Project

General

Profile

Actions

Bug #3299

closed

Missing storage driver

Added by Oliver Loch over 10 years ago. Updated over 8 years ago.

Status:
Rejected
Priority:
High
Assignee:
-
Category:
Operating System
Target version:
-
Start date:
10/31/2013
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.1
Affected Architecture:

Description

Hi,

just upgpraded today from 2.0.3 to the 2.1 version and after 20 minutes of waiting I connected a monitor to see a waiting prompt asking for my harddrive but it was gone.

Investigating the issue a bit further and it turned out that the storage driver is missing for this system.

It's a "whole Intel" Atom box, so everything is from Intel.

pciconfig -lvbc

===== >8 ======= SNIP ==========================

hostb0@pci0:0:0:0: class=0x060000 card=0x0d77105b chip=0xa0008086 rev=0x02 hdr=0x00
class = bridge
subclass = HOST-PCI
cap 09[e0] = vendor (length 8) Intel cap 12 version 1
vgapci0@pci0:0:2:0: class=0x030000 card=0x0d77105b chip=0xa0018086 rev=0x02 hdr=0x00
class = display
subclass = VGA
bar [10] = type Memory, range 32, base 0xfea80000, size 524288, enabled
bar [14] = type I/O Port, range 32, base 0xdc00, size 8, enabled
bar [18] = type Prefetchable Memory, range 32, base 0xd0000000, size 268435456, enabled
bar [1c] = type Memory, range 32, base 0xfeb00000, size 1048576, enabled
cap 0590 = MSI supports 1 message
cap 01[d0] = powerspec 2 supports D0 D3 current D0
vgapci1@pci0:0:2:1: class=0x038000 card=0x0d77105b chip=0xa0028086 rev=0x02 hdr=0x00
class = display
bar [10] = type Memory, range 32, base 0xfea00000, size 524288, enabled
cap 01[d0] = powerspec 2 supports D0 D3 current D0
pcib1@pci0:0:28:0: class=0x060400 card=0x0d77105b chip=0x27d08086 rev=0x02 hdr=0x01
class = bridge
subclass = PCI-PCI
cap 1040 = PCI-Express 1 root port max data 128(128) link x0(x1)
cap 0580 = MSI supports 1 message
cap 0d90 = PCI Bridge card=0x0d77105b
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib2@pci0:0:28:2: class=0x060400 card=0x0d77105b chip=0x27d48086 rev=0x02 hdr=0x01
class = bridge
subclass = PCI-PCI
cap 1040 = PCI-Express 1 root port max data 128(128) link x1(x1)
cap 0580 = MSI supports 1 message
cap 0d90 = PCI Bridge card=0x0d77105b
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib3@pci0:0:28:3: class=0x060400 card=0x0d77105b chip=0x27d68086 rev=0x02 hdr=0x01
class = bridge
subclass = PCI-PCI
cap 1040 = PCI-Express 1 root port max data 128(128) link x1(x1)
cap 0580 = MSI supports 1 message
cap 0d90 = PCI Bridge card=0x0d77105b
cap 01[a0] = powerspec 2 supports D0 D3 current D0
uhci0@pci0:0:29:0: class=0x0c0300 card=0x0d77105b chip=0x27c88086 rev=0x02 hdr=0x00
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0xd880, size 32, enabled
uhci1@pci0:0:29:1: class=0x0c0300 card=0x0d77105b chip=0x27c98086 rev=0x02 hdr=0x00
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0xd800, size 32, enabled
uhci2@pci0:0:29:2: class=0x0c0300 card=0x0d77105b chip=0x27ca8086 rev=0x02 hdr=0x00
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0xd480, size 32, enabled
uhci3@pci0:0:29:3: class=0x0c0300 card=0x0d77105b chip=0x27cb8086 rev=0x02 hdr=0x00
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0xd400, size 32, enabled
ehci0@pci0:0:29:7: class=0x0c0320 card=0x0d77105b chip=0x27cc8086 rev=0x02 hdr=0x00
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfe9ffc00, size 1024, enabled
cap 0150 = powerspec 2 supports D0 D3 current D0
cap 0a58 = EHCI Debug Port at offset 0xa0 in map 0x14
pcib4@pci0:0:30:0: class=0x060401 card=0x0d77105b chip=0x24488086 rev=0xe2 hdr=0x01
class = bridge
subclass = PCI-PCI
cap 0d50 = PCI Bridge card=0x0d77105b
isab0@pci0:0:31:0: class=0x060100 card=0x0d77105b chip=0x27bc8086 rev=0x02 hdr=0x00
class = bridge
subclass = PCI-ISA
cap 09[e0] = vendor (length 12) Intel cap 1 version 0
features: Quick Resume, SATA RAID-5, Mobile, 6 PCI-e x1 slots, SATA RAID-0/1/10
atapci0@pci0:0:31:2: class=0x01018a card=0x0d77105b chip=0x27c08086 rev=0x02 hdr=0x00
class = mass storage
subclass = ATA
bar [10] = type I/O Port, range 32, base 0x1f0, size 8, enabled
bar [14] = type I/O Port, range 32, base 0x3f4, size 1, enabled
bar [18] = type I/O Port, range 32, base 0x170, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0x374, size 1, enabled
bar [20] = type I/O Port, range 32, base 0xff90, size 16, enabled
cap 0170 = powerspec 2 supports D0 D3 current D0
none0@pci0:0:31:3: class=0x0c0500 card=0x0d77105b chip=0x27da8086 rev=0x02 hdr=0x00
class = serial bus
subclass = SMBus
bar [20] = type I/O Port, range 32, base 0x400, size 32, enabled
re0@pci0:2:0:0: class=0x020000 card=0x0d77105b chip=0x816810ec rev=0x06 hdr=0x00
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0xe800, size 256, enabled
bar [18] = type Prefetchable Memory, range 64, base 0xfcffb000, size 4096, enabled
bar [20] = type Prefetchable Memory, range 64, base 0xfcffc000, size 16384, enabled
cap 0140 = powerspec 3 supports D0 D1 D2 D3 current D0
cap 0550 = MSI supports 1 message, 64 bit enabled with 1 message
cap 1070 = PCI-Express 2 endpoint IRQ 2 max data 128(256) link x1(x1)
cap 11[b0] = MSI-X supports 4 messages in map 0x20
cap 03[d0] = VPD
none1@pci0:3:0:0: class=0x048000 card=0x0d77105b chip=0x161514e4 rev=0x00 hdr=0x00
class = multimedia
bar [10] = type Memory, range 64, base 0xfdff0000, size 65536, enabled
bar [18] = type Memory, range 64, base 0xfe000000, size 8388608, enabled
cap 0148 = powerspec 3 supports D0 D3 current D0
cap 0960 = vendor (length 108)
cap 0550 = MSI supports 1 message, 64 bit
cap 10[cc] = PCI-Express 2 endpoint max data 128(128) link x1(x1)

====== SNAP ========== 8< ===================

Capture of system.log from boot up:

======== SNIP =========== 8< ================

Oct 31 22:26:54 router kernel: Copyright (c) 1992-2010 The FreeBSD Project.
Oct 31 22:26:54 router kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Oct 31 22:26:54 router kernel: The Regents of the University of California. All rights reserved.
Oct 31 22:26:54 router kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Oct 31 22:26:54 router kernel: FreeBSD 8.1-RELEASE-p13 #0: Fri Apr 12 10:54:59 EDT 2013
Oct 31 22:26:54 router kernel: root@snapshots-8_1-amd64.builders.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
Oct 31 22:26:54 router kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Oct 31 22:26:54 router kernel: CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1807.21-MHz K8-class CPU)
Oct 31 22:26:54 router kernel: Origin = "GenuineIntel" Id = 0x106ca Family = 6 Model = 1c Stepping = 10
Oct 31 22:26:54 router kernel: Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Oct 31 22:26:54 router kernel: Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
Oct 31 22:26:54 router kernel: AMD Features=0x20100800<SYSCALL,NX,LM>
Oct 31 22:26:54 router kernel: AMD Features2=0x1<LAHF>
Oct 31 22:26:54 router kernel: TSC: P-state invariant
Oct 31 22:26:54 router kernel: real memory = 4294967296 (4096 MB)
Oct 31 22:26:54 router kernel: avail memory = 4085374976 (3896 MB)
Oct 31 22:26:54 router kernel: ACPI APIC Table: <012811 APIC0954>
Oct 31 22:26:54 router kernel: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Oct 31 22:26:54 router kernel: FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads
Oct 31 22:26:54 router kernel: cpu0 (BSP): APIC ID: 0
Oct 31 22:26:54 router kernel: cpu1 (AP/HT): APIC ID: 1
Oct 31 22:26:54 router kernel: cpu2 (AP): APIC ID: 2
Oct 31 22:26:54 router kernel: cpu3 (AP/HT): APIC ID: 3
Oct 31 22:26:54 router kernel: ioapic0: Changing APIC ID to 4
Oct 31 22:26:54 router kernel: ioapic0 <Version 2.0> irqs 0-23 on motherboard
Oct 31 22:26:54 router kernel: wlan: mac acl policy registered
Oct 31 22:26:54 router kernel: ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
Oct 31 22:26:54 router kernel: ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Oct 31 22:26:54 router kernel: module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff804732e0, 0) error 1
Oct 31 22:26:54 router kernel: wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
Oct 31 22:26:54 router kernel: wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
Oct 31 22:26:54 router kernel: module_register_init: MOD_LOAD (wpi_fw, 0xffffffff80656da0, 0) error 1
Oct 31 22:26:54 router kernel: ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
Oct 31 22:26:54 router kernel: ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Oct 31 22:26:54 router kernel: module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff804731a0, 0) error 1
Oct 31 22:26:54 router kernel: ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
Oct 31 22:26:54 router kernel: ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Oct 31 22:26:54 router kernel: module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80473240, 0) error 1
Oct 31 22:26:54 router kernel: kbd1 at kbdmux0
Oct 31 22:26:54 router kernel: cryptosoft0: <software crypto> on motherboard
Oct 31 22:26:54 router kernel: padlock0: No ACE support.
Oct 31 22:26:54 router kernel: acpi0: <012811 RSDT0954> on motherboard
Oct 31 22:26:54 router kernel: acpi0: [ITHREAD]
Oct 31 22:26:54 router kernel: acpi0: Power Button (fixed)
Oct 31 22:26:54 router kernel: acpi0: reservation of fee00000, 1000 (3) failed
Oct 31 22:26:54 router kernel: acpi0: reservation of 0, a0000 (3) failed
Oct 31 22:26:54 router kernel: acpi0: reservation of 100000, bf600000 (3) failed
Oct 31 22:26:54 router kernel: Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
Oct 31 22:26:54 router kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
Oct 31 22:26:54 router kernel: cpu0: <ACPI CPU> on acpi0
Oct 31 22:26:54 router kernel: cpu1: <ACPI CPU> on acpi0
Oct 31 22:26:54 router kernel: cpu2: <ACPI CPU> on acpi0
Oct 31 22:26:54 router kernel: cpu3: <ACPI CPU> on acpi0
Oct 31 22:26:54 router kernel: acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Oct 31 22:26:54 router kernel: Timecounter "HPET" frequency 14318180 Hz quality 900
Oct 31 22:26:54 router kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Oct 31 22:26:54 router kernel: pci0: <ACPI PCI bus> on pcib0
Oct 31 22:26:54 router kernel: vgapci0: <VGA-compatible display> port 0xdc00-0xdc07 mem 0xfea80000-0xfeafffff,0xd0000000-0xdfffffff,0xfeb00000-0xfebfffff irq 16 at device 2.0 on pci0
Oct 31 22:26:54 router kernel: agp0: <Intel Pineview SVGA controller> on vgapci0
Oct 31 22:26:54 router kernel: agp0: detected 8188k stolen memory
Oct 31 22:26:54 router kernel: agp0: aperture size is 256M
Oct 31 22:26:54 router kernel: vgapci1: <VGA-compatible display> mem 0xfea00000-0xfea7ffff at device 2.1 on pci0
Oct 31 22:26:54 router kernel: pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
Oct 31 22:26:54 router kernel: pci1: <ACPI PCI bus> on pcib1
Oct 31 22:26:54 router kernel: pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
Oct 31 22:26:54 router kernel: pci2: <ACPI PCI bus> on pcib2
Oct 31 22:26:54 router kernel: re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfcffb000-0xfcffbfff,0xfcffc000-0xfcffffff irq 18 at device 0.0 on pci2
Oct 31 22:26:54 router kernel: re0: Using 1 MSI messages
Oct 31 22:26:54 router kernel: re0: Chip rev. 0x2c000000
Oct 31 22:26:54 router kernel: re0: MAC rev. 0x00000000
Oct 31 22:26:54 router kernel: miibus0: <MII bus> on re0
Oct 31 22:26:54 router kernel: rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
Oct 31 22:26:54 router kernel: rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Oct 31 22:26:54 router kernel: re0: [FILTER]
Oct 31 22:26:54 router kernel: pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
Oct 31 22:26:54 router kernel: pci3: <ACPI PCI bus> on pcib3
Oct 31 22:26:54 router kernel: pci3: <multimedia> at device 0.0 (no driver attached)
Oct 31 22:26:54 router kernel: uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xd880-0xd89f irq 23 at device 29.0 on pci0
Oct 31 22:26:54 router kernel: uhci0: [ITHREAD]
Oct 31 22:26:54 router kernel: uhci0: LegSup = 0x2f00
Oct 31 22:26:54 router kernel: usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
Oct 31 22:26:54 router kernel: uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xd800-0xd81f irq 19 at device 29.1 on pci0
Oct 31 22:26:54 router kernel: uhci1: [ITHREAD]
Oct 31 22:26:54 router kernel: uhci1: LegSup = 0x2f00
Oct 31 22:26:54 router kernel: usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
Oct 31 22:26:54 router kernel: uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xd480-0xd49f irq 18 at device 29.2 on pci0
Oct 31 22:26:54 router kernel: uhci2: [ITHREAD]
Oct 31 22:26:54 router kernel: uhci2: LegSup = 0x2f00
Oct 31 22:26:54 router kernel: usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
Oct 31 22:26:54 router kernel: uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xd400-0xd41f irq 16 at device 29.3 on pci0
Oct 31 22:26:54 router kernel: uhci3: [ITHREAD]
Oct 31 22:26:54 router kernel: uhci3: LegSup = 0x2f00
Oct 31 22:26:54 router kernel: usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
Oct 31 22:26:54 router kernel: ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe9ffc00-0xfe9fffff irq 23 at device 29.7 on pci0
Oct 31 22:26:54 router kernel: ehci0: [ITHREAD]
Oct 31 22:26:54 router kernel: usbus4: EHCI version 1.0
Oct 31 22:26:54 router kernel: usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
Oct 31 22:26:54 router kernel: pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
Oct 31 22:26:54 router kernel: pci4: <ACPI PCI bus> on pcib4
Oct 31 22:26:54 router kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Oct 31 22:26:54 router kernel: isa0: <ISA bus> on isab0
Oct 31 22:26:54 router kernel: atapci0: <Intel ICH7 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff90-0xff9f at device 31.2 on pci0
Oct 31 22:26:54 router kernel: ata0: <ATA channel 0> on atapci0
Oct 31 22:26:54 router kernel: ata0: [ITHREAD]
Oct 31 22:26:54 router kernel: ata1: <ATA channel 1> on atapci0
Oct 31 22:26:54 router kernel: ata1: [ITHREAD]
Oct 31 22:26:54 router kernel: pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
Oct 31 22:26:54 router kernel: acpi_button0: <Power Button> on acpi0
Oct 31 22:26:54 router kernel: atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Oct 31 22:26:54 router kernel: atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
Oct 31 22:26:54 router kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Oct 31 22:26:54 router kernel: kbd0 at atkbd0
Oct 31 22:26:54 router kernel: atkbd0: [GIANT-LOCKED]
Oct 31 22:26:54 router kernel: atkbd0: [ITHREAD]
Oct 31 22:26:54 router kernel: orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
Oct 31 22:26:54 router kernel: sc0: <System console> at flags 0x100 on isa0
Oct 31 22:26:54 router kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Oct 31 22:26:54 router kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Oct 31 22:26:54 router kernel: ppc0: cannot reserve I/O port range
Oct 31 22:26:54 router kernel: p4tcc0: <CPU Frequency Thermal Control> on cpu0
Oct 31 22:26:54 router kernel: p4tcc1: <CPU Frequency Thermal Control> on cpu1
Oct 31 22:26:54 router kernel: p4tcc2: <CPU Frequency Thermal Control> on cpu2
Oct 31 22:26:54 router kernel: p4tcc3: <CPU Frequency Thermal Control> on cpu3
Oct 31 22:26:54 router kernel: Timecounters tick every 1.000 msec
Oct 31 22:26:54 router kernel: IPsec: Initialized Security Association Processing.
Oct 31 22:26:54 router kernel: usbus0: 12Mbps Full Speed USB v1.0
Oct 31 22:26:54 router kernel: usbus1: 12Mbps Full Speed USB v1.0
Oct 31 22:26:54 router kernel: usbus2: 12Mbps Full Speed USB v1.0
Oct 31 22:26:54 router kernel: usbus3: 12Mbps Full Speed USB v1.0
Oct 31 22:26:54 router kernel: usbus4: 480Mbps High Speed USB v2.0
Oct 31 22:26:54 router kernel: ad0: 152627MB <HITACHI HTS723216L9SA60 FC2ZC50A> at ata0-master UDMA100 SATA
Oct 31 22:26:54 router kernel: ugen0.1: <Intel> at usbus0
Oct 31 22:26:54 router kernel: uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Oct 31 22:26:54 router kernel: ugen1.1: <Intel> at usbus1
Oct 31 22:26:54 router kernel: uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Oct 31 22:26:54 router kernel: ugen2.1: <Intel> at usbus2
Oct 31 22:26:54 router kernel: uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
Oct 31 22:26:54 router kernel: ugen3.1: <Intel> at usbus3
Oct 31 22:26:54 router kernel: uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
Oct 31 22:26:54 router kernel: ugen4.1: <Intel> at usbus4
Oct 31 22:26:54 router kernel: uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
Oct 31 22:26:54 router kernel: uhub0: 2 ports with 2 removable, self powered
Oct 31 22:26:54 router kernel: uhub1: 2 ports with 2 removable, self powered
Oct 31 22:26:54 router kernel: uhub2: 2 ports with 2 removable, self powered
Oct 31 22:26:54 router kernel: uhub3: 2 ports with 2 removable, self powered
Oct 31 22:26:54 router kernel: uhub4: 8 ports with 8 removable, self powered
Oct 31 22:26:54 router kernel: ugen4.2: <Generic> at usbus4
Oct 31 22:26:54 router kernel: umass0: <Bulk-In, Bulk-Out, Interface> on usbus4
Oct 31 22:26:54 router kernel: umass0: SCSI over Bulk-Only; quirks = 0x0000
Oct 31 22:26:54 router kernel: ugen2.2: <Logitech> at usbus2
Oct 31 22:26:54 router kernel: ukbd0: <USB Keyboard> on usbus2
Oct 31 22:26:54 router kernel: kbd2 at ukbd0
Oct 31 22:26:54 router kernel: uhid0: <USB Keyboard> on usbus2
Oct 31 22:26:54 router kernel: umass0:0:0:-1: Attached to scbus0
Oct 31 22:26:54 router kernel: (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
Oct 31 22:26:54 router kernel: (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
Oct 31 22:26:54 router kernel: (probe0:umass-sim0:0:0:0): SCSI status: Check Condition
Oct 31 22:26:54 router kernel: (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
Oct 31 22:26:54 router kernel: SMP: AP CPU #1 Launched!
Oct 31 22:26:54 router kernel: da0 at umass-sim0 bus 0 scbus0 target 0 lun 0SMP: AP CPU #3 Launched!
Oct 31 22:26:54 router kernel: da0:
Oct 31 22:26:54 router kernel: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device
Oct 31 22:26:54 router kernel: da0: 40.000MB/s transfers
Oct 31 22:26:54 router kernel: da0: Attempt to query device size failed: NOT READY, Medium not present
Oct 31 22:26:54 router kernel: SMP: AP CPU #2 Launched!
Oct 31 22:26:54 router kernel: Trying to mount root from ufs:/dev/ad0s1a
Oct 31 22:26:54 router kernel: pflog0: promiscuous mode enabled

==== >8 ================== SNAP ==========

The scsi error you see is created by the internal card reader that is builtin into the machine.

If you have questions feel free to contact me.

KR,

Oliver

Actions

Also available in: Atom PDF