Project

General

Profile

Actions

Bug #3299

closed

Missing storage driver

Added by Oliver Loch over 8 years ago. Updated almost 7 years ago.

Status:
Rejected
Priority:
High
Assignee:
-
Category:
Operating System
Target version:
-
Start date:
10/31/2013
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.1
Affected Architecture:

Description

Hi,

just upgpraded today from 2.0.3 to the 2.1 version and after 20 minutes of waiting I connected a monitor to see a waiting prompt asking for my harddrive but it was gone.

Investigating the issue a bit further and it turned out that the storage driver is missing for this system.

It's a "whole Intel" Atom box, so everything is from Intel.

pciconfig -lvbc

===== >8 ======= SNIP ==========================

hostb0@pci0:0:0:0: class=0x060000 card=0x0d77105b chip=0xa0008086 rev=0x02 hdr=0x00
class = bridge
subclass = HOST-PCI
cap 09[e0] = vendor (length 8) Intel cap 12 version 1
vgapci0@pci0:0:2:0: class=0x030000 card=0x0d77105b chip=0xa0018086 rev=0x02 hdr=0x00
class = display
subclass = VGA
bar [10] = type Memory, range 32, base 0xfea80000, size 524288, enabled
bar [14] = type I/O Port, range 32, base 0xdc00, size 8, enabled
bar [18] = type Prefetchable Memory, range 32, base 0xd0000000, size 268435456, enabled
bar [1c] = type Memory, range 32, base 0xfeb00000, size 1048576, enabled
cap 0590 = MSI supports 1 message
cap 01[d0] = powerspec 2 supports D0 D3 current D0
vgapci1@pci0:0:2:1: class=0x038000 card=0x0d77105b chip=0xa0028086 rev=0x02 hdr=0x00
class = display
bar [10] = type Memory, range 32, base 0xfea00000, size 524288, enabled
cap 01[d0] = powerspec 2 supports D0 D3 current D0
pcib1@pci0:0:28:0: class=0x060400 card=0x0d77105b chip=0x27d08086 rev=0x02 hdr=0x01
class = bridge
subclass = PCI-PCI
cap 1040 = PCI-Express 1 root port max data 128(128) link x0(x1)
cap 0580 = MSI supports 1 message
cap 0d90 = PCI Bridge card=0x0d77105b
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib2@pci0:0:28:2: class=0x060400 card=0x0d77105b chip=0x27d48086 rev=0x02 hdr=0x01
class = bridge
subclass = PCI-PCI
cap 1040 = PCI-Express 1 root port max data 128(128) link x1(x1)
cap 0580 = MSI supports 1 message
cap 0d90 = PCI Bridge card=0x0d77105b
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib3@pci0:0:28:3: class=0x060400 card=0x0d77105b chip=0x27d68086 rev=0x02 hdr=0x01
class = bridge
subclass = PCI-PCI
cap 1040 = PCI-Express 1 root port max data 128(128) link x1(x1)
cap 0580 = MSI supports 1 message
cap 0d90 = PCI Bridge card=0x0d77105b
cap 01[a0] = powerspec 2 supports D0 D3 current D0
uhci0@pci0:0:29:0: class=0x0c0300 card=0x0d77105b chip=0x27c88086 rev=0x02 hdr=0x00
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0xd880, size 32, enabled
uhci1@pci0:0:29:1: class=0x0c0300 card=0x0d77105b chip=0x27c98086 rev=0x02 hdr=0x00
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0xd800, size 32, enabled
uhci2@pci0:0:29:2: class=0x0c0300 card=0x0d77105b chip=0x27ca8086 rev=0x02 hdr=0x00
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0xd480, size 32, enabled
uhci3@pci0:0:29:3: class=0x0c0300 card=0x0d77105b chip=0x27cb8086 rev=0x02 hdr=0x00
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0xd400, size 32, enabled
ehci0@pci0:0:29:7: class=0x0c0320 card=0x0d77105b chip=0x27cc8086 rev=0x02 hdr=0x00
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfe9ffc00, size 1024, enabled
cap 0150 = powerspec 2 supports D0 D3 current D0
cap 0a58 = EHCI Debug Port at offset 0xa0 in map 0x14
pcib4@pci0:0:30:0: class=0x060401 card=0x0d77105b chip=0x24488086 rev=0xe2 hdr=0x01
class = bridge
subclass = PCI-PCI
cap 0d50 = PCI Bridge card=0x0d77105b
isab0@pci0:0:31:0: class=0x060100 card=0x0d77105b chip=0x27bc8086 rev=0x02 hdr=0x00
class = bridge
subclass = PCI-ISA
cap 09[e0] = vendor (length 12) Intel cap 1 version 0
features: Quick Resume, SATA RAID-5, Mobile, 6 PCI-e x1 slots, SATA RAID-0/1/10
atapci0@pci0:0:31:2: class=0x01018a card=0x0d77105b chip=0x27c08086 rev=0x02 hdr=0x00
class = mass storage
subclass = ATA
bar [10] = type I/O Port, range 32, base 0x1f0, size 8, enabled
bar [14] = type I/O Port, range 32, base 0x3f4, size 1, enabled
bar [18] = type I/O Port, range 32, base 0x170, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0x374, size 1, enabled
bar [20] = type I/O Port, range 32, base 0xff90, size 16, enabled
cap 0170 = powerspec 2 supports D0 D3 current D0
none0@pci0:0:31:3: class=0x0c0500 card=0x0d77105b chip=0x27da8086 rev=0x02 hdr=0x00
class = serial bus
subclass = SMBus
bar [20] = type I/O Port, range 32, base 0x400, size 32, enabled
re0@pci0:2:0:0: class=0x020000 card=0x0d77105b chip=0x816810ec rev=0x06 hdr=0x00
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0xe800, size 256, enabled
bar [18] = type Prefetchable Memory, range 64, base 0xfcffb000, size 4096, enabled
bar [20] = type Prefetchable Memory, range 64, base 0xfcffc000, size 16384, enabled
cap 0140 = powerspec 3 supports D0 D1 D2 D3 current D0
cap 0550 = MSI supports 1 message, 64 bit enabled with 1 message
cap 1070 = PCI-Express 2 endpoint IRQ 2 max data 128(256) link x1(x1)
cap 11[b0] = MSI-X supports 4 messages in map 0x20
cap 03[d0] = VPD
none1@pci0:3:0:0: class=0x048000 card=0x0d77105b chip=0x161514e4 rev=0x00 hdr=0x00
class = multimedia
bar [10] = type Memory, range 64, base 0xfdff0000, size 65536, enabled
bar [18] = type Memory, range 64, base 0xfe000000, size 8388608, enabled
cap 0148 = powerspec 3 supports D0 D3 current D0
cap 0960 = vendor (length 108)
cap 0550 = MSI supports 1 message, 64 bit
cap 10[cc] = PCI-Express 2 endpoint max data 128(128) link x1(x1)

====== SNAP ========== 8< ===================

Capture of system.log from boot up:

======== SNIP =========== 8< ================

Oct 31 22:26:54 router kernel: Copyright (c) 1992-2010 The FreeBSD Project.
Oct 31 22:26:54 router kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Oct 31 22:26:54 router kernel: The Regents of the University of California. All rights reserved.
Oct 31 22:26:54 router kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Oct 31 22:26:54 router kernel: FreeBSD 8.1-RELEASE-p13 #0: Fri Apr 12 10:54:59 EDT 2013
Oct 31 22:26:54 router kernel: root@snapshots-8_1-amd64.builders.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
Oct 31 22:26:54 router kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Oct 31 22:26:54 router kernel: CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1807.21-MHz K8-class CPU)
Oct 31 22:26:54 router kernel: Origin = "GenuineIntel" Id = 0x106ca Family = 6 Model = 1c Stepping = 10
Oct 31 22:26:54 router kernel: Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Oct 31 22:26:54 router kernel: Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
Oct 31 22:26:54 router kernel: AMD Features=0x20100800<SYSCALL,NX,LM>
Oct 31 22:26:54 router kernel: AMD Features2=0x1<LAHF>
Oct 31 22:26:54 router kernel: TSC: P-state invariant
Oct 31 22:26:54 router kernel: real memory = 4294967296 (4096 MB)
Oct 31 22:26:54 router kernel: avail memory = 4085374976 (3896 MB)
Oct 31 22:26:54 router kernel: ACPI APIC Table: <012811 APIC0954>
Oct 31 22:26:54 router kernel: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Oct 31 22:26:54 router kernel: FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads
Oct 31 22:26:54 router kernel: cpu0 (BSP): APIC ID: 0
Oct 31 22:26:54 router kernel: cpu1 (AP/HT): APIC ID: 1
Oct 31 22:26:54 router kernel: cpu2 (AP): APIC ID: 2
Oct 31 22:26:54 router kernel: cpu3 (AP/HT): APIC ID: 3
Oct 31 22:26:54 router kernel: ioapic0: Changing APIC ID to 4
Oct 31 22:26:54 router kernel: ioapic0 <Version 2.0> irqs 0-23 on motherboard
Oct 31 22:26:54 router kernel: wlan: mac acl policy registered
Oct 31 22:26:54 router kernel: ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
Oct 31 22:26:54 router kernel: ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Oct 31 22:26:54 router kernel: module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff804732e0, 0) error 1
Oct 31 22:26:54 router kernel: wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
Oct 31 22:26:54 router kernel: wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
Oct 31 22:26:54 router kernel: module_register_init: MOD_LOAD (wpi_fw, 0xffffffff80656da0, 0) error 1
Oct 31 22:26:54 router kernel: ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
Oct 31 22:26:54 router kernel: ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Oct 31 22:26:54 router kernel: module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff804731a0, 0) error 1
Oct 31 22:26:54 router kernel: ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
Oct 31 22:26:54 router kernel: ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Oct 31 22:26:54 router kernel: module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80473240, 0) error 1
Oct 31 22:26:54 router kernel: kbd1 at kbdmux0
Oct 31 22:26:54 router kernel: cryptosoft0: <software crypto> on motherboard
Oct 31 22:26:54 router kernel: padlock0: No ACE support.
Oct 31 22:26:54 router kernel: acpi0: <012811 RSDT0954> on motherboard
Oct 31 22:26:54 router kernel: acpi0: [ITHREAD]
Oct 31 22:26:54 router kernel: acpi0: Power Button (fixed)
Oct 31 22:26:54 router kernel: acpi0: reservation of fee00000, 1000 (3) failed
Oct 31 22:26:54 router kernel: acpi0: reservation of 0, a0000 (3) failed
Oct 31 22:26:54 router kernel: acpi0: reservation of 100000, bf600000 (3) failed
Oct 31 22:26:54 router kernel: Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
Oct 31 22:26:54 router kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
Oct 31 22:26:54 router kernel: cpu0: <ACPI CPU> on acpi0
Oct 31 22:26:54 router kernel: cpu1: <ACPI CPU> on acpi0
Oct 31 22:26:54 router kernel: cpu2: <ACPI CPU> on acpi0
Oct 31 22:26:54 router kernel: cpu3: <ACPI CPU> on acpi0
Oct 31 22:26:54 router kernel: acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Oct 31 22:26:54 router kernel: Timecounter "HPET" frequency 14318180 Hz quality 900
Oct 31 22:26:54 router kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Oct 31 22:26:54 router kernel: pci0: <ACPI PCI bus> on pcib0
Oct 31 22:26:54 router kernel: vgapci0: <VGA-compatible display> port 0xdc00-0xdc07 mem 0xfea80000-0xfeafffff,0xd0000000-0xdfffffff,0xfeb00000-0xfebfffff irq 16 at device 2.0 on pci0
Oct 31 22:26:54 router kernel: agp0: <Intel Pineview SVGA controller> on vgapci0
Oct 31 22:26:54 router kernel: agp0: detected 8188k stolen memory
Oct 31 22:26:54 router kernel: agp0: aperture size is 256M
Oct 31 22:26:54 router kernel: vgapci1: <VGA-compatible display> mem 0xfea00000-0xfea7ffff at device 2.1 on pci0
Oct 31 22:26:54 router kernel: pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
Oct 31 22:26:54 router kernel: pci1: <ACPI PCI bus> on pcib1
Oct 31 22:26:54 router kernel: pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
Oct 31 22:26:54 router kernel: pci2: <ACPI PCI bus> on pcib2
Oct 31 22:26:54 router kernel: re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfcffb000-0xfcffbfff,0xfcffc000-0xfcffffff irq 18 at device 0.0 on pci2
Oct 31 22:26:54 router kernel: re0: Using 1 MSI messages
Oct 31 22:26:54 router kernel: re0: Chip rev. 0x2c000000
Oct 31 22:26:54 router kernel: re0: MAC rev. 0x00000000
Oct 31 22:26:54 router kernel: miibus0: <MII bus> on re0
Oct 31 22:26:54 router kernel: rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
Oct 31 22:26:54 router kernel: rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Oct 31 22:26:54 router kernel: re0: [FILTER]
Oct 31 22:26:54 router kernel: pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
Oct 31 22:26:54 router kernel: pci3: <ACPI PCI bus> on pcib3
Oct 31 22:26:54 router kernel: pci3: <multimedia> at device 0.0 (no driver attached)
Oct 31 22:26:54 router kernel: uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xd880-0xd89f irq 23 at device 29.0 on pci0
Oct 31 22:26:54 router kernel: uhci0: [ITHREAD]
Oct 31 22:26:54 router kernel: uhci0: LegSup = 0x2f00
Oct 31 22:26:54 router kernel: usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
Oct 31 22:26:54 router kernel: uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xd800-0xd81f irq 19 at device 29.1 on pci0
Oct 31 22:26:54 router kernel: uhci1: [ITHREAD]
Oct 31 22:26:54 router kernel: uhci1: LegSup = 0x2f00
Oct 31 22:26:54 router kernel: usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
Oct 31 22:26:54 router kernel: uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xd480-0xd49f irq 18 at device 29.2 on pci0
Oct 31 22:26:54 router kernel: uhci2: [ITHREAD]
Oct 31 22:26:54 router kernel: uhci2: LegSup = 0x2f00
Oct 31 22:26:54 router kernel: usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
Oct 31 22:26:54 router kernel: uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xd400-0xd41f irq 16 at device 29.3 on pci0
Oct 31 22:26:54 router kernel: uhci3: [ITHREAD]
Oct 31 22:26:54 router kernel: uhci3: LegSup = 0x2f00
Oct 31 22:26:54 router kernel: usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
Oct 31 22:26:54 router kernel: ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe9ffc00-0xfe9fffff irq 23 at device 29.7 on pci0
Oct 31 22:26:54 router kernel: ehci0: [ITHREAD]
Oct 31 22:26:54 router kernel: usbus4: EHCI version 1.0
Oct 31 22:26:54 router kernel: usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
Oct 31 22:26:54 router kernel: pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
Oct 31 22:26:54 router kernel: pci4: <ACPI PCI bus> on pcib4
Oct 31 22:26:54 router kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Oct 31 22:26:54 router kernel: isa0: <ISA bus> on isab0
Oct 31 22:26:54 router kernel: atapci0: <Intel ICH7 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff90-0xff9f at device 31.2 on pci0
Oct 31 22:26:54 router kernel: ata0: <ATA channel 0> on atapci0
Oct 31 22:26:54 router kernel: ata0: [ITHREAD]
Oct 31 22:26:54 router kernel: ata1: <ATA channel 1> on atapci0
Oct 31 22:26:54 router kernel: ata1: [ITHREAD]
Oct 31 22:26:54 router kernel: pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
Oct 31 22:26:54 router kernel: acpi_button0: <Power Button> on acpi0
Oct 31 22:26:54 router kernel: atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Oct 31 22:26:54 router kernel: atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
Oct 31 22:26:54 router kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Oct 31 22:26:54 router kernel: kbd0 at atkbd0
Oct 31 22:26:54 router kernel: atkbd0: [GIANT-LOCKED]
Oct 31 22:26:54 router kernel: atkbd0: [ITHREAD]
Oct 31 22:26:54 router kernel: orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
Oct 31 22:26:54 router kernel: sc0: <System console> at flags 0x100 on isa0
Oct 31 22:26:54 router kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Oct 31 22:26:54 router kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Oct 31 22:26:54 router kernel: ppc0: cannot reserve I/O port range
Oct 31 22:26:54 router kernel: p4tcc0: <CPU Frequency Thermal Control> on cpu0
Oct 31 22:26:54 router kernel: p4tcc1: <CPU Frequency Thermal Control> on cpu1
Oct 31 22:26:54 router kernel: p4tcc2: <CPU Frequency Thermal Control> on cpu2
Oct 31 22:26:54 router kernel: p4tcc3: <CPU Frequency Thermal Control> on cpu3
Oct 31 22:26:54 router kernel: Timecounters tick every 1.000 msec
Oct 31 22:26:54 router kernel: IPsec: Initialized Security Association Processing.
Oct 31 22:26:54 router kernel: usbus0: 12Mbps Full Speed USB v1.0
Oct 31 22:26:54 router kernel: usbus1: 12Mbps Full Speed USB v1.0
Oct 31 22:26:54 router kernel: usbus2: 12Mbps Full Speed USB v1.0
Oct 31 22:26:54 router kernel: usbus3: 12Mbps Full Speed USB v1.0
Oct 31 22:26:54 router kernel: usbus4: 480Mbps High Speed USB v2.0
Oct 31 22:26:54 router kernel: ad0: 152627MB <HITACHI HTS723216L9SA60 FC2ZC50A> at ata0-master UDMA100 SATA
Oct 31 22:26:54 router kernel: ugen0.1: <Intel> at usbus0
Oct 31 22:26:54 router kernel: uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Oct 31 22:26:54 router kernel: ugen1.1: <Intel> at usbus1
Oct 31 22:26:54 router kernel: uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Oct 31 22:26:54 router kernel: ugen2.1: <Intel> at usbus2
Oct 31 22:26:54 router kernel: uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
Oct 31 22:26:54 router kernel: ugen3.1: <Intel> at usbus3
Oct 31 22:26:54 router kernel: uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
Oct 31 22:26:54 router kernel: ugen4.1: <Intel> at usbus4
Oct 31 22:26:54 router kernel: uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
Oct 31 22:26:54 router kernel: uhub0: 2 ports with 2 removable, self powered
Oct 31 22:26:54 router kernel: uhub1: 2 ports with 2 removable, self powered
Oct 31 22:26:54 router kernel: uhub2: 2 ports with 2 removable, self powered
Oct 31 22:26:54 router kernel: uhub3: 2 ports with 2 removable, self powered
Oct 31 22:26:54 router kernel: uhub4: 8 ports with 8 removable, self powered
Oct 31 22:26:54 router kernel: ugen4.2: <Generic> at usbus4
Oct 31 22:26:54 router kernel: umass0: <Bulk-In, Bulk-Out, Interface> on usbus4
Oct 31 22:26:54 router kernel: umass0: SCSI over Bulk-Only; quirks = 0x0000
Oct 31 22:26:54 router kernel: ugen2.2: <Logitech> at usbus2
Oct 31 22:26:54 router kernel: ukbd0: <USB Keyboard> on usbus2
Oct 31 22:26:54 router kernel: kbd2 at ukbd0
Oct 31 22:26:54 router kernel: uhid0: <USB Keyboard> on usbus2
Oct 31 22:26:54 router kernel: umass0:0:0:-1: Attached to scbus0
Oct 31 22:26:54 router kernel: (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
Oct 31 22:26:54 router kernel: (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
Oct 31 22:26:54 router kernel: (probe0:umass-sim0:0:0:0): SCSI status: Check Condition
Oct 31 22:26:54 router kernel: (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
Oct 31 22:26:54 router kernel: SMP: AP CPU #1 Launched!
Oct 31 22:26:54 router kernel: da0 at umass-sim0 bus 0 scbus0 target 0 lun 0SMP: AP CPU #3 Launched!
Oct 31 22:26:54 router kernel: da0:
Oct 31 22:26:54 router kernel: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device
Oct 31 22:26:54 router kernel: da0: 40.000MB/s transfers
Oct 31 22:26:54 router kernel: da0: Attempt to query device size failed: NOT READY, Medium not present
Oct 31 22:26:54 router kernel: SMP: AP CPU #2 Launched!
Oct 31 22:26:54 router kernel: Trying to mount root from ufs:/dev/ad0s1a
Oct 31 22:26:54 router kernel: pflog0: promiscuous mode enabled

==== >8 ================== SNAP ==========

The scsi error you see is created by the internal card reader that is builtin into the machine.

If you have questions feel free to contact me.

KR,

Oliver

Actions #1

Updated by Oliver Loch over 8 years ago

Ah, not that you think the drive is there, what's he talking about: The logs are from the 2.0.3 version.

Actions #2

Updated by Chris Buechler over 8 years ago

  • Status changed from New to Rejected

We include all drivers available in the base OS version being used. That's some hardware-specific regression that we can't do anything about.
https://doc.pfsense.org/index.php/Policy_on_FreeBSD_issues

Actions #3

Updated by Chris Buechler almost 7 years ago

  • Target version deleted (2.1.1)
Actions

Also available in: Atom PDF