Project

General

Profile

Actions

Bug #12878

open

Traffic shaping by interface, route queue bandwidth inbound, out by a large factor.

Added by Blake Drayson 4 months ago. Updated 23 days ago.

Status:
Incomplete
Priority:
Normal
Assignee:
-
Category:
Traffic Shaper (ALTQ)
Target version:
-
Start date:
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Default
Affected Version:
2.6.0
Affected Architecture:
arm64

Description

Since upgrading to pfSense Plus 22.01 from the latest community edition, my by interface priority queue bandwidth has an odd bug. Link is 200 Mbit/s and is set to 190 to give appropriate overhead. However when the queue is active it limits the connection to around 100 Mbit/s disable the queue it works fine. Work around so far has been to add 100 Mbit/s to the bandwidth value of the root queue (so it is now set to 290). The downlink queue is working without issue and as expected. For additional info the link that is being shapped is a L2TP link over the top of the WAN link.

Actions #1

Updated by Kris Phillips 2 months ago

Blake,

What model of device are you running? The redmine is stated it's for arm64. What type of NICs? Can you please provide some screenshots?

Actions #2

Updated by Marcos Mendoza about 1 month ago

  • Project changed from pfSense Plus to pfSense
  • Category changed from Traffic Shaper (ALTQ) to Traffic Shaper (ALTQ)
  • Status changed from New to Feedback
  • Affected Plus Version deleted (21.02)
  • Affected Version set to 2.6.0

Please test 22.05 BETA when possible and let us know if the issue persists. Details on the Traffic Shaping config and related rules would be helpful.

Actions #3

Updated by Kris Phillips 24 days ago

Unless further feedback is provided on this redmine, it can likely be closed due to lack of information in Rejected status.

Actions #4

Updated by Jim Pingle 23 days ago

  • Status changed from Feedback to Incomplete
Actions

Also available in: Atom PDF