Project

General

Profile

Actions
Copy link

Bug #916

closed

OpenNTPd Does Not Operate

Added by Andreas van dem Helge about 14 years ago. Updated about 14 years ago.

Status:
Rejected
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
09/21/2010
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
Affected Architecture:

Description

The OpenNTPd server does not operate. There is no option to install further NTP services in System > Packages. There is no configuration under Services > (e.g. NTP or OpenNTPd)

2.0-BETA4 Wed Sep 8 05:47:43 UTC 201

Status > Services:
ntpd "Running"

Firewall > Rules > LAN:
Proto: TCP/UPD
Source: LAN net
Source Port: *
Destination: LAN Address
Port: 123 (NTP)
Gateway: *
Queue: none

  1. ifconfig
    eth0 Link encap:Ethernet HWaddr 00:1E:90:1C:26:D2
    inet addr:172.20.13.249 Bcast:172.20.13.255 Mask:255.255.254.0
    inet6 addr: fe80::21e:90ff:fe1c:26d2/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:530145 errors:0 dropped:0 overruns:0 frame:0
    TX packets:537932 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:114939470 (109.6 Mb) TX bytes:120519047 (114.9 Mb)
    Interrupt:27 Base address:0x8000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:68 errors:0 dropped:0 overruns:0 frame:0
TX packets:68 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:26066 (25.4 Kb) TX bytes:26066 (25.4 Kb)

w1g1 Link encap:Point-to-Point Protocol
UP POINTOPOINT RUNNING NOARP MTU:8 Metric:1
RX packets:9654514 errors:0 dropped:0 overruns:0 frame:0
TX packets:9654514 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17 Memory:f7eb0000-f7eb1fff

  1. sntp -P no -r 172.20.13.254
    sntp: not enough valid responses received in time
  1. nmap 172.20.13.254

Starting Nmap 5.00 ( http://nmap.org ) at 2010-09-21 15:05 EDT
Interesting ports on pfsense.fhu.local (172.20.13.254):
Not shown: 997 filtered ports
PORT STATE SERVICE
22/tcp open ssh
53/tcp open domain
80/tcp open http
MAC Address: 00:26:B9:43:AC:E9 (Unknown)

Nmap done: 1 IP address (1 host up) scanned in 5.24 seconds

Actions
Copy link
 #1

Updated by Chris Buechler about 14 years ago

  • Status changed from New to Rejected

It works fine. It will not provide responses immediately, you have to wait an hour or two after it launches until it's satisfied it's synced. It's not going to show up in a nmap scan as it's UDP. I'm sure if you capture traffic you'll see it's sending replies that it's not providing time sync yet.

Actions
Copy link
 #2

Updated by Andreas van dem Helge about 14 years ago

That is correct. This is not documented: http://69.64.6.24/index.php/NTP_Server_(OpenNTPD)

How can I get access to update the documentation?

Actions
Copy link

Also available in: Atom PDF