Added by Moula BADJI almost 12 years ago. Updated over 11 years ago.
0%
Description
DHCPD don't start. It try to start it but it not possible. tank's
Message : Disabling DHCPD...pgrep: Invalid pid in file '/var/dhcpd/var/run/dhcpd.pid'
Updated by Renato Botelho almost 12 years ago
Could you please post here the content of /var/dhcpd/var/run/dhcpd.pid?
Updated by Renato Botelho almost 12 years ago
Updated by Moula BADJI almost 12 years ago
vi /var/dhcpd/var/run/dhcpd.pid :
ov-uu4
thank's
Updated by Renato Botelho almost 12 years ago
That is something really strange since dhcpd is the responsible to sabe pid there.
Could you please try to kill any dhcpd process that is running, then remove /var/dhcpd/var/run/dhcpd.pid and try again?
Updated by Moula BADJI almost 12 years ago
Hello,
Ihave the same problème .
Do you want to enable the DHCP server on LAN? [y|n] y
Enter the start address of the IPv4 client address range: 192.168.100.150
Enter the end address of the IPv4 client address range: 192.168.100.250
Disabling DHCPD...pgrep: Invalid pid in file `/var/dhcpd/var/run/dhcpd.pid'
Done!
Please wait while the changes are saved to LAN... Reloading filter...
DHCPD...pgrep: Invalid pid in file `/var/dhcpd/var/run/dhcpd.pid'
The IPv4 LAN address has been set to 192.168.100.252/24
You can now access the webConfigurator by opening the following URL in your web browser:
http://192.168.100.252/
Press <ENTER> to continue.
Thank's
Updated by Renato Botelho almost 12 years ago
Are you using a recent snapshot?
Does this problem happen only when you configure it or during the boot too?
Is dhcpd running after the error happen?
Is there error messages on /var/log/dhcpd.log?
Updated by Renato Botelho over 11 years ago
It's not reproducible, seems to be a local issue instead of a bug on pfSense. Please try to find help in forums and/or mailing lists.