Bug #3826
closed2.2 diag_ipsec.php issues
0%
Description
Couple issues with diag_ipsec.php.
1) always shows NAT-T - shows NAT-T for seemingly all IPsec connections. A basic site to site config with NAT-T disabled is the easiest way to replicate, you'll end up with something like:
1.2.3.4:500 NAT-T
2) the Overview tab doesn't show tunnels that are configured, but don't have SAs. Every non-disabled IPsec tunnel needs to show up on diag_ipsec.php, as they always have.
3) the local and remote networks fields display something like:
10.0.0.0/24|/0
The |/0 needs to be trimmed off there to avoid confusing people.
Updated by Ermal Luçi over 10 years ago
- Status changed from New to Feedback
Point 1) is fixed already.
Point 3) has been corrected by Renato though it does not show the local subnet in case of nat specified.
Should be ok now.
Updated by Chris Buechler about 10 years ago
- Status changed from Feedback to Resolved
these issues are fixed. The page as a whole needs some design work so "Overview" isn't a huge wall of text, will cover that separately.