS>
|
|
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
|
|
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
|
|
FreeBSD/SMP: 1 package(s) x 2 core(s)
|
|
random: registering fast source Intel Secure Key RNG
|
|
random: fast provider: "Intel Secure Key RNG"
|
|
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
|
|
ioapic0 <Version 2.0> irqs 0-119
|
|
Launching APs: 1
|
|
TCP_ratelimit: Is now initialized
|
|
wlan: mac acl policy registered
|
|
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
|
|
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8074daf0, 0) error 1
|
|
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
|
|
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8074dba0, 0) error 1
|
|
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
|
|
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8074dc50, 0) error 1
|
|
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
|
|
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8076b080, 0) error 1
|
|
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
|
|
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8076b130, 0) error 1
|
|
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
|
|
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8076b1e0, 0) error 1
|
|
random: entropy device external interface
|
|
kbd0 at kbdmux0
|
|
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
|
|
vtvga0: <VT VGA driver>
|
|
netgate0: <Netgate 4100>
|
|
efirtc0: <EFI Realtime Clock>
|
|
efirtc0: registered as a time-of-day clock, resolution 1.000000s
|
|
smbios0: <System Management BIOS> at iomem 0x7c51d000-0x7c51d01e
|
|
smbios0: Version: 3.0, BCD Revision: 3.0
|
|
acpi0: <INSYDE H2O BIOS>
|
|
acpi0: Power Button (fixed)
|
|
unknown: I/O range not supported
|
|
cpu0: <ACPI CPU> on acpi0
|
|
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
|
|
Timecounter "HPET" frequency 24000000 Hz quality 950
|
|
Event timer "HPET" frequency 24000000 Hz quality 550
|
|
Event timer "HPET1" frequency 24000000 Hz quality 440
|
|
Event timer "HPET2" frequency 24000000 Hz quality 440
|
|
Event timer "HPET3" frequency 24000000 Hz quality 440
|
|
Event timer "HPET4" frequency 24000000 Hz quality 440
|
|
Event timer "HPET5" frequency 24000000 Hz quality 440
|
|
Event timer "HPET6" frequency 24000000 Hz quality 440
|
|
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
|
|
atrtc0: Warning: Couldn't map I/O.
|
|
atrtc0: registered as a time-of-day clock, resolution 1.000000s
|
|
Event timer "RTC" frequency 32768 Hz quality 0
|
|
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
|
|
Timecounter "i8254" frequency 1193182 Hz quality 0
|
|
Event timer "i8254" frequency 1193182 Hz quality 100
|
|
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
|
|
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
|
|
pci0: <ACPI PCI bus> on pcib0
|
|
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
|
|
pci1: <ACPI PCI bus> on pcib1
|
|
pci1: <processor> at device 0.0 (no driver attached)
|
|
pcib2: <ACPI PCI-PCI bridge> mem 0x81500000-0x8151ffff at device 10.0 on pci0
|
|
pci2: <ACPI PCI bus> on pcib2
|
|
pcib3: <ACPI PCI-PCI bridge> mem 0x81520000-0x8153ffff at device 11.0 on pci0
|
|
pci3: <ACPI PCI bus> on pcib3
|
|
pcib4: <ACPI PCI-PCI bridge> mem 0x81540000-0x8155ffff at device 12.0 on pci0
|
|
pci4: <ACPI PCI bus> on pcib4
|
|
igc0: <Intel(R) Ethernet Controller I225-V> mem 0x81300000-0x813fffff,0x81400000-0x81403fff at device 0.0 on pci4
|
|
igc0: Using 1024 TX descriptors and 1024 RX descriptors
|
|
igc0: Using 2 RX queues 2 TX queues
|
|
igc0: Using MSI-X interrupts with 3 vectors
|
|
igc0: Ethernet address: 90:ec:77:1f:8c:3f
|
|
igc0: netmap queues/slots: TX 2/1024, RX 2/1024
|
|
pcib5: <ACPI PCI-PCI bridge> mem 0x81560000-0x8157ffff at device 14.0 on pci0
|
|
pci5: <ACPI PCI bus> on pcib5
|
|
igc1: <Intel(R) Ethernet Controller I225-V> mem 0x81100000-0x811fffff,0x81200000-0x81203fff at device 0.0 on pci5
|
|
igc1: Using 1024 TX descriptors and 1024 RX descriptors
|
|
igc1: Using 2 RX queues 2 TX queues
|
|
igc1: Using MSI-X interrupts with 3 vectors
|
|
igc1: Ethernet address: 90:ec:77:1f:8c:40
|
|
igc1: netmap queues/slots: TX 2/1024, RX 2/1024
|
|
pcib6: <ACPI PCI-PCI bridge> mem 0x81580000-0x8159ffff at device 15.0 on pci0
|
|
pci6: <ACPI PCI bus> on pcib6
|
|
igc2: <Intel(R) Ethernet Controller I225-V> mem 0x80f00000-0x80ffffff,0x81000000-0x81003fff at device 0.0 on pci6
|
|
igc2: Using 1024 TX descriptors and 1024 RX descriptors
|
|
igc2: Using 2 RX queues 2 TX queues
|
|
igc2: Using MSI-X interrupts with 3 vectors
|
|
igc2: Ethernet address: 90:ec:77:1f:8c:41
|
|
igc2: netmap queues/slots: TX 2/1024, RX 2/1024
|
|
pcib7: <ACPI PCI-PCI bridge> mem 0x815a0000-0x815bffff at device 16.0 on pci0
|
|
pci7: <ACPI PCI bus> on pcib7
|
|
igc3: <Intel(R) Ethernet Controller I225-V> mem 0x80d00000-0x80dfffff,0x80e00000-0x80e03fff at device 0.0 on pci7
|
|
igc3: Using 1024 TX descriptors and 1024 RX descriptors
|
|
igc3: Using 2 RX queues 2 TX queues
|
|
igc3: Using MSI-X interrupts with 3 vectors
|
|
igc3: Ethernet address: 90:ec:77:1f:8c:42
|
|
igc3: netmap queues/slots: TX 2/1024, RX 2/1024
|
|
xhci0: <Intel Denverton USB 3.0 controller> mem 0x815c0000-0x815cffff at device 21.0 on pci0
|
|
xhci0: 32 bytes context size, 64-bit DMA
|
|
usbus0 on xhci0
|
|
usbus0: 5.0Gbps Super Speed USB v3.0
|
|
pcib8: <ACPI PCI-PCI bridge> at device 22.0 on pci0
|
|
pci8: <ACPI PCI bus> on pcib8
|
|
ix0: <Intel(R) X553 L (KR Backplane)> mem 0x80400000-0x805fffff,0x80604000-0x80607fff at device 0.0 on pci8
|
|
ix0: Using 2048 TX descriptors and 2048 RX descriptors
|
|
ix0: Using 2 RX queues 2 TX queues
|
|
ix0: Using MSI-X interrupts with 3 vectors
|
|
ix0: allocated for 2 queues
|
|
ix0: allocated for 2 rx queues
|
|
ix0: Ethernet address: ff:ff:ff:ff:ff:ff
|
|
ix0: eTrack 0x80000847
|
|
ix0: netmap queues/slots: TX 2/2048, RX 2/2048
|
|
ix1: <Intel(R) X553 L (KR Backplane)> mem 0x80200000-0x803fffff,0x80600000-0x80603fff at device 0.1 on pci8
|
|
ix1: Using 2048 TX descriptors and 2048 RX descriptors
|
|
ix1: Using 2 RX queues 2 TX queues
|
|
ix1: Using MSI-X interrupts with 3 vectors
|
|
ix1: allocated for 2 queues
|
|
ix1: allocated for 2 rx queues
|
|
ix1: Ethernet address: ff:ff:ff:ff:ff:ff
|
|
ix1: eTrack 0x80000847
|
|
ix1: netmap queues/slots: TX 2/2048, RX 2/2048
|
|
pcib9: <ACPI PCI-PCI bridge> at device 23.0 on pci0
|
|
pci9: <ACPI PCI bus> on pcib9
|
|
ix2: <Intel(R) X553 L (1GbE)> mem 0x80a00000-0x80bfffff,0x80c04000-0x80c07fff at device 0.0 on pci9
|
|
ix2: Using 2048 TX descriptors and 2048 RX descriptors
|
|
ix2: Using 2 RX queues 2 TX queues
|
|
ix2: Using MSI-X interrupts with 3 vectors
|
|
ix2: allocated for 2 queues
|
|
ix2: allocated for 2 rx queues
|
|
ix2: Ethernet address: 90:ec:77:1f:8c:3e
|
|
ix2: eTrack 0x80000889
|
|
ix2: netmap queues/slots: TX 2/2048, RX 2/2048
|
|
ix3: <Intel(R) X553 L (1GbE)> mem 0x80800000-0x809fffff,0x80c00000-0x80c03fff at device 0.1 on pci9
|
|
ix3: Using 2048 TX descriptors and 2048 RX descriptors
|
|
ix3: Using 2 RX queues 2 TX queues
|
|
ix3: Using MSI-X interrupts with 3 vectors
|
|
ix3: allocated for 2 queues
|
|
ix3: allocated for 2 rx queues
|
|
ix3: Ethernet address: 90:ec:77:1f:8c:3d
|
|
ix3: eTrack 0x80000889
|
|
ix3: netmap queues/slots: TX 2/2048, RX 2/2048
|
|
pci0: <simple comms> at device 24.0 (no driver attached)
|
|
sdhci_pci0: <Intel Denverton eMMC 5.0 Controller> mem 0x815d6000-0x815d6fff,0x815d7000-0x815d7fff at device 28.0 on pci0
|
|
sdhci_pci0: 1 slot(s) allocated
|
|
mmc0: <MMC/SD bus> on sdhci_pci0
|
|
isab0: <PCI-ISA bridge> at device 31.0 on pci0
|
|
isa0: <ISA bus> on isab0
|
|
pci0: <memory> at device 31.2 (no driver attached)
|
|
pci0: <serial bus> at device 31.5 (no driver attached)
|
|
acpi_button0: <Power Button> on acpi0
|
|
acpi_tz0: <Thermal Zone> on acpi0
|
|
ns8250: UART FCR is broken0 class UART with FIFOs> port 0x3f8-0x3ff irq 16 flags 0x10 on acpi0
|
|
uart0: console (115200,n,8,1)
|
|
uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 17 on acpi0
|
|
est0: <Enhanced SpeedStep Frequency Control> on cpu0
|
|
Timecounter "TSC" frequency 1799999668 Hz quality 1000
|
|
Timecounters tick every 1.000 msec
|
|
ZFS filesystem version: 5
|
|
ZFS storage pool version: features support (5000)
|
|
[nl_generic_kpi] genl_register_family: Registered family nlctrl id 16
|
|
[nl_generic_kpi] genl_register_cmds: Adding cmd GETFAMILY(3) to family nlctrl
|
|
[nl_generic_kpi] genl_register_family: Registered family carp id 17
|
|
[nl_generic_kpi] genl_register_cmds: Adding cmd SIOCGVH(1) to family carp
|
|
[nl_generic_kpi] genl_register_cmds: Adding cmd SIOCSVH(2) to family carp
|
|
ugen0.1: <Intel XHCI root HUB> at usbus0
|
|
uhub0 on usbus0
|
|
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
|
|
mmcsd0: 16GB <MMCHC TB2916 9.0 SN 332CD865 MFG 09/2020 by 112 0x0000> at mmc0 50.0MHz/8bit/65535-block
|
|
mmcsd0boot0: 4MB partition 1 at mmcsd0
|
|
mmcsd0boot1: 4MB partition 2 at mmcsd0
|
|
mmcsd0rpmb: 4MB partition 3 at mmcsd0
|
|
random: unblocking device.
|
|
Trying to mount root from zfs:pfSense/ROOT/default []...
|
|
uhub0: 8 ports with 8 removable, self powered
|
|
Root mount waiting for: CAM
|
|
Root mount waiting for: CAM
|
|
Root mount waiting for: CAM
|
|
Root mount waiting for: CAM
|
|
Root mount waiting for: CAM
|
|
Root mount waiting for: CAM
|
|
Root mount waiting for: CAM
|
|
Root mount waiting for: CAM
|
|
Root mount waiting for: CAM
|
|
Netgate Cordoba GPIO Driver 0.4 loaded
|
|
cordbuc0: <Netgate Cordoba IO controller> at port 0x800 on isa0
|
|
gpio0: <Cordoba uC GPIO controller> on cordbuc0
|
|
gpiobus0: <GPIO bus> on gpio0
|
|
gpioled0: <GPIO led> at pin 0 on gpiobus0
|
|
gpioled1: <GPIO led> at pin 1 on gpiobus0
|
|
gpioled10: <GPIO led> at pin 10 on gpiobus0
|
|
gpioled11: <GPIO led> at pin 11 on gpiobus0
|
|
gpioled2: <GPIO led> at pin 2 on gpiobus0
|
|
gpioled3: <GPIO led> at pin 3 on gpiobus0
|
|
gpioled4: <GPIO led> at pin 4 on gpiobus0
|
|
gpioled5: <GPIO led> at pin 5 on gpiobus0
|
|
gpioled6: <GPIO led> at pin 6 on gpiobus0
|
|
gpioled7: <GPIO led> at pin 7 on gpiobus0
|
|
gpioled8: <GPIO led> at pin 8 on gpiobus0
|
|
gpioled9: <GPIO led> at pin 9 on gpiobus0
|
|
gpioc0: <GPIO controller> on gpio0
|
|
Configuring crash dumps...
|
|
No suitable dump device was found.
|
|
Filesystems are clean, continuing...
|
|
Mounting filesystems...
|
|
Mounting ZFS boot environment... done.
|
|
Restoring contents of RAM disk store... done.
|
|
|
|
__
|
|
_ __ / _|___ ___ _ __ ___ ___ _
|
|
| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_
|
|
| |_) | _\__ \ __/ | | \__ \ __/ |_ _|
|
|
| .__/|_| |___/\___|_| |_|___/\___| |_|
|
|
|_|
|
|
|
|
|
|
Welcome to Netgate pfSense Plus 23.05-RC...
|
|
|
|
...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/lib/engines /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
|
|
32-bit compatibility ldconfig path:
|
|
done.
|
|
External config loader 1.0 is now starting... mmcsd0p1 mmcsd0p2
|
|
Launching the init system...Updating CPU Microcode...
|
|
CPU: Intel(R) Atom(TM) CPU C3338R @ 1.80GHz (1800.00-MHz K8-class CPU)
|
|
Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1
|
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
|
|
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
|
|
AMD Features2=0x101<LAHF,Prefetch>
|
|
Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
|
|
Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD>
|
|
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
|
|
IA32_ARCH_CAPS=0xc69<RDCL_NO,SKIP_L1DFL_VME,MDS_NO>
|
|
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
|
|
TSC: P-state invariant, performance statistics
|
|
Done.
|
|
done.
|
|
Initializing.................. done.
|
|
Starting device manager (devd)...ichsmb0: <Intel Denverton SMBus controller> port 0x2000-0x201f mem 0x815d8000-0x815d80ff at device 31.4 on pci0
|
|
smbus0: <System Management Bus> on ichsmb0
|
|
done.
|
|
Loading configuration....done.
|
|
..............................Updating configuration.........Migrating System Memory RRD file to new format
|
|
.done.
|
|
Checking config backups consistency...done.
|
|
Loading cryptographic accelerator drivers...qat0: <Intel c3xxx QuickAssist> mem 0x80700000-0x8073ffff,0x80740000-0x8077ffff at device 0.0 on pci1
|
|
qat0: qat_dev0 started 6 acceleration engines
|
|
qat0: FW version: 4.18.0
|
|
qat0: Excessive clock measure delay
|
|
qat_ocf0: <QAT engine>
|
|
done.
|
|
Setting up extended sysctls...done.
|
|
Executing early shell commands...done.
|
|
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
|
|
Setting timezone...done.
|
|
Configuring looplo0: link state changed to UP
|
|
back interface...done.
|
|
Starting syslog...done.
|
|
Setting up interfaces microcode...done.
|
|
Configuring loopback interface...done.
|
|
Configuring WAN2 interface...done.
|
|
Configuring LAN2 interface...done.
|
|
Configuring LAN3 interface...done.
|
|
Configuring LAN4 interface...done.
|
|
Configuring LAN interface...done.
|
|
Configuring WAN interface...done.
|
|
Configuring CARP settings...done.
|
|
Syncing OpenVPN settings...done.
|
|
Configuring firewall......done.
|
|
Starting PFLOG...done.
|
|
Setting up gateway monitors...done.
|
|
Setting up static routes...done.
|
|
Setting up DNSs...
|
|
Starting DNS Resolver...done.
|
|
Synchronizing user settings...done.
|
|
Configuring CRON...done.
|
|
Bootstrapping clock...done.
|
|
Starting NTP Server...done.
|
|
Starting webConfigurator...done.
|
|
Starting DHCP service...done.
|
|
Starting DHCPv6 service...done.
|
|
Configuring firewall......done.
|
|
Generating RRD graphs...done.
|
|
Running last steps of acme installation.
|
|
Saving updated package information...
|
|
done.
|
|
Loading package configuration... done.
|
|
Configuring package components...
|
|
Loading package instructions...
|
|
Custom commands...
|
|
Executing custom_php_install_command()...done.
|
|
Menu items... done.
|
|
Writing configuration... done.
|
|
Running last steps of aws-wizard installation.
|
|
Saving updated package information...
|
|
done.
|
|
Loading package configuration... done.
|
|
Configuring package components...
|
|
Custom commands...
|
|
Menu items... done.
|
|
Writing configuration... done.
|
|
Running last steps of ipsec-profile-wizard installation.
|
|
Saving updated package information...
|
|
done.
|
|
Loading package configuration... done.
|
|
Configuring package components...
|
|
Custom commands...
|
|
Menu items... done.
|
|
Writing configuration... done.
|
|
Running last steps of Lightsquid installation.
|
|
Saving updated package information...
|
|
done.
|
|
Loading package configuration... done.
|
|
Configuring package components...
|
|
Loading package instructions...
|
|
Custom commands...
|
|
Executing custom_php_install_command()...
|
|
Remove any existing and create new hardlink for lightsquid lighttpd executable... done.
|
|
Creating Lightsquid web server start-up script... done.
|
|
Creating lightsquid web server config ... done.
|
|
Starting lightsquid lighttpd Service... done.
|
|
done.
|
|
Executing custom_php_resync_config_command()...done.
|
|
Menu items... done.
|
|
Services... done.
|
|
Writing configuration... done.
|
|
Running last steps of Netgate_Firmware_Upgrade installation.
|
|
Saving updated package information...
|
|
done.
|
|
Loading package configuration... done.
|
|
Configuring package components...
|
|
Loading package instructions...
|
|
Custom commands...
|
|
Menu items... done.
|
|
Writing configuration... done.
|
|
Running last steps of node_exporter installation.
|
|
Saving updated package information...
|
|
done.
|
|
Loading package configuration... done.
|
|
Configuring package components...
|
|
Loading package instructions...
|
|
Custom commands...
|
|
Executing custom_php_install_command()...done.
|
|
Executing custom_php_resync_config_command()...done.
|
|
Menu items... done.
|
|
Services... done.
|
|
Writing configuration... done.
|
|
Running last steps of openvpn-client-export installation.
|
|
Saving updated package information...
|
|
done.
|
|
Loading package configuration... done.
|
|
Configuring package components...
|
|
Loading package instructions...
|
|
Custom commands...
|
|
Executing custom_php_install_command()...done.
|
|
Writing configuration... done.
|
|
Running last steps of openvpn-client-import installation.
|
|
Saving updated package information...
|
|
done.
|
|
Loading package configuration... done.
|
|
Configuring package components...
|
|
Loading package instructions...
|
|
Custom commands...
|
|
Writing configuration... done.
|
|
Running last steps of squid installation.
|
|
Saving updated package information...
|
|
done.
|
|
Loading package configuration... done.
|
|
Configuring package components...
|
|
Loading package instructions...
|
|
Custom commands...
|
|
Executing custom_php_install_command()...done.
|
|
Executing custom_php_resync_config_command()...done.
|
|
Menu items... done.
|
|
Services... done.
|
|
Writing configuration... done.
|
|
Running last steps of squidGuard installation.
|
|
Saving updated package information...
|
|
done.
|
|
Loading package configuration... done.
|
|
Configuring package components...
|
|
Loading package instructions...
|
|
Custom commands...
|
|
Executing custom_php_install_command()...done.
|
|
Executing custom_php_resync_config_command()...done.
|
|
Menu items... done.
|
|
Services... done.
|
|
Writing configuration... done.
|
|
Please visit Services - SquidGuard Proxy Filter - Target Categories and set up at least one category there before enabling SquidGuard. See https://docs.netgate.com/pfsense/en/latest/packages/cache-proxy/squidguard.html for details.Running last steps of System_Patches installation.
|
|
Saving updated package information...
|
|
done.
|
|
Loading package configuration... done.
|
|
Configuring package components...
|
|
Loading package instructions...
|
|
Custom commands...
|
|
Executing custom_php_install_command()...done.
|
|
Menu items... done.
|
|
Writing configuration... done.
|
|
Running last steps of Tailscale installation.
|
|
Saving updated package information...
|
|
done.
|
|
Loading package configuration... done.
|
|
Configuring package components...
|
|
Loading package instructions...
|
|
Custom commands...
|
|
Executing custom_php_install_command()...
|
|
Creating Tailscale interface group... done.
|
|
done.
|
|
Executing custom_php_resync_config_command()...done.
|
|
Menu items... done.
|
|
Services... done.
|
|
Writing configuration... done.
|
|
Running last steps of WireGuard installation.
|
|
Saving updated package information...
|
|
done.
|
|
Loading package configuration... done.
|
|
Configuring package components...
|
|
Loading package instructions...
|
|
Custom commands...
|
|
Executing custom_php_install_command()...done.
|
|
Installing WireGuard early shell commands...done.
|
|
Creating WireGuard interface group...done.
|
|
Creating WireGuard Unbound access list...done.
|
|
Installing WireGuard service...done.
|
|
Applying WireGuard default settings as necessary...done.
|
|
done.
|
|
Executing custom_php_resync_config_command()...done.
|
|
Menu items... done.
|
|
Services... done.
|
|
Writing configuration... done.
|
|
Starting syslog...done.
|
|
Starting CRON... done.
|
|
Starting package acme...done.
|
|
Starting package AWS VPC Wizard...done.
|
|
Starting package IPsec Profile Wizard...done.
|
|
Starting package Lightsquid...done.
|
|
Starting package Netgate Firmware Upgrade...done.
|
|
Starting package node_exporter...done.
|
|
Starting package OpenVPN Client Export Utility...done.
|
|
Starting package OpenVPN Client Import Utility...done.
|
|
Starting package squid3...done.
|
|
Starting package squidGuard...done.
|
|
Starting package System Patches...done.
|
|
Starting package Tailscale...done.
|
|
Starting package WireGuard...done.
|
|
Starting /usr/local/etc/rc.d/c-icap.sh...done.
|
|
Starting /usr/local/etc/rc.d/clamd.sh...done.
|
|
Starting /usr/local/etc/rc.d/lighttpd_ls.sh...done.
|
|
Starting /usr/local/etc/rc.d/sqp_monitor.sh...done.
|
|
Netgate pfSense Plus 23.05-RC amd64 Tue May 09 22:45:57 UTC 2023
|
|
Bootup complete
|
|
|
|
FreeBSD/amd64 (pfSense.home.arpa) (ttyu0)
|
|
|
|
Netgate 4100 - Serial: 2053211262 - Netgate Device ID: 149e925b4142682d8c85
|
|
|
|
*** Welcome to Netgate pfSense Plus 23.05-RC (amd64) on pfSense ***
|
|
|
|
Current Boot Environment: default
|
|
Next Boot Environment: default
|
|
|
|
WAN (wan) -> ix3 -> v4/DHCP4: 172.21.16.206/24
|
|
LAN (lan) -> igc0 -> v4: 192.168.1.1/24
|
|
WAN2 (opt1) -> ix2 ->
|
|
LAN2 (opt2) -> igc1 ->
|
|
LAN3 (opt3) -> igc2 ->
|
|
LAN4 (opt4) -> igc3 ->
|
|
|
|
0) Logout (SSH only) 9) pfTop
|
|
1) Assign Interfaces 10) Filter Logs
|
|
2) Set interface(s) IP address 11) Restart webConfigurator
|
|
3) Reset webConfigurator password 12) PHP shell + Netgate pfSense Plus tools
|
|
4) Reset to factory defaults 13) Update from console
|
|
5) Reboot system 14) Enable Secure Shell (sshd)
|
|
6) Halt system 15) Restore recent configuration
|
|
7) Ping host 16) Restart PHP-FPM
|
|
8) Shell
|
|
|
|
Enter an option:
|