Bug #4365
closed
ALTQ Traffic Shaping is not working in pfSense 2.2 when run on Hyper-V 2012 R2
0%
Description
Using pfSense 2.2 release on Hyper-V 2.2 with regular network adapters (not legacy adapters), HFSC queues can be set up properly, however it does not appear to be working. When you go to view the queues, an error appears to be logged:
php-fpm51998: /status_queues.php: XML error: no altqstats object found!
In looking at the ALTQ documentation, it appears the hn drivers are not supported, but this forum post seems to indicate that they are: https://forum.pfsense.org/index.php?topic=83475.0
I am not sure what other information I can provide, but will gladly upon request.
Updated by Chris Buechler over 9 years ago
- Status changed from New to Feedback
that message means there are no queues in the running ruleset. I suspect this is actually a duplicate of a different bug with Hyper-V, fixed in 2.2.1 snapshots. #4445 Try a 2.2.1 snapshot from https://snapshots.pfsense.org and report back, I suspect that will probably fix it.
Updated by Aaron Smith over 9 years ago
Not fixed in 2.2.1 snapshot.
I ran through the multi-wan wizard using defaults for most things and just clicked next through everything. Once finished it said it was reloading. I went to view the queues and none show up. Look in the system log and still see this:
Mar 12 00:37:14 pfSense check_reload_status: Reloading filter
Mar 12 00:37:20 pfSense php-fpm53349: /status_queues.php: XML error: no altqstats object found!
Updated by Andrey Platonov about 9 years ago
Still not working at 2.2.5-RELEASE. Hypervisor is Hyper-V 2012, too. Needed to change shaper scheduler to PRIQ, which is not so good
Updated by Chris Buechler almost 9 years ago
- Category set to Traffic Shaper (ALTQ)
Updated by Jim Pingle about 7 years ago
- Status changed from Feedback to Resolved
Try again on 2.4, if it is possible, it should work there.