Bug #10254
closedpf error "too many elements" when attempting to load large tables
Added by Jim Pingle almost 5 years ago. Updated over 4 years ago.
100%
Description
On at least pfSense-base-2.4.5.r.20200210.0912 and later, pf fails to load large tables no matter what the limits are in pf:
: pfctl -f /tmp/rules.debug /tmp/rules.debug:23: cannot define table bogonsv6: too many elements. Consider increasing net.pf.request_maxcount. pfctl: Syntax error in config file: pf rules not loaded
However, that OID is not present on 2.4.5:
: sysctl net.pf net.pf.source_nodes_hashsize: 8192 net.pf.states_hashsize: 32768 : sysctl -a | grep request_maxcount 0 :
There is plenty of room in the table hard limit:
: wc -l /etc/bogonsv6 108611 /etc/bogonsv6 : pfctl -sm | grep table table-entries hard limit 2000000
Similar to #9356 on 2.5.0, but in that case we set a higher default for that OID. That does not appear to be possible on 2.4.5.
Tried on amd64 and SG-3100, same result on both.
Updated by Jim Pingle almost 5 years ago
The easiest way to reproduce the problem is to enable blocking of Bogons on any interface with IPv6 configured.
Updated by Jim Pingle almost 5 years ago
Looking in the FreeBSD source, it appears that the code which produces the error (r343520) is present on the branch used for 2.4.5 and in FreeBSD stable/11 but the code which handles the sysctl OID and backend is not ( https://reviews.freebsd.org/D15018, 205176451d5ad5f9fc9540f650e9d7efd1f728f5, rS332404 ).
It would probably be safer to revert the code producing the error than to pull in the larger change. Without that, the error appears to be cosmetic, and if we pull in the other change then we also have to worry about resolving #9356 for 2.4.5.
Updated by Jim Pingle almost 5 years ago
Current snapshots have that change reverted but are still not behaving properly. Even though there appears to be sufficient room in the table space, pf is yielding a memory allocation error:
: wc -l /etc/bogonsv6 108654 /etc/bogonsv6 : pfctl -sm states hard limit 202000 src-nodes hard limit 202000 frags hard limit 5000 table-entries hard limit 400000 : pfctl -f /tmp/rules.debug /tmp/rules.debug:20: cannot define table bogonsv6: Cannot allocate memory pfctl: Syntax error in config file: pf rules not loaded
Similar behavior on amd64 and ARM, but on amd64 it prints an error once and then works the next time, while ARM never works. Rebooting amd64 in this state yields one instance of this allocation error recorded but the table is loaded after boot. Rebooting ARM in this state yields two instances of this error at boot but the ruleset still fails to reload even manually.
Similar configurations work on 2.5.0 with both amd64 and ARM. Tables are loaded, no errors.
Updated by Jim Pingle almost 5 years ago
Looks to be failing around 65k, which was the default limit on net.pf.request_maxcount
: pfctl -T flush -t bogonsv6 : head -n 65535 /etc/bogonsv6-stock > /etc/bogonsv6 : pfctl -f /tmp/rules.debug /tmp/rules.debug:20: cannot define table bogonsv6: Cannot allocate memory pfctl: Syntax error in config file: pf rules not loaded : pfctl -T flush -t bogonsv6 : head -n 65534 /etc/bogonsv6-stock > /etc/bogonsv6 : pfctl -f /tmp/rules.debug : pfctl -T show -t bogonsv6 | wc -l 65533
Updated by Jim Pingle almost 5 years ago
https://github.com/pfsense/FreeBSD-src/commit/8f7d14d3049de4fb6f82c7e97153c4372674a1e7 might need to be reverted, or we should just sync up with what 12.x has for net.pf.request_maxcount
which is probably safer at this point.
Updated by Jim Pingle almost 5 years ago
Current snapshots have the code which allows us to set the request limit via net.pf.request_maxcount
. However, it isn't being set until late in the upgrade process so the first full post-upgrade boot doesn't have a high enough value to allow bogonsv6 to load without errors.
amd64 first post-upgrade boot:
: grep net.pf.request_maxcount /boot/loader.conf net.pf.request_maxcount="2000000" : sysctl net.pf.request_maxcount net.pf.request_maxcount: 500000
After reboot:
: grep net.pf.request_maxcount /boot/loader.conf net.pf.request_maxcount="2000000" : sysctl net.pf.request_maxcount net.pf.request_maxcount: 2000000
SG-3100 first post-upgrade boot (loading bogonsv6 failed):
: grep net.pf.request_maxcount /boot/loader.conf net.pf.request_maxcount="400000" : sysctl net.pf.request_maxcount net.pf.request_maxcount: 65535
SG-3100 after one more reboot (loading bogonsv6 worked):
: grep net.pf.request_maxcount /boot/loader.conf net.pf.request_maxcount="400000" : sysctl net.pf.request_maxcount net.pf.request_maxcount: 400000
Looks like we might need to copy or move the code which sets that value to a place that runs earlier, like when the kernel itself gets upgraded or just after the upgrade starts before it reboots the first time.
Updated by Renato Botelho almost 5 years ago
- Status changed from New to Feedback
- % Done changed from 0 to 100
Applied in changeset 3b6ad495670ca387127dbf72cefb46d909be4fa9.
Updated by Jim Pingle almost 5 years ago
- Status changed from Feedback to In Progress
- Assignee set to Renato Botelho
Something is still not quite right with this value post-upgrade. The first boot after any firmware upgrade (like one snapshot to the next) fails to use the correct value. Later reboots are fine.
: grep request_max /boot/loader.conf net.pf.request_maxcount="400000" : sysctl net.pf.request_maxcount net.pf.request_maxcount: 65535 : pfctl -f /tmp/rules.debug /tmp/rules.debug:20: cannot define table bogonsv6: too many elements. Consider increasing net.pf.request_maxcount. pfctl: Syntax error in config file: pf rules not loaded
That was set in loader.conf before the upgrade, so somehow it is either being ignored or cleared/reset during the upgrade.
This is on ARM (SG-3100) but I see a similar issue on amd64 as well.
Updated by Renato Botelho almost 5 years ago
- Status changed from In Progress to Feedback
pfSense-upgrade 0.74 (on 2.5.0 and 2.4.5) and 0.63 on 2.4.4 will fix it
Updated by Jim Pingle almost 5 years ago
- Status changed from Feedback to In Progress
There is still a problem here we're investigating
Updated by Renato Botelho almost 5 years ago
- Status changed from In Progress to Feedback
- pfSense-upgrade was copying loader.conf to a tmp file before upgrade kernel/rc and copying it back to place after that due to a bug that happened in the past where kernel package was installing a static version of loader.conf
- Reverted that and even after that we noted pieces missing from loader.conf during the upgrade
- Noted SG-3100 kernel package still contains a static version of loader.conf. It means we need the pfSense-upgrade hack back, so I revert the reverted commit and added it back
- Removed loader.conf from non-amd64 archs kernel packages
- Reworked pfSense-upgrade to update rc package before backup loader.conf
We are going to make more tests when new snapshots are available. pfSense-upgrade 0.76 must be used
Updated by Jim Pingle almost 5 years ago
Systems where this problem was due to loader.conf issues appear to be OK on current snapshots. I've upgraded a system which saw the problem on every upgrade in the past and it is OK now.
There is another situation which appears to be similar but isn't the same issue. That has been moved to #10310
Updated by Jim Pingle almost 5 years ago
- Status changed from Feedback to Resolved
Updated by Dmitry Fill over 4 years ago
Just upgraded today to 2.5.0.a.20200901.2100, hitting exact same issue. Seems like regression.
Every reboot have to run:
sysctl -w net.pf.request_maxcount=262144
net.pf.request_maxcount: 65535 -> 262144
even /boot/loader.conf has value from UI
cat /boot/loader.conf
kern.cam.boot_delay=10000
kern.ipc.nmbclusters="1000000"
kern.ipc.nmbjumbop="524288"
kern.ipc.nmbjumbo9="524288"
autoboot_delay="3"
net.pf.request_maxcount="500000"
hw.hn.vf_transparent="0"
hw.hn.use_if_start="1"
Updated by Jim Pingle over 4 years ago
This issue is quite old and resolved in a previous version. I created a new issue for the regression after confirming it: https://redmine.pfsense.org/issues/10861