Bug #11951
closed
IPsec status fails when many tunnels are connected
Added by Maxim A over 3 years ago.
Updated over 2 years ago.
Plus Target Version:
22.01
Affected Architecture:
amd64
Description
How to reproduce:
1. Set wan address 172.16.1.2/24.
2. Create IPSEC IKEv1 P1 with remote 172.16.1.3 and 11 P2 tunnels (or load attached config).
3. Go to Status\IPsec and click "connect"
You will see "Collecting IPsec status information.". After that all web interface will be responding "504 Gateway Time-out".
Tested versions:
2.5.1
2.6.0-DEV
Files
- Subject changed from IPSEC stuck on large configuration (more than 10 P2 tunnels) to IPsec status fails on large configurations
- Status changed from New to In Progress
- Assignee set to Jim Pingle
- Target version set to 2.6.0
- Plus Target Version set to 21.09
I'm working on optimizations for this as a part of ongoing IPsec work, should be solved soon.
- Status changed from In Progress to Feedback
- % Done changed from 0 to 100
- Subject changed from IPsec status fails on large configurations to IPsec status fails when many tunnels are connected
Updating subject for release notes.
- Plus Target Version changed from 21.09 to 22.01
- Status changed from Feedback to Closed
No sign of slowness or failures with many tunnels on the IPsec status page since the fix went in. I've tested with ~20 tunnels connected and it still loads in a reasonable amount of time (~15 seconds at most).
Also available in: Atom
PDF