Bug #7534
closed
gif interface with /64 subnet gets configured as /128
0%
Description
A gif tunnel (with tunnelbroker.net) has been configured with /64 nets in GIF settings, as well as on OPT6 interface - probably because it is a point-to-point connection. Adding a (default) gateway in interface.php works, editing the route in system_gateways.php fails the input validation stating: "The gateway address 2001:470:1f0a:22b::1 does not lie within one of the chosen interface's subnets." which is plausible when you look at status_interfaces.php
Workaround: When gateway has to be edited, it is possible to delete the gateway and re-add it from the interface as new gateway.
HENETV6 Interface (opt6, gif0)
Status up
MAC Address 00:00:00:00:00:00 - Xerox
IPv6 Link Local fe80::21b:21ff:fe2c:ba6d%gif0
IPv6 Address 2001:470:1f0a:22b::2
Subnet mask IPv6 128
MTU 1480
In/out packets 389789/308690 (187.18 MiB/19.13 MiB)
In/out packets (pass) 389789/308690 (187.18 MiB/19.13 MiB)
In/out packets (block) 24/0 (2 KiB/0 B)
In/out errors 0/0
Collisions 0
also in routing table:
2001:470:1f0a:22b::1 link#19 UH 694 1280 gif0
2001:470:1f0a:22b::2 link#19 UHS 0 16384 lo0
Files
| Bildschirmfoto von »2017-05-10 15-01-48«.png (31.9 KB) Bildschirmfoto von »2017-05-10 15-01-48«.png | GIF interface settings | ||
| Bildschirmfoto von »2017-05-10 15-00-54«.png (45.3 KB) Bildschirmfoto von »2017-05-10 15-00-54«.png | OPT interface settings |
Updated by Jim Pingle over 5 years ago
- Status changed from New to Not a Bug
Having /128 on the gifX interface is normal and expected. The other things here appear to be fixed. Users are not allowed to manually set an interface address in assigned gif interfaces, it's set in the gif entry. The automatic gateway for gif interfaces works fine and can be edited as expected.