Bug #1627
closed
VPN VOIP Traffic Ignoring Traffic Shaper Queues
0%
Description
I have a VPN setup for remote employees. The VOIP traffic usually goes to the VOIP queue between our PBX and the VOIP carrier as far as I can tell, but when the remote worker makes calls though the VPN, the traffic between the VPN Phone and our PBX goes to the default queue. We tried UDP 10000-20000, and TCP/UDP 10000-20000.
Files
Updated by Bipin Chandra about 14 years ago
is it this that ur referring to?
http://forum.pfsense.org/index.php/topic,36742.0.html
Updated by Chris Buechler about 14 years ago
- Priority changed from High to Normal
what version? what type of VPN?
Updated by Chris Buechler about 14 years ago
- Status changed from New to Feedback
Updated by Abdiel Marin about 14 years ago
- File config-corphq.eyemdemr.com-20110711211921.xml config-corphq.eyemdemr.com-20110711211921.xml added
- File VPNScreenShot.JPG VPNScreenShot.JPG added
2.0-RC2 (i386)
built on Fri Jun 10 21:40:17 EDT 2011
I added our config with ip's and keys changed, and a screenshot of the VPN settings for one of them.
Updated by Ermal Luçi about 14 years ago
What snapshot are you on?
There have been made some fixes lately to fix this can you please test?
By looking at the config i would sugest to tweak a little the Queue rules on the floating point rules.
Make them more specific or if your only intention is to shape voip the rule under ipsec is enough.
Updated by Hafiz Rafiyev about 14 years ago
Ermal great thanks for your fix,i had same problem(voip queue in ipsec vpn).After your last fix it's working just fine.Please do not touch shaper codes again:))
Updated by Ermal Luçi about 14 years ago
- Status changed from Feedback to Resolved