Feature #8356
closed
- Status changed from New to Feedback
With igmp proxy configured on 2.4.2(or p1), upgrade to 2.4.3 (running 2.4.3.a.20180308.1837 here). The config keeps igmp proxy enabled, the service starts and runs, but in the gui it shows disabled.
This is how the config looks at the point described above:
<igmpproxy>
<igmpentry>
<ifname>wan</ifname>
<threshold></threshold>
<type>upstream</type>
<address>172.21.x.x/29</address>
<descr><![CDATA[test-wan]]></descr>
</igmpentry>
<igmpentry>
<ifname>lan</ifname>
<threshold></threshold>
<type>downstream</type>
<address>10.0.0.1/8</address>
<descr><![CDATA[test-lan]]></descr>
</igmpentry>
<enabled></enabled>
</igmpproxy>
Checking the 'Enable IGMP' box and saving, applying, then unchecking the box, saving and applying does not stop the service.
- Status changed from Feedback to New
- Assignee set to Jim Pingle
- Status changed from New to Feedback
- % Done changed from 0 to 100
Works as expected. With the checkbox unchecked, igmp proxy is disabled and not running. With the checkbox checked, igmp proxy is enabled and runs.
checkbox checked
<igmpproxy>
<igmpentry>
<ifname>wan</ifname>
<threshold></threshold>
<type>upstream</type>
<address>172.21.x.x/29</address>
<descr><![CDATA[test-wan]]></descr>
</igmpentry>
<igmpentry>
<ifname>lan</ifname>
<threshold></threshold>
<type>downstream</type>
<address>10.0.0.1/8</address>
<descr><![CDATA[test-lan]]></descr>
</igmpentry>
<enable></enable>
</igmpproxy>
checkbox unchecked
<igmpproxy>
<igmpentry>
<ifname>wan</ifname>
<threshold></threshold>
<type>upstream</type>
<address>172.21.x.x/29</address>
<descr><![CDATA[test-wan]]></descr>
</igmpentry>
<igmpentry>
<ifname>lan</ifname>
<threshold></threshold>
<type>downstream</type>
<address>10.0.0.1/8</address>
<descr><![CDATA[test-lan]]></descr>
</igmpentry>
</igmpproxy>
- Status changed from Feedback to Resolved
Also available in: Atom
PDF
Updated by 
Updated by Anonymous 
