Actions
Bug #9116
closed
IPsec VTI routes not applied at boot time when gateway monitoring is disabled
Start date:
11/13/2018
Due date:
% Done:
100%
Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.4.4
Affected Architecture:
All
Description
With gateway monitoring enabled, an interface event kicks off a restart of other scripts which apply the routing and then the route is present in the table.
With gateway monitoring disabled, the route is not present in the table at all.
Looking at the code, the IPsec interface configure explicitly does not set routes at boot time, which is likely the cause. Removing the check lets it work and appears to have no negative side effects.
Updated by Jim Pingle about 6 years ago
- Status changed from Assigned to Feedback
- % Done changed from 0 to 100
Applied in changeset ed104a182a95f0ce4e6df76a8c3f0698ff7ce092.
Updated by Yordan Georgiev about 6 years ago
Jim Pingle wrote:
Applied in changeset ed104a182a95f0ce4e6df76a8c3f0698ff7ce092.
Fix works fine! Tnx!
Updated by Jim Pingle about 6 years ago
- Status changed from Feedback to Resolved
Actions