Actions
Bug #11303
closed
Sticky connections units
Start date:
01/23/2021
Due date:
% Done:
100%
Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
All
Affected Architecture:
Description
Under System/Advanced/Miscellaneous - LoadBalancing description, it is not clear what is the measurement unit(seconds, milliseconds...).
Set the source tracking timeout for sticky connections. By default this is 0, so source tracking is removed as soon as the state expires. Setting this timeout higher will cause the source/destination relationship to persist for longer periods of time.
Updated by Danilo Zrenjanin about 3 years ago
Updated by Jim Pingle about 3 years ago
- Subject changed from Load Balancing - Sticky connections to Sticky connections units
- Category changed from Load Balancer to Multi-WAN
- Assignee set to Jim Pingle
Load Balancer is gone, so this is technically now only a multi-wan setting.
I committed a different change to mention the units.
Updated by Jim Pingle about 3 years ago
- Status changed from New to Feedback
- % Done changed from 0 to 100
Applied in changeset 81f10ba1d0b64e23b7386e21730d4acee2e2944c.
Updated by Danilo Zrenjanin about 3 years ago
- Status changed from Feedback to Resolved
Tested on the latest snapshot. It looks fine. Ticket resolved.
Actions