Project

General

Profile

Actions
Copy link

Bug #2788

closed

After a reboot the lan route have the false interface

Added by Andreas Huser almost 12 years ago. Updated over 9 years ago.

Status:
Rejected
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
02/01/2013
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
Affected Architecture:
amd64

Description

After Upgrading to the latest Beta1 Version the routing after reboot are a little bit confused.

My Environment (short):

I have two Interfaces:
em0 = WAN (dhcp)
em1 = LAN (10.143.0.0/24) IP: 10.143.0.254

In my network, the switch is the default gateway for lan devices. (10.143.0.252 vlan interface)
I have a secondery subnet 192.168.10.0/24 with the default gateway 192.168.10.254 (Switch vlan interface is a L3 Switch)

Issue:
i create a route on the pfsense 192.168.10.0/24 gw 10.143.0.252 interface em1 (lan_gw) all works fine when i ping from a host over the 192.168.10.0/24 network.
After a reboot the route are set to:
192.168.10.0/24 10.143.0.252 UGS 0 7581 "em0" <<< ? this is not correct! ist should be "em1"
i look at the xml config file all shows correct.
I could not find the cause, unfortunately

Regards
Andreas

Actions
Copy link

Also available in: Atom PDF