Project

General

Profile

Actions

Bug #1236

closed

Anyterm package doesn't start after upgrade

Added by Alexandre Paradis about 13 years ago. Updated over 9 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
01/27/2011
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Affected Version:
Affected Plus Version:
Affected Architecture:

Description

After an upgrade, Anyterm doesn't start automaticly.
Restarting the service won't work. I have to reinstall the package.


Files

anyterm6.JPG (55.2 KB) anyterm6.JPG Once u press the restart button, the start button won't start the service Peter Moreno, 08/03/2011 04:18 AM
anyterm7.JPG (52 KB) anyterm7.JPG Service running. Peter Moreno, 08/03/2011 04:18 AM
anyterm1.JPG (29.8 KB) anyterm1.JPG Running the service with default port Peter Moreno, 08/03/2011 04:18 AM
anyterm2.JPG (45.5 KB) anyterm2.JPG The service won't start Peter Moreno, 08/03/2011 04:18 AM
anyterm3.JPG (27.7 KB) anyterm3.JPG Running the service with a port manually Peter Moreno, 08/03/2011 04:18 AM
anyterm4.JPG (48 KB) anyterm4.JPG Ther service start Peter Moreno, 08/03/2011 04:18 AM
anyterm5.JPG (55.4 KB) anyterm5.JPG The restart button won't work, it will stop the service. Peter Moreno, 08/03/2011 04:18 AM
Actions #1

Updated by Chris Buechler about 13 years ago

  • Project changed from pfSense to pfSense Packages
Actions #2

Updated by Alexandre Paradis about 13 years ago

Just upgraded to RC1, same issue.

Actions #3

Updated by Peter Moreno over 12 years ago

Hi.

Running: 2.0-RC3 (i386) built on Sun Jul 31 05:05:32 EDT 2011.

The issue I see is that if I don't put the port # I want to use for anyterm the service won't start.

By default it say 8080, but won't start if u leave the port empty.

I try 250, 8080 and works, I just need it to add that port in my LAN rules to access the screen.

The issue I see is that, once u have the service running and if u press the button "Restart Service", the service won't restart, It will stop the service, them we have the "Start Service" button but doesn't work.

I went to the console and run:

/usr/local/etc/rc.d/anyterm.sh start

I got this:

No matching processes were found

/usr/local/etc/rc.d/anyterm.sh status

I got this:

anyterm is not running.

Totally stopped.

What I did is, return to the setup page: "Diagnostic" -> anyterm. My settings was there, port 8080, save the page and done, service back to business.

This is the issues I had seen today.

If u need more info about let me know please!!!

Actions #4

Updated by Chris Buechler over 9 years ago

  • Status changed from New to Closed

anyterm package no longer exists

Actions

Also available in: Atom PDF