Bug #11929
closedQuestions about NAT settings
0%
Description
It seems that NAT is not working properly.
I usually use two OpenVPNs to protect my privacy online at the same time, but I upgraded PF to the latest 2.6.0.a.20210516.0100 a few days ago, and the trouble started here.
This is my settings,
A) System / Routing / Gateways -> Added WAN, OpenVPN 1 and OpenVPN 2 (No Groups);
B) Interfaces / Interface Assignments -> Added WAN, LAN, OpenVPN 1 and OpenVPN 2 (No Groups, Wireless, VLANs, QinQs, GREs, GIFs, Bridges, LAGGs);
C) VPN / OpenVPN / Clients -> OpenVPN 1 interface is WAN, and OpenVPN 2 interface is OpenVPN 1;
D) Firewall / NAT / Outbound -> All interfaces changed to OpenVPN 2 (No Port Forward, 1:1, NPt);
E) Firewall / Rules / LAN - Gateway changed to OpenVPN 2 (No Floating, WAN, OpenVPN, OpenVPN 1, OpenVPN2);
F) No Firewall / Aliases, Schedules, Traffic Shaper, Virtual IPs;
The LAN will not have any internet.
Note, OpenVPN 2 has been disabled PING service.
If
D) Firewall / NAT / Outbound -> All interfaces changed to OpenVPN 1 (No Port Forward, 1:1, NPt);
E) Firewall / Rules / LAN - Gateway changed to OpenVPN 1 (No Floating, WAN, OpenVPN, OpenVPN 1, OpenVPN2);
There is no problem.
The temporary solution is,
System / Routing / Gateways / Default gateway -> Change to OpenVPN 2.
Thanks, hope you can fix it.