Actions
Bug #12389
closedHelp text for RAM disk settings does not mention Captive Portal data
Start date:
Due date:
% Done:
100%
Estimated time:
Plus Target Version:
22.01
Release Notes:
Default
Affected Version:
Affected Architecture:
Description
Under System>Advanced>Miscellaneous -> RAM Disk Settings > Help text doesn't list captive portal data.
The current Help text:
Set this to use /tmp and /var as RAM disks (memory file system disks) on a full install rather than use the hard disk. Setting this will cause the data in /tmp and /var to be lost. RRD, DHCP leases and log directory will be retained. Changing this setting will cause the firewall to reboot after clicking "Save".
It should be:
Set this to use /tmp and /var as RAM disks (memory file system disks) on a full install rather than use the hard disk. Setting this will cause the data in /tmp and /var to be lost. RRD, DHCP leases, log directory, and Captive Portal Data will be retained. Changing this setting will cause the firewall to reboot after clicking "Save".
Updated by Jim Pingle over 3 years ago
- Subject changed from RAM Disk Settings Help text doesen't list Captive portal data. to Help text for RAM disk settings does not mention Captive Portal data
- Category changed from Operating System to Web Interface
- Target version changed from 2.6.0 to CE-Next
- Plus Target Version changed from 21.09 to 22.01
This can wait, it's not critical for it to be in this release.
Updated by Viktor Gurov about 3 years ago
Updated by Jim Pingle about 3 years ago
- Status changed from New to Pull Request Review
- Assignee set to Viktor Gurov
Updated by Viktor Gurov about 3 years ago
- Status changed from Pull Request Review to Feedback
- % Done changed from 0 to 100
Applied in changeset d9793efc0cb9d13aa812141ab509d288455f1f62.
Updated by Danilo Zrenjanin about 3 years ago
- Status changed from Feedback to Resolved
Tested on the:
2.6.0-DEVELOPMENT (amd64) built on Sat Oct 09 05:20:31 UTC 2021 FreeBSD 12.2-STABLE
It looks fine. Ticket resolved.
Updated by Jim Pingle about 3 years ago
- Target version changed from CE-Next to 2.6.0
Actions