Project

General

Profile

Actions
Copy link

Bug #2918

closed

ntpd doesn't sync if not bound to any interface

Added by Øyvind Hvidsten about 11 years ago. Updated about 11 years ago.

Status:
Rejected
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
04/01/2013
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Affected Version:
2.0.x
Affected Plus Version:
Affected Architecture:

Description

When no interfaces are selected under Services=>NTP, in attempt to use NTP only for timekeeping on the server itself, ntpd does not successfully sync with the time server.

ntpq -p
remote refid st t when poll reach delay offset jitter ==============================================================================
tyldum.com .INIT. 16 - - 64 0 0.000 0.000 0.000

This command was run 24 hours after ntpd was started - it's definitely not going to sync.

Selecting one or more interfaces to listen to, and it looks like this after 10 minutes:
ntpq -p
remote refid st t when poll reach delay offset jitter ==============================================================================
*tyldum.com 192.38.7.240 2 u 1 64 1 53.866 22.635 15.528

Actions
Copy link
 #1

Updated by Renato Botelho about 11 years ago

  • Status changed from New to Rejected

I tried to reproduce on 3 different installations without success, ntpd worked as expected selecting one, more than one or no interface. Please use the forum to discuss/diagnose and back to bug tracker if it's a confirmed bug.

Actions
Copy link

Also available in: Atom PDF