Actions
Bug #8545
closed
LACP can't be established on QLogic NetXtreme II BCM57810 NICs
Status:
Rejected
Priority:
Normal
Assignee:
-
Category:
Interfaces
Target version:
-
Start date:
05/31/2018
Due date:
% Done:
0%
Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.4.x
Affected Architecture:
amd64
Description
I created LAGG interface with two network cards (QLogic NetXtreme II BCM57810 10GbE (B0) BXE v:1.78.90) and assigned it to WAN. The LAGG proto is LACP. The connection is not coming up unless I put at least one of the interfaces (bxe0/bxe1/lagg0) into promiscuous mode (ifconfig lagg0 promisc).
The system.log shows "Interface stopped DISTRIBUTING" after removing promisc mode.
Updated by Jim Pingle over 6 years ago
That should probably be tested on FreeBSD directly to see if the problem happens there as well. It sounds like a driver issue you'll need to bring up with FreeBSD directly for that hardware.
Updated by Jim Pingle over 5 years ago
- Category set to Interfaces
- Status changed from New to Rejected
Needs tested on 2.5.0 at least, and preferably FreeBSD directly. Unlikely there is anything we can do for this, seems like a driver issue.
Updated by Viktor Gurov over 4 years ago
Actions