Actions
Feature #10897
closed
SNMPV3-trap/inform Add Snmpv3 trap/inform Field
Start date:
09/13/2020
Due date:
% Done:
100%
Estimated time:
Plus Target Version:
Description
There is no Field for snmpv3 trap/inform host , port .there is only snmpV2c/v1 trap,inform field
Plz add
Updated by Viktor Gurov over 3 years ago
- Category set to NET-SNMP
http://www.net-snmp.org/docs/man/snmpd.conf.html:
trapsess [SNMPCMD_ARGS] HOST provides a more generic mechanism for defining notification destinations. SNMPCMD_ARG S should be the command-line options required for an equivalent snmptrap (or snmpinform) command to send the desired notification. The option -Ci can be used (with -v2c or -v3) to generate an INFORM notification rather than an unacknowledged TRAP. This is the appropriate directive for defining SNMPv3 trap receivers. See http://www.net-snmp.org/tutorial/tutorial-5/commands/snmptrap-v3.html for more information about SNMPv3 notification behaviour.
Updated by Depressed Admin over 3 years ago
Viktor Gurov wrote:
I didn't understand, do u meant the "trapsess [SNMPCMD_ARGS] HOST" command will configure snmpv3 trap/infrom permanently ?
Updated by Viktor Gurov over 3 years ago
Updated by Jim Pingle over 3 years ago
- Status changed from New to Pull Request Review
Updated by Renato Botelho over 3 years ago
- Status changed from Pull Request Review to Feedback
- Assignee set to Renato Botelho
- % Done changed from 0 to 100
PR has been merged. Thanks!
Updated by Azamat Khakimyanov over 3 years ago
Tested on 2.4.5_p1 and on 2.5.0-DEVELOPMENT (built on Tue Oct 27 07:03:51 EDT 2020)
There are SNMPv3 traps and informs available now.
This feature request can be marked RESOLVED.
Updated by Azamat Khakimyanov over 3 years ago
- Status changed from Feedback to Resolved
Actions