Bug #8618
closed
2.4.4 *possible bug* with Intel C3858 and Interface Auto-Detection on 10Gb interfaces
0%
Description
Hi all,
I'm not a developer (also my first possible bug report) of any sort but i hope I am providing enough detail for this post to be helpful.
Motherboard: SuperMicro A2SDi-TP8F | https://www.supermicro.com/products/motherboard/atom/A2SDi-TP8F.cfm
PF Sense Version: pfSense-CE-memstick-2.4.4-DEVELOPMENT-amd64-latest.img
PF Sense Download Date: 07/04/2018
Nics: 4x 1Gbe (Pro 1000) | Quad LAN with Intel Ethernet Controller I350-AM4
Nics: 4x10Gbe (Pro/10Gbe) | C3000 SoC 2 10GBaseT, 2 10Gb SFP+
Issue:
When attempting to setup interfaces on PFSense 2.4.4 using autodetection none of the 10Gbe interfaces are ever detected to have a link up so autodetection doesnt seem to work.
Doing the same thing with the 1gbe interfaces works fine just like normal.
Steps I am doing to produce bug:
- select option 1 for assign interfaces
- select n to assign vlans first
- select a to use interface autodetection
- plug in a ethernet cable into one of the 10Gbe copper ports wait for light to come up on port
- select enter to use auto-detection at which point it says "No link-up detected"
I also have a screenshot below that shows this process since the supermicro board has ipmi.
Not sure if this qualifies as a bug or not and i know the c3858 is fairly new which is why i needed to use 2.4.4 since it has driver support for this version of free bsd.
Hopefully this is a helpful bug report. Please let me know if I should submit it elsewhere.
Thank you
Picture Link: https://imgur.com/K7DKxrD
Orignal Post: https://forum.netgate.com/topic/132529/2-4-4-possible-bug-with-intel-c3858-and-interface-auto-detection-on-10gb-interfaces/2
Files
Updated by 
Updated by 
Updated by 
Updated by 