Project

General

Profile

Actions
Copy link

Bug #12604

closed

IPv6 interface prefix change not reflected in RADVD configuration

Added by Viktor Gurov almost 3 years ago. Updated almost 3 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
Viktor Gurov
Category:
IPv6 Router Advertisements (radvd/rtsold)
Target version:
2.6.0
Start date:
Due date:
% Done:

100%

Estimated time:
Plus Target Version:
22.01
Release Notes:
Default
Affected Version:
2.5.2
Affected Architecture:

Description

https://forum.netgate.com/topic/168410/ipv6-prefix-change-not-reflected-in-ra-messages:
"This may pre-date 20211210, which I upgraded to just before this, but I changed my LAN interface IPv6 address from xxxx:xxxx:xxxx::1/64 to xxxx:xxxx:xxxx:1::1/64 so as not to have the same prefix on LAN as my /48. After that, none of my machines picked-up the new prefix (for hours). Running tcpdump on one of them, the router was still advertising the old prefix (xxxx:xxxx:xxxx:0::/64, in effect).

The fix was to disable RA on the interface and re-enable it (unmanaged, as before). Prior to that, DHCPv6 (disabled) did show the new prefix, leading me to think I didn't need to worry about RA. Everyone came to life after RA started working."

RADVD should be restarted when changing the IPv6 address of the interface

Actions
Copy link
 #2

Updated by Jim Pingle almost 3 years ago

  • Status changed from New to Pull Request Review
  • Assignee set to Viktor Gurov
  • Target version set to 2.6.0
  • Plus Target Version set to 22.01
Actions
Copy link
 #3

Updated by Viktor Gurov almost 3 years ago

  • Status changed from Pull Request Review to Feedback
  • % Done changed from 0 to 100
Actions
Copy link
 #4

Updated by Danilo Zrenjanin almost 3 years ago

I couldn't replicate the issue on:

2.5.2-RELEASE (amd64)
built on Fri Jul 02 15:33:00 EDT 2021
FreeBSD 12.2-STABLE

I captured the IPv6 router advertisement with a new prefix right after the prefix change under the interface setup. And I was able to ping a new LAN IP address right after the change.

Actions
Copy link
 #5

Updated by Danilo Zrenjanin almost 3 years ago

Tested on:

2.6.0-BETA (amd64)
built on Tue Jan 11 06:18:03 UTC 2022
FreeBSD 12.3-STABLE

It works as expected. I am marking this ticket resolved.

Actions
Copy link
 #6

Updated by Danilo Zrenjanin almost 3 years ago

  • Status changed from Feedback to Resolved
Actions
Copy link

Also available in: Atom PDF