Bug #1292
closed
PPTP server with Radius breaks on upgrade from 1.2.3 to 2.0
100%
Description
If upgrading from 1.2.3 to 2.0 (BETA5-02182011) and you have a PPTP server with Radius configured. It breaks the PPTP config. Until you clear the configuration it will not let you correct it or use the PPTP server.
Get the following error in the browser if you try to turn the PPTP server "off":
Fatal error: Cannot unset string offsets in /usr/local/www/vpn_pptp.php on line 166
This page seems like it needs a far amount of work.
Files
Updated by Roy Walker almost 14 years ago
After clearing the PPTP configuration from config.xml I was able to setup the PPTP server (so the page does work). However the PPTP firewall rule had to be deleted and re-created.
Updated by Ermal Luçi over 13 years ago
Can you post your pptp section from the 1.2.3 config?
Updated by Chris Buechler over 13 years ago
here's a pretty stock config that exhibits problems
Updated by Guilherme Oliveira over 13 years ago
I have the same problem. I migrated from 1.2.3.
<pptpd>
<redir/>
<localip>172.16.99.1</localip>
<remoteip>172.16.99.96</remoteip>
<radius>
<server>172.18.1.2</server>
<secret>commented</secret>
<enable/>
<server2>
<ip/>
<port/>
<acctport/>
<secret2/>
</server2>
<nasip/>
<acct_update/>
</radius>
<wins>172.18.1.2</wins>
<req128/>
<n_pptp_units>16</n_pptp_units>
<dns1>172.18.1.11</dns1>
<dns2>172.18.1.3</dns2>
<mode>server</mode>
</pptpd>
Updated by Jim Pingle over 13 years ago
- Status changed from New to Feedback
- % Done changed from 0 to 100
Applied in changeset 7171b7b65dfe9b4a93220b31d689c0fa7e1da40e.
Updated by Chris Buechler over 13 years ago
- Status changed from Feedback to Resolved