Bug #8565
closed
NAT with IPSec
0%
Description
I have a configuration described in the Word attached document.
The version of the PFSENSE product is
2.0.1-RELEASE (amd64)
built on Mon Dec 12 18:16:13 EST 2011
FreeBSD 8.1-RELEASE-p6
A remote user built a tunnel from a remote site and shall reach a network via Tunnel and the NAT.
From the remote to the server, the packet is well encrypted within the tunnel and cross the PFSENSE where the NAT runs fine and the IP packet is correctly sent to the server.
When the server answers, the PFSENSE does the NAT, which is fine, but the packet is sent back to the WAN interface instead of the tunnel one. It seems the tunnel rules are not checked after the NAT rules.
Is it a bug of that version, is the configuration wrong somewhere ?
Best regards
Fabien
Files
Updated by Jim Pingle over 7 years ago
- Status changed from New to Rejected
That version is over 6 years out of date. Problem reports against old, unsupported versions are not acceptable. Upgrade to a supported release. If you still have a problem on a supported release, post on the forum or the pfSense subreddit for assistance.