Project

General

Profile

Actions

Bug #3333

closed

usbusX devices show up as NICs.

Added by Georgios Tsalikis almost 11 years ago. Updated over 10 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
Interfaces
Target version:
Start date:
11/20/2013
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.1
Affected Architecture:

Description

Version 2.1-RELEASE (amd64)
built on Wed Sep 11 18:17:34 EDT 2013
FreeBSD 8.3-RELEASE-p11

You are on the latest version.
Platform nanobsd (4g)
NanoBSD Boot Slice pfsense0 / da0s1 (ro)
CPU Type Intel(R) Atom(TM) CPU D510 @ 1.66GHz
4 CPUs: 1 package(s) x 2 core(s) x 2 HTT threads

The motherboard is an Intel D510MO
WAN is some Realtek 100mbit PCI card.

A fresh nanobsd (vga) on a USB flash drive, sees a series of interfaces with a "usbusX" name. At the first boot and whenever i use the autodetection feature from the console, the NIC detected for WAN "usbus0". But plugging and unpluging the cable emmits a "link rl0 is down/up". If i manually choose to use "rl0", which i know is correct, then the router will work. If i accept "usbus0" not only WAN doesnt work, but a reboot will cause infinite reboots. My eye catches some "rl0 irq5" message before it reboots again.

Actions

Also available in: Atom PDF