Project

General

Profile

Actions

Feature #9555

closed

pimd package

Added by Michael Pelley almost 5 years ago. Updated about 3 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
Category:
PIMD
Target version:
-
Start date:
05/27/2019
Due date:
% Done:

100%

Estimated time:
Plus Target Version:

Description

Folks - as it seems that IGMP Proxy is "broken" and pimd works is it possible to add (or replace) IGMP Proxy with pimd? The config webpage seems like it could be just and update of the IGMP Proxy page. Thanks!

Actions #1

Updated by Jim Pingle over 4 years ago

  • Project changed from pfSense to pfSense Packages
  • Category set to New Package Request
Actions #2

Updated by Pete Holzmann over 4 years ago

Michael Pelley wrote:

Folks - as it seems that IGMP Proxy is "broken" and pimd works is it possible to add (or replace) IGMP Proxy with pimd?

I strongly concur. I was saddened to see multicast break when switching to pfSense. Among the important applications currently broken:
  • Retrospect backup endpoint discovery across subnets
  • WS-Discovery (or if old-school-scary WINS :( ) cross-subnet networking (SAMBA etc)
  • Device discovery for Sonos and other HW
  • Endpoint discovery for dropbox
    etc...
Actions #3

Updated by Andy Shulman over 4 years ago

+1, igmpproxy stopped working for Sonos systems after pfsense update several years ago (I want to say 2.2 -> 2.3, but I don't remember for sure at this point). There's a great guide to getting it working with pimd at https://forum.netgate.com/topic/139218/sonos-speakers-and-applications-on-different-subnets-vlan-s.

Actions #4

Updated by Jim Pingle about 4 years ago

  • Subject changed from pimd in base package with configuration webpage to pimd package
  • Assignee set to Jim Pingle

I've been tinkering with this and just about have it ready. Will commit soon.

Actions #5

Updated by Jim Pingle about 4 years ago

  • Status changed from New to Feedback
  • % Done changed from 0 to 100

Should be available to install as a package on 2.5.0 and 2.4.5 snapshot builds soon.

Actions #6

Updated by Jim Pingle about 4 years ago

This is now available to install on 2.4.5 and 2.5.0 snapshots, and is ready for testing.

Forum thread for feedback: https://forum.netgate.com/topic/149909/new-package-pimd

Actions #7

Updated by Jim Pingle about 4 years ago

  • Category changed from New Package Request to PIMD
Actions #8

Updated by Jim Pingle about 4 years ago

This is also now available to install and test on 2.4.4-p3.

Actions #9

Updated by Azamat Khakimyanov about 3 years ago

  • Status changed from Feedback to Resolved

Tested on 2.4.5_p1 and on 21.02-DEVELOPMENT (built on Mon Feb 01 00:05:45 EST 2021)

Tested with 3 different multicast sources:
- vlc
- iperf
- some multicast test app
Everything was working correctly. I saw correct multicast route table.

This feature request can be marked resolved.

Actions

Also available in: Atom PDF