|
FreeBSD/amd64 (Test-rt-01.abc.example.com) (ttyu0)
|
|
|
|
*** Welcome to pfSense 2.3-ALPHA-nanobsd (amd64) on Test-rt-01 ***
|
|
|
|
WAN (wan) -> re1 -> v4/DHCP4: 10.49.209.3/22
|
|
LAN (lan) -> re2 -> v4: 10.49.64.250/22
|
|
OPT1 (opt1) -> re0 -> v4: 10.49.68.250/22
|
|
|
|
0) Logout (SSH only) 9) pfTop
|
|
1) Assign Interfaces 10) Filter Logs
|
|
2) Set interface(s) IP address 11) Restart webConfigurator
|
|
3) Reset webConfigurator password 12) pfSense Developer Shell
|
|
4) Reset to factory defaults 13) Upgrade from console
|
|
5) Reboot system 14) Disable Secure Shell (sshd)
|
|
6) Halt system 15) Restore recent configuration
|
|
7) Ping host 16) Restart PHP-FPM
|
|
8) Shell
|
|
|
|
|
|
Enter an option: 13
|
|
|
|
>>> Updating repositories... done.
|
|
>>> Unlocking kernel package... done.
|
|
The following 3 package(s) will be affected (of 0 checked):
|
|
|
|
Installed packages to be UPGRADED:
|
|
pfSense-kernel-pfSense: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
|
|
pfSense-default-config-serial: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
|
|
pfSense-base-nanobsd: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
|
|
|
|
The operation will free 210 B.
|
|
38 MiB to be downloaded.
|
|
|
|
Proceed with upgrade? (y/N) y
|
|
>>> Downloading packages...
|
|
Checking for upgrades (4 candidates): .... done
|
|
Processing candidates (4 candidates): .... done
|
|
The following 3 package(s) will be affected (of 0 checked):
|
|
|
|
Installed packages to be UPGRADED:
|
|
pfSense-kernel-pfSense: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
|
|
pfSense-default-config-serial: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
|
|
pfSense-base-nanobsd: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
|
|
|
|
The operation will free 210 B.
|
|
38 MiB to be downloaded.
|
|
Fetching pfSense-kernel-pfSense-2.3.a.20151005.1844.txz: .......... done
|
|
Fetching pfSense-default-config-serial-2.3.a.20151005.1844.txz: . done
|
|
Fetching pfSense-base-nanobsd-2.3.a.20151005.1844.txz: .......... done
|
|
Checking integrity... done (0 conflicting)
|
|
>>> Upgrading pfSense kernel...
|
|
Checking integrity... done (0 conflicting)
|
|
The following 1 package(s) will be affected (of 0 checked):
|
|
|
|
Installed packages to be UPGRADED:
|
|
pfSense-kernel-pfSense: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
|
|
|
|
The operation will free 3 B.
|
|
[1/1] Upgrading pfSense-kernel-pfSense from 2.3.a.20151003.0006 to 2.3.a.20151005.1844...
|
|
===> Keeping a copy of current kernel in /boot/kernel.old
|
|
[1/1] Extracting pfSense-kernel-pfSense-2.3.a.20151005.1844: .......... done
|
|
Rebooting...
|
|
>>> Locking kernel package... done.
|
|
*** Welcome to pfSense 2.3-ALPHA-nanobsd (amd64) on Test-rt-01 ***
|
|
|
|
WAN (wan) -> re1 -> v4/DHCP4: 10.49.209.3/22
|
|
LAN (lan) -> re2 -> v4: 10.49.64.250/22
|
|
OPT1 (opt1) -> re0 -> v4: 10.49.68.250/22
|
|
|
|
0) Logout (SSH only) 9) pfTop
|
|
1) Assign Interfaces 10) Filter Logs
|
|
2) Set interface(s) IP address 11) Restart webConfigurator
|
|
3) Reset webConfigurator password 12) pfSense Developer Shell
|
|
4) Reset to factory defaults 13) Upgrade from console
|
|
5) Reboot system 14) Disable Secure Shell (sshd)
|
|
6) Halt system 15) Restore recent configuration
|
|
7) Ping host 16) Restart PHP-FPM
|
|
8) Shell
|
|
|
|
|
|
Enter an option: Shutdown NOW!
|
|
shutdown: [pid 52428]
|
|
|
|
*** FINAL System shutdown message from root@Test-rt-01.abc.example.com ***
|
|
|
|
System going down IMMEDIATELY
|
|
|
|
|
|
|
|
System shutdown time has arrived
|
|
|
|
pfSense is now shutting down ...
|
|
|
|
Oct 6 09:40:57 lighttpd[33212]: (server.c.1567) server stopped by UID = 0 PID = 1
|
|
ovpnc1: link state changed to DOWN
|
|
ovpnc4: link state changed to DOWN
|
|
Waiting (max 60 seconds) for system process `vnlru' to stop...done
|
|
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
|
|
Waiting (max 60 seconds) for system process `syncer' to stop...
|
|
Syncing disks, vnodes remaining...0 0 0 done
|
|
All buffers synced.
|
|
Uptime: 2d0h43m24s
|
|
PC Engines APU BIOS build date: Apr 5 2014
|
|
Reading data from file [bootorder]
|
|
SeaBIOS (version ?-20140405_120742-frink)
|
|
SeaBIOS (version ?-20140405_120742-frink)
|
|
Found coreboot cbmem console @ 7e150400
|
|
Found mainboard PC Engines APU
|
|
Relocating init from 0x000e8e71 to 0x7e1065e0 (size 39259)
|
|
Found CBFS header at 0xfffffb90
|
|
found file "bootorder" in cbmem
|
|
CPU Mhz=1001
|
|
Found 27 PCI devices (max PCI bus is 05)
|
|
Copying PIR from 0x7e160400 to 0x000f27a0
|
|
Copying MPTABLE from 0x7e161400/7e161410 to 0x000f25b0 with length 1ec
|
|
Copying ACPI RSDP from 0x7e162400 to 0x000f2590
|
|
Copying SMBIOS entry point from 0x7e16d800 to 0x000f2570
|
|
Using pmtimer, ioport 0x808
|
|
Scan for VGA option rom
|
|
EHCI init on dev 00:12.2 (regs=0xf7f04420)
|
|
Found 1 lpt ports
|
|
Found 2 serial ports
|
|
AHCI controller at 11.0, iobase f7f04000, irq 11
|
|
EHCI init on dev 00:13.2 (regs=0xf7f04520)
|
|
EHCI init on dev 00:16.2 (regs=0xf7f04620)
|
|
Searching bootorder for: /rom@img/setup
|
|
Searching bootorder for: /rom@img/memtest
|
|
OHCI init on dev 00:12.0 (regs=0xf7f00000)
|
|
OHCI init on dev 00:13.0 (regs=0xf7f01000)
|
|
OHCI init on dev 00:14.5 (regs=0xf7f02000)
|
|
OHCI init on dev 00:16.0 (regs=0xf7f03000)
|
|
Searching bootorder for: /pci@i0cf8/usb@16,2/storage@1/*@0/*@0,0
|
|
Searching bootorder for: /pci@i0cf8/usb@16,2/usb-*@1
|
|
USB MSC vendor='Multiple' product='Card Reader' rev='1.00' type=0 removable=1
|
|
USB MSC blksize=512 sectors=15523840
|
|
All threads complete.
|
|
Scan for option roms
|
|
Running option rom at c000:0003
|
|
|
|
|
|
iPXE (http://ipxe.org) 00:00.0 C000 PCI2.10 PnP PMMpmm call arg1=1
|
|
pmm call arg1=0
|
|
+7E0DA5C0pmm call arg1=1
|
|
pmm call arg1=0
|
|
+7E03A5C0 C000
|
|
|
|
|
|
|
|
Searching bootorder for: /rom@genroms/pxeboot.rom
|
|
|
|
Build date: Apr 5 2014
|
|
System memory size: 2017 MB
|
|
|
|
Press F12 for boot menu.
|
|
|
|
Searching bootorder for: HALT
|
|
drive 0x000f2520: PCHS=0/0/0 translation=lba LCHS=966/255/63 s=15523840
|
|
Space available for UMB: c1000-ee800, f0000-f2520
|
|
Returned 245760 bytes of ZoneHigh
|
|
e820 map has 6 items:
|
|
0: 0000000000000000 - 000000000009fc00 = 1 RAM
|
|
1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
|
|
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
|
|
3: 0000000000100000 - 000000007e14c000 = 1 RAM
|
|
4: 000000007e14c000 - 000000007f000000 = 2 RESERVED
|
|
5: 00000000f8000000 - 00000000f9000000 = 2 RESERVED
|
|
enter handle_19:
|
|
NULL
|
|
Booting from Hard Disk...
|
|
Booting from 0000:7c00
|
|
|
|
1 pfSense
|
|
2 pfSense
|
|
|
|
F6 PXE
|
|
Boot: 1
|
|
/boot/config: -S115200 -h
|
|
Consoles: serial port
|
|
BIOS drive C: is disk0
|
|
BIOS 639kB/2064688kB available memory
|
|
|
|
FreeBSD/x86 bootstrap loader, Revision 1.1
|
|
(root@pfs23-amd64-builder, Sat Oct 3 00:19:21 CDT 2015)
|
|
Loading /boot/defaults/loader.conf
|
|
/boot/kernel/kernel text=0x1260340 data=0xab4a70+0x359b00 syms=[0x8+0x173730+0x8+0x1708e4]
|
|
|
|
Hit [Enter] to boot immediately, or any other key for command prompt.
|
|
Booting [/boot/kernel/kernel]...
|
|
KDB: debugger backends: ddb
|
|
KDB: current backend: ddb
|
|
Copyright (c) 1992-2015 The FreeBSD Project.
|
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
The Regents of the University of California. All rights reserved.
|
|
FreeBSD is a registered trademark of The FreeBSD Foundation.
|
|
FreeBSD 10.2-STABLE #81 8aae621(devel): Mon Oct 5 19:01:54 CDT 2015
|
|
root@pfs23-amd64-builder:/usr/home/pfsense/pfsense/tmp/obj/usr/home/pfsense/pfsense/tmp/FreeBSD-src/sys/pfSense amd64
|
|
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
|
|
CPU: AMD G-T40E Processor (1000.02-MHz K8-class CPU)
|
|
Origin="AuthenticAMD" Id=0x500f20 Family=0x14 Model=0x2 Stepping=0
|
|
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
|
|
Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
|
|
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
|
|
AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
|
|
SVM: NP,NRIP,NAsids=8
|
|
TSC: P-state invariant, performance statistics
|
|
real memory = 2115289088 (2017 MB)
|
|
avail memory = 2004357120 (1911 MB)
|
|
Event timer "LAPIC" quality 400
|
|
ACPI APIC Table: <CORE COREBOOT>
|
|
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
|
|
FreeBSD/SMP: 1 package(s) x 2 core(s)
|
|
cpu0 (BSP): APIC ID: 0
|
|
cpu1 (AP): APIC ID: 1
|
|
random device not loaded; using insecure entropy
|
|
ioapic0 <Version 2.1> irqs 0-23 on motherboard
|
|
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff806152e0, 0) error 1
|
|
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80615390, 0) error 1
|
|
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
|
|
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80615440, 0) error 1
|
|
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
|
|
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8063d7f0, 0) error 1
|
|
wlan: mac acl policy registered
|
|
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
|
|
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8063d8a0, 0) error 1
|
|
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
|
|
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
|
|
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8063d950, 0) error 1
|
|
random: <Software, Yarrow> initialized
|
|
kbd0 at kbdmux0
|
|
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff3900, 0) error 19
|
|
cryptosoft0: <software crypto> on motherboard
|
|
padlock0: No ACE support.
|
|
acpi0: <CORE COREBOOT> on motherboard
|
|
acpi0: Power Button (fixed)
|
|
cpu0: <ACPI CPU> on acpi0
|
|
cpu1: <ACPI CPU> on acpi0
|
|
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
|
|
Event timer "RTC" frequency 32768 Hz quality 0
|
|
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
|
|
Timecounter "i8254" frequency 1193182 Hz quality 0
|
|
Event timer "i8254" frequency 1193182 Hz quality 100
|
|
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
|
|
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
|
|
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
|
|
Timecounter "HPET" frequency 14318180 Hz quality 950
|
|
Event timer "HPET" frequency 14318180 Hz quality 550
|
|
Event timer "HPET1" frequency 14318180 Hz quality 450
|
|
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
|
|
pci0: <ACPI PCI bus> on pcib0
|
|
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
|
|
pci1: <ACPI PCI bus> on pcib1
|
|
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xf7a00000-0xf7a00fff,0xf7900000-0xf7903fff irq 16 at device 0.0 on pci1
|
|
re0: Using 1 MSI-X message
|
|
re0: ASPM disabled
|
|
re0: Chip rev. 0x2c000000
|
|
re0: MAC rev. 0x00200000
|
|
miibus0: <MII bus> on re0
|
|
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
|
|
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
|
|
re0: Using defaults for TSO: 65518/35/2048
|
|
re0: Ethernet address: 00:0d:b9:33:88:88
|
|
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
|
|
pci2: <ACPI PCI bus> on pcib2
|
|
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf7c00000-0xf7c00fff,0xf7b00000-0xf7b03fff irq 17 at device 0.0 on pci2
|
|
re1: Using 1 MSI-X message
|
|
re1: ASPM disabled
|
|
re1: Chip rev. 0x2c000000
|
|
re1: MAC rev. 0x00200000
|
|
miibus1: <MII bus> on re1
|
|
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
|
|
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
|
|
re1: Using defaults for TSO: 65518/35/2048
|
|
re1: Ethernet address: 00:0d:b9:33:88:89
|
|
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
|
|
pci3: <ACPI PCI bus> on pcib3
|
|
re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf7e00000-0xf7e00fff,0xf7d00000-0xf7d03fff irq 18 at device 0.0 on pci3
|
|
re2: Using 1 MSI-X message
|
|
re2: ASPM disabled
|
|
re2: Chip rev. 0x2c000000
|
|
re2: MAC rev. 0x00200000
|
|
miibus2: <MII bus> on re2
|
|
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2
|
|
rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
|
|
re2: Using defaults for TSO: 65518/35/2048
|
|
re2: Ethernet address: 00:0d:b9:33:88:8a
|
|
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xf7f04000-0xf7f043ff irq 19 at device 17.0 on pci0
|
|
ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
|
|
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
|
|
ahcich0: <AHCI channel> at channel 0 on ahci0
|
|
ahcich1: <AHCI channel> at channel 1 on ahci0
|
|
ahcich2: <AHCI channel> at channel 2 on ahci0
|
|
ahcich3: <AHCI channel> at channel 3 on ahci0
|
|
ahcich4: <AHCI channel> at channel 4 on ahci0
|
|
ahcich5: <AHCI channel> at channel 5 on ahci0
|
|
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f00000-0xf7f00fff irq 18 at device 18.0 on pci0
|
|
usbus0 on ohci0
|
|
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f04400-0xf7f044ff irq 17 at device 18.2 on pci0
|
|
usbus1: EHCI version 1.0
|
|
usbus1 on ehci0
|
|
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f01000-0xf7f01fff irq 18 at device 19.0 on pci0
|
|
usbus2 on ohci1
|
|
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f04500-0xf7f045ff irq 17 at device 19.2 on pci0
|
|
usbus3: EHCI version 1.0
|
|
usbus3 on ehci1
|
|
isab0: <PCI-ISA bridge> at device 20.3 on pci0
|
|
isa0: <ISA bus> on isab0
|
|
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
|
|
pci4: <ACPI PCI bus> on pcib4
|
|
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f02000-0xf7f02fff irq 18 at device 20.5 on pci0
|
|
usbus4 on ohci2
|
|
pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
|
|
pci5: <ACPI PCI bus> on pcib5
|
|
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f03000-0xf7f03fff at device 22.0 on pci0
|
|
usbus5 on ohci3
|
|
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f04600-0xf7f046ff at device 22.2 on pci0
|
|
usbus6: EHCI version 1.0
|
|
usbus6 on ehci2
|
|
acpi_button0: <Power Button> on acpi0
|
|
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff on isa0
|
|
gpioapu0: Environment returned APU
|
|
gpioapu0: Address on reg 0x24 is 0xfed80000/4275568640
|
|
gpioapu0 at iomem 0xfed80100-0xfed801ff on isa0
|
|
ppc0: cannot reserve I/O port range
|
|
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
|
|
uart0: console (115200,n,8,1)
|
|
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
|
|
random: unblocking device.
|
|
usbus0: 12Mbps Full Speed USB v1.0
|
|
Timecounters tick every 1.000 msec
|
|
IPsec: Initialized Security Association Processing.
|
|
usbus1: 480Mbps High Speed USB v2.0
|
|
usbus2: 12Mbps Full Speed USB v1.0
|
|
usbus3: 480Mbps High Speed USB v2.0
|
|
ugen0.1: <ATI> at usbus0
|
|
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
|
|
ugen1.1: <ATI> at usbus1
|
|
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
|
|
ugen2.1: <ATI> at usbus2
|
|
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
|
|
ugen3.1: <ATI> at usbus3
|
|
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
|
|
usbus4: 12Mbps Full Speed USB v1.0
|
|
usbus5: 12Mbps Full Speed USB v1.0
|
|
usbus6: 480Mbps High Speed USB v2.0
|
|
ugen4.1: <ATI> at usbus4
|
|
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
|
|
ugen5.1: <ATI> at usbus5
|
|
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
|
|
ugen6.1: <ATI> at usbus6
|
|
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
|
|
uhub4: 2 ports with 2 removable, self powered
|
|
uhub0: 5 ports with 5 removable, self powered
|
|
uhub2: 5 ports with 5 removable, self powered
|
|
uhub5: 4 ports with 4 removable, self powered
|
|
uhub6: 4 ports with 4 removable, self powered
|
|
uhub1: 5 ports with 5 removable, self powered
|
|
uhub3: 5 ports with 5 removable, self powered
|
|
ugen6.2: <Generic> at usbus6
|
|
umass0: <Generic Flash Card ReaderWriter, class 0/0, rev 2.01/1.00, addr 2> on usbus6
|
|
SMP: AP CPU #1 Launched!
|
|
Timecounter "TSC" frequency 1000022330 Hz quality 800
|
|
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
|
|
da0: <Multiple Card Reader 1.00> Removable Direct Access SPC-2 SCSI device
|
|
da0: Serial Number 058F63666485
|
|
da0: 40.000MB/s transfers
|
|
da0: 7580MB (15523840 512 byte sectors: 255H 63S/T 966C)
|
|
da0: quirks=0x2<NO_6_BYTE>
|
|
Trying to mount root from ufs:/dev/ufs/pfsense0 [ro,sync,noatime]...
|
|
Configuring crash dumps...
|
|
/dev/ufs/pfsense0: FILE SYSTEM CLEAN; SKIPPING CHECKS
|
|
/dev/ufs/pfsense0: clean, 2826407 free (1615 frags, 353099 blocks, 0.0% fragmentation)
|
|
/dev/ufs/cf: FILE SYSTEM CLEAN; SKIPPING CHECKS
|
|
/dev/ufs/cf: clean, 94643 free (35 frags, 11826 blocks, 0.0% fragmentation)
|
|
Filesystems are clean, continuing...
|
|
Mounting filesystems...
|
|
Setting up memory disks... done.
|
|
|
|
___
|
|
___/ f \
|
|
/ p \___/ Sense
|
|
\___/ \
|
|
\___/
|
|
|
|
Welcome to pfSense 2.3-ALPHA on the 'nanobsd' platform ...
|
|
|
|
Creating symlinks......ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
|
|
32-bit compatibility ldconfig path: /usr/lib32
|
|
done.
|
|
Running second stage of upgrade process...
|
|
Upgrading necessary packages...
|
|
Checking for upgrades (3 candidates): ... done
|
|
Processing candidates (3 candidates): ... done
|
|
Checking integrity... done (0 conflicting)
|
|
The following 2 package(s) will be affected (of 0 checked):
|
|
|
|
Installed packages to be UPGRADED:
|
|
pfSense-default-config-serial: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
|
|
pfSense-base-nanobsd: 2.3.a.20151003.0006 -> 2.3.a.20151005.1844 [pfSense-core]
|
|
|
|
The operation will free 207 B.
|
|
[1/2] Upgrading pfSense-default-config-serial from 2.3.a.20151003.0006 to 2.3.a.20151005.1844...
|
|
[1/2] Extracting pfSense-default-config-serial-2.3.a.20151005.1844: .. done
|
|
[2/2] Upgrading pfSense-base-nanobsd from 2.3.a.20151003.0006 to 2.3.a.20151005.1844...
|
|
===> Keeping a copy of current version mtree
|
|
[2/2] Extracting pfSense-base-nanobsd-2.3.a.20151005.1844: .. done
|
|
===> Removing schg flag from base files
|
|
===> Extracting new base tarball
|
|
===> Removing static obsoleted files
|
|
>>> Removing unnecessary packages... done.
|
|
>>> Cleanup pkg cache... done.
|
|
External config loader 1.0 is now starting...
|
|
Launching the init system...pid 21 (sh), uid 0: exited on signal 11 (core dumped)
|
|
|