pfSense

# $FreeBSD: stable/10/etc/gettytab 241708 2012-10-18 22:20:02Z peterj $

#	from: @(#)gettytab	5.14 (Berkeley) 3/27/91

#

# Most of the table entries here are just copies of the old getty table,

# it is by no means certain, or even likely, that any of them are optimal

# for any purpose whatever.  Nor is it likely that more than a couple are

# even correct.

#

# The default gettytab entry, used to set defaults for all other

# entries, and in cases where getty is called with no table name.

#

# cb, ce and ck are desirable on most crt's.  The non-crt entries need to

# be changed to turn them off (:cb@:ce@:ck@:).

#

# lc should always be on; it's a remainder of some stone age when there

# have been terminals around not being able of handling lower-case

# characters. Those terminals aren't supported any longer, but getty is

# `smart' about them by default.

#

# Parity defaults to even, but the Pc entry and all the `std' entries

# specify no parity.   The different parities are:

#     (none): same as ep for getty.  login will use terminal as is.

#     ep:     getty will use raw mode (cs8 -parenb) (unless rw is set) and

#             fake parity.  login will use even parity (cs7 parenb -parodd).

#     op:     same as ep except odd parity (cs7 parenb parodd) for login.

#             getty will fake odd parity as well.

#     ap:     same as ep except -inpck instead of inpck for login.

#             ap overrides op and ep.

#     np:     1. don't fake parity in getty.  The fake parity garbles

#                characters on non-terminals (like pccons) that don't

#                support parity.  It would probably better for getty not to

#                try to fake parity.  It could just use cbreak mode so as

#                not to force cs8 and let the hardware handle the parity.

#                login has to be rely on the hardware anyway.

#             2. set cs8 -parenb -istrip -inpck.

#     ep:op:  same as ap.

#

default:\

	:cb:ce:ck:lc:fd#1000:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:\

	:if=/etc/issue:

#

# Fixed speed entries

#

#	The "std.NNN" names are known to the special case

#	portselector code in getty, however they can

#	be assigned to any table desired.

#	The "NNN-baud" names are known to the special case

#	autobaud code in getty, and likewise can

#	be assigned to any table desired (hopefully the same speed).

#

a|std.110|110-baud:\

	:np:nd#1:cd#1:uc:sp#110:

b|std.134|134.5-baud:\

	:np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl:

1|std.150|150-baud:\

	:np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 :

c|std.300|300-baud:\

	:np:nd#1:cd#1:sp#300:

d|std.600|600-baud:\

	:np:nd#1:cd#1:sp#600:

f|std.1200|1200-baud:\

	:np:fd#1:sp#1200:

6|std.2400|2400-baud:\

	:np:sp#2400:

7|std.4800|4800-baud:\

	:np:sp#4800:

2|std.9600|9600-baud:\

	:np:sp#9600:

g|std.19200|19200-baud:\

	:np:sp#19200:

std.38400|38400-baud:\

	:np:sp#38400:

std.57600|57600-baud:\

	:np:sp#57600:

std.115200|115200-baud:\

	:np:sp#115200:

std.230400|230400-baud:\

	:np:sp#230400:

#

# Entry specifying explicit device settings.  See termios(4) and

# /usr/include/termios.h, too.  The entry forces the tty into

# CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control.

#

# cflags: CLOCAL | HUPCL | CREAD | CS8

# oflags: OPOST | ONLCR | OXTABS

# iflags: IXOFF | IXON | ICRNL | IGNPAR

# lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE

#

# The `0' flags don't have input enabled.  The `1' flags don't echo.

# (Echoing is done inside getty itself.)

#

local.9600|CLOCAL tty @ 9600 Bd:\

	:c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:\

	:o0#0x00000007:o1#0x00000002:o2#0x00000007:\

	:i0#0x00000704:i1#0x00000000:i2#0x00000704:\

	:l0#0x000005cf:l1#0x00000000:l2#0x000005cf:\

	:sp#9600:np:

#

# Dial in rotary tables, speed selection via 'break'

#

0|d300|Dial-300:\

	:nx=d1200:cd#2:sp#300:

d1200|Dial-1200:\

	:nx=d150:fd#1:sp#1200:

d150|Dial-150:\

	:nx=d110:lm@:tc=150-baud:

d110|Dial-110:\

	:nx=d300:tc=300-baud:

#

# Fast dialup terminals, 2400/1200/300 rotary (can start either way)

#

D2400|d2400|Fast-Dial-2400:\

	:nx=D1200:tc=2400-baud:

3|D1200|Fast-Dial-1200:\

	:nx=D300:tc=1200-baud:

5|D300|Fast-Dial-300:\

	:nx=D2400:tc=300-baud:

#

#telebit (19200)

#

t19200:\

	:nx=t2400:tc=19200-baud:

t2400:\

	:nx=t1200:tc=2400-baud:

t1200:\

	:nx=t19200:tc=1200-baud:

#

#telebit (9600)

#

t9600:\

	:nx=t2400a:tc=9600-baud:

t2400a:\

	:nx=t1200a:tc=2400-baud:

t1200a:\

	:nx=t9600:tc=1200-baud:

#

# Odd special case terminals

#

-|tty33|asr33|Pity the poor user of this beast:\

	:tc=110-baud:

4|Console|Console Decwriter II:\

	:nd@:cd@:rw:tc=300-baud:

e|Console-1200|Console Decwriter III:\

	:fd@:nd@:cd@:rw:tc=1200-baud:

i|Interdata console:\

	:uc:sp#0:

l|lsi chess terminal:\

	:sp#300:

X|Xwindow|X window system:\

	:fd@:nd@:cd@:rw:sp#9600:

P|Pc|Pc console:\

	:ht:np:sp#9600:

al.Pc:\

	:ht:np:sp#9600:al=root:

# Weirdo special case for fast crt's with hardcopy devices

#

8|T9600|CRT with hardcopy:\

	:nx=T300:tc=9600-baud:

9|T300|CRT with hardcopy (300):\

	:nx=T9600:tc=300-baud:

#

# Plugboard, and misc other terminals

#

plug-9600|Plugboard-9600:\

	:pf#1:tc=9600-baud:

p|P9600|Plugboard-9600-rotary:\

	:pf#1:nx=P300:tc=9600-baud:

q|P300|Plugboard-300:\

	:pf#1:nx=P1200:tc=300-baud:

r|P1200|Plugboard-1200:\

	:pf#1:nx=P9600:tc=1200-baud:

#

# XXXX Port selector

#

s|DSW|Port Selector:\

	:ps:sp#2400:

#

# Auto-baud speed detect entry for Micom 600.

# Special code in getty will switch this out

# to one of the NNN-baud entries.

#

A|Auto-baud:\

	:ab:sp#2400:f0#040:

#

# autologin - automatically log in as root

#

autologin|al.9600:\

	:al=root:tc=std.9600:

al.19200:\

	:al=root:tc=std.19200:

al.38400:\

	:al=root:tc=std.38400:

al.57600:\

	:al=root:tc=std.57600:

al.115200:\

	:al=root:tc=std.115200:

al.230400:\

	:al=root:tc=std.230400:

#

# Entries for 3-wire serial terminals.  These don't supply carrier, so

# clocal needs to be set, and crtscts needs to be unset.

#

3wire.9600|9600-3wire:\

	:np:nc:sp#9600:

3wire.19200|19200-3wire:\

	:np:nc:sp#19200:

3wire.38400|38400-3wire:\

	:np:nc:sp#38400:

3wire.57600|57600-3wire:\

	:np:nc:sp#57600:

3wire.115200|115200-3wire:\

	:np:nc:sp#115200:

3wire.230400|230400-3wire:\

	:np:nc:sp#230400: