Bug #5005
closed
Quagga OSPF Package GUI Fails on 2.2.4
0%
Description
Service > Quagga OSPFd > Status tab results in 404 - Not Found.
Service > Quagga OSPFd > Raw Config tab results in exclamation ERROR: No valid package defined.
2.2.4-RELEASE (i386)
built on Sat Jul 25 19:56:41 CDT 2015
FreeBSD 10.1-RELEASE-p15
On package install:
the pacakge installer tab states: Loading package configuration... done.
Additional files... quagga_ospfd_raw.xml failed.
Loading package instructions...
Copying quagga_ospfd_raw_xml from a 2.2.2 box does not make the gui work. Reinstalling the GUI XML components through packages does not fix.
Quagga itself communicates fine and establishes Full Neighbor. Only the GUI seems to have issues.
Updated by paul f almost 10 years ago
recreated on another i386 alix box with same pfsense config (backup restore from original). not recreated on i386 alix box with different config (package worked correctly). copying /usr/local/www/status_ospfd.php and /usr/local/bin/quaggactl over seems to fix the problem.
Updated by Kill Bill almost 10 years ago
Beginning package installation for Quagga OSPF . Downloading package configuration file... done. Saving updated package information... done. Downloading Quagga OSPF and its dependencies... Checking for package installation... Downloading https://files.pfsense.org/packages/10/All/quagga-0.99.23.1_2-amd64.pbi ... (extracting) Loading package configuration... done. Configuring package components... Loading package configuration... done. Additional files... done. Loading package instructions... Custom commands... Executing custom_php_resync_config_command()...done. Menu items... done. Integrated Tab items... done. Services... done. Writing configuration... done. Installation completed. Please check to make sure that the package is configured from the respective menu then start the package.
Zero issues with the GUI as well, all the tabs working. I think you should stop copying/restoring your broken config.
Updated by Chris Buechler almost 10 years ago
- Status changed from New to Not a Bug
- Affected Version deleted (
2.2.4)
it indeed works fine in general.
Updated by Pi Ba over 9 years ago
Looks like a bug to me, this might be the issue: https://github.com/pfsense/pfsense-packages/pull/1090
Installation currently complains a little on my 2.2.4 x64 install to..:
Beginning package installation for Quagga OSPF .
Downloading package configuration file... done.
Saving updated package information... done.
Downloading Quagga OSPF and its dependencies...
Checking for package installation...
Downloading https://files.pfsense.org/packages/10/All/quagga-0.99.23.1_2-amd64.pbi ... (extracting)
Loading package configuration... done.
Configuring package components...
Loading package configuration... done.
Additional files... quagga_ospfd_raw.xml failed.
Loading package instructions...
Custom commands...
Executing custom_php_resync_config_command()...done.
Menu items... done.
Integrated Tab items... done.
Services... done.
Writing configuration... done.
Installation completed. Please check to make sure that the package is configured from the respective menu then start the package.
Updated by paul f over 9 years ago
I've had three successful upgrades so far on different boxes. The one failed upgrade that I reproduced with the config file is still broken. I've backed up the config without package info, removed the package, upgraded again to 2.2.4, and then reinstalled with the same error. I've done the same steps and then searched the file system to remove any file with quagga or ospf in the name before re-upgrading and it still fails. It's a remote box, so I'm not sure how to fix this without performing a clean install locally.
Updated by Pi Ba over 9 years ago
Can you try reinstalling the package again?
The pullrequest was committed 15 minutes ago.
Updated by paul f over 9 years ago
Great success! The webgui Status tab works and I've got 4 neighbors again. Thanks!