Project

General

Profile

Bug #4594

Interface names can be too long for netstat to display in full

Added by Guido Schmitz about 4 years ago. Updated over 3 years ago.

Status:
Resolved
Priority:
Normal
Category:
Routing
Target version:
Start date:
04/08/2015
Due date:
% Done:

0%

Estimated time:
Affected Version:
All
Affected Architecture:

Description

Interface names can get too long for netstat -rW or for Diagnostics->Routes (in the GUI) to display. The names get abbreviated leaving the actual interface used a mystery.

For example, if you configure link aggregation together with vlans, the resulting interface name will be laggX_vlanYYYY. The interface name is abbreviated to laggX_vlan and is missing the vlan id.

History

#1 Updated by Chris Buechler about 4 years ago

  • Subject changed from Interface names too long to Interface names can be too long for netstat to display in full
  • Status changed from New to Confirmed
  • Affected Version changed from 2.2.1 to All

#2 Updated by Jim Thompson over 3 years ago

  • Status changed from Confirmed to Feedback
  • Assignee set to Chris Buechler
  • Target version set to 2.3

#3 Updated by Chris Buechler over 3 years ago

  • Status changed from Feedback to Resolved

this was fixed in 10-STABLE some time ago, works in 2.3.

Also available in: Atom PDF