Project

General

Profile

Actions
Copy link

Bug #713

closed

Shaper Wizard: When backlogged, high priority queues get zero bandwidth

Added by Aaron Berland over 14 years ago. Updated almost 14 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
-
Category:
Traffic Shaper (ALTQ)
Target version:
2.0
Start date:
07/02/2010
Due date:
% Done:

100%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.0
Affected Architecture:

Description

Shaper wizard results for basic config:

qOthersLow - LinkShare: 5%, 500ms, 5% < This is a flat curve and redundant., 5% for the first 500ms and then 5% after that.
qOthersHigh - LinkShare: 0b, 200ms, 10% < No traffic allowed until service curve opens up!
qAck - LinkShare: 0b, 100ms, 20% < No ACKs allowed until service curve opens up!

Fix: remove m1 and d service curve values to allow traffic to flow immediately. Advanced users can set service curves if they want/need them. Don't prevent traffic from flowing by default!

Files

Download all files
Screen_shot_2010-07-02_at_12.22.02_PM.png (39.3 KB) Screen_shot_2010-07-02_at_12.22.02_PM.png Aaron Berland, 07/02/2010 01:31 PM
Screen_shot_2010-07-02_at_12.22.16_PM.png (38.9 KB) Screen_shot_2010-07-02_at_12.22.16_PM.png Aaron Berland, 07/02/2010 01:31 PM
Screen_shot_2010-07-02_at_12.22.28_PM.png (37.1 KB) Screen_shot_2010-07-02_at_12.22.28_PM.png Aaron Berland, 07/02/2010 01:31 PM
Actions
Copy link

Also available in: Atom PDF