Bug #5273
closed
UMTS / 3G Connection reports wrong Gateway information (10.64.64.0) and no data is going through that connection.
0%
Description
Hello Pfsense team,
first of all thanks for all the work you put into PFsense. I am using it since 5 years now and am very happy in general.
However I rebuilt my PFsense to be a 2.2.4 release the weekend. With this I wanted to reactivate my UMTS / 3G failover because I had a downtime recently. Everything (the setup itself) worked as I was familiar with from 2.0.3 days.
I am using an Huawei E220 UMTS stick which gets recognized and I also can dial in through PPP.
I was testing the failover but could not get any data over this connection. On the gateway monitor page I can see the following information:
Name Gateway Monitor Status Description
WAN 10.64.64.0 10.64.64.0 Offline Interface WAN Dynamic Gateway
Tried to find a solution in the WWW but stumbled only over this:
https://redmine.pfsense.org/issues/919
With 2.0.3 (and maybe also 2.1) it was working like a charme and using the UMTS stick for himself on a Windows machine also works as expected.
Hope you can fix this.
Thanks a lot.
Thomas
Files
| Dial-In_on_Mac.png (20.6 KB) Dial-In_on_Mac.png | On the MAC I get correct GW Information through the connection. | ||
| Disconnected_UMTS.png (33.4 KB) Disconnected_UMTS.png | Disconnected | ||
| Connected_UMTS_with_no_GW_in_PPP.png (64.1 KB) Connected_UMTS_with_no_GW_in_PPP.png | Connected 3G with NO GW defined in PPP Connection -> 10.64.64.0 | ||
| Cell-SIM-State_locked.png (9.09 KB) Cell-SIM-State_locked.png | Cell / SIM State report. Why locked? No SIM-Lock on SIM. | ||
| ppp.log (6.69 KB) ppp.log | PPP Log without manually configured GW and with correct GW manually configured. |
Updated by 
Updated by 
