Project

General

Profile

Actions

Bug #3184

closed

DHCPv6 failover configuration is broken

Added by Jim Pingle about 8 years ago. Updated about 8 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
Category:
DHCP (IPv6)
Target version:
Start date:
09/06/2013
Due date:
% Done:

100%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.1
Affected Architecture:

Description

See http://forum.pfsense.org/index.php/topic,66093.0/topicseen.html

Failover causes a bad config for the dhcpv6 daemon:

Sep 6 17:13:35     php: /xmlrpc.php: The command '/usr/local/sbin/dhcpd -6 -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpdv6.conf -pf /var/run/dhcpdv6.pid em1' returned exit code '1', the output was 'Internet Systems Consortium DHCP Server 4.2.5-P1 Copyright 2004-2013 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ /etc/dhcpdv6.conf line 15: expecting allow/deny key deny dynamic ^ /etc/dhcpdv6.conf line 15: expecting a parameter or declaration deny dynamic bootp clients; ^ Configuration file errors encountered -- exiting If you did not get this software from ftp.isc.org, please get the latest from ftp.isc.org and install that before requesting help. If you did get this software from ftp.isc.org and have not yet read the README, please read it before requesting help. If you intend to request help from the dhcp-server@isc.org mailing list, please read the section on the

Actions #1

Updated by Jim Pingle about 8 years ago

  • Status changed from New to Feedback
  • % Done changed from 0 to 100
Actions #2

Updated by Jim Pingle about 8 years ago

Actions #3

Updated by Chris Buechler about 8 years ago

  • Status changed from Feedback to Resolved
Actions

Also available in: Atom PDF