Project

General

Profile

Bug #3556

WAN interface status missing data for pppoe ipv6 connection

Added by Adrien Carlyle about 5 years ago. Updated over 3 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
-
Category:
Interfaces
Target version:
-
Start date:
03/29/2014
Due date:
% Done:

0%

Estimated time:
Affected Version:
2.1-IPv6
Affected Architecture:

Description

When looking at status -> interfaces data is missing for WAN connection with native IPv6 over pppoe.

Web interface shows the attached for status, while the console shows this for the interface.

pppoe0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric 0 mtu 1492
inet6 fe80::20d:b9ff:fe23:f3e0%pppoe0 prefixlen 64 scopeid 0xa
inet6 fe80::d14b:1f14:a42a:9e32%pppoe0 prefixlen 64 scopeid 0xa
inet6 2607:f2c0:a000:c:20d:b9ff:fe23:f3e0 prefixlen 64 autoconf
inet 69.165.170.146 --> 206.248.154.103 netmask 0xffffffff
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>

History

#1 Updated by Adrien Carlyle about 5 years ago

Forgot to mention that the interface widget on the dashboard is also missing IPv6 information for the interface. I assume this is because it's ignoring the link local address.

#2 Updated by Chris Buechler over 3 years ago

  • Category set to Interfaces

#3 Updated by Adrien Carlyle over 3 years ago

I just checked this on 2.2.5 and it is no longer an issue.

#4 Updated by Chris Buechler over 3 years ago

  • Status changed from New to Resolved

thanks, thought that was fixed but didn't have a system handy to check at the time.

Also available in: Atom PDF