Project

General

Profile

Actions
Copy link

Bug #2769

closed

IPsec needs IPv4/IPv6 input validation

Added by Jim Pingle about 11 years ago. Updated about 11 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Renato Botelho
Category:
IPsec
Target version:
2.1
Start date:
01/22/2013
Due date:
% Done:

100%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.1-IPv6
Affected Architecture:

Description

IPsec GUI input validation needs some work for IPv6.

If you choose IPv4 or IPv6 on the Phase 1 settings, addresses of the incorrect family should be rejected in the peer address.

Similarly, addresses of the wrong type should be rejected in Phase 2 based on the "Tunnel IPv4" or "Tunnel IPv6" choice.

And if they cannot be mixed, selecting "IPv4" on Phase 1 should cause "Tunnel IPv6" to be rejected in Phase 2 and vice versa.

Actions
Copy link
 #1

Updated by Renato Botelho about 11 years ago

  • Assignee set to Renato Botelho
Actions
Copy link
 #2

Updated by Renato Botelho about 11 years ago

  • Status changed from New to Feedback
  • % Done changed from 0 to 100
Actions
Copy link
 #3

Updated by Renato Botelho about 11 years ago

  • Status changed from Feedback to Closed
Actions
Copy link

Also available in: Atom PDF