Actions
Bug #7992
closed
SNMP service causes constant disk activity
Status:
Duplicate
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
10/23/2017
Due date:
% Done:
0%
Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.4
Affected Architecture:
Description
I've only noticed this since upgrading to 2.4
With the SNMP service enabled, but not being used, the disk is constantly being accessed. With the service turned off, the disk LED rarely blinks. I toggled it several times to verify the behavior.
I don't know if it makes a difference, but I had all SNMP modules checked and it was bound only to the LAN interface. Traps were not enabled.
Updated by Jim Pingle over 6 years ago
- Status changed from New to Duplicate
Most likely a duplicate of #6882 just a different symptom. Give 2.4.1 a try.
Updated by Stuart Wyatt over 6 years ago
I'll do some tests to see if it's fixed with #6882 fix.
FYI, the CPU usage was low and swap was 0%. All sys info was similar to before the upgrade. Disk usage is at 1%.
Updated by Stuart Wyatt over 6 years ago
Host Resources appears to be the culprit, and I have an empty CD drive like the related bug.
Actions