Project

General

Profile

Actions
Copy link

Bug #13939

closed

IPv6 does not work on secondary PPPoE WAN

Added by Renato Botelho almost 2 years ago. Updated over 1 year ago.

Status:
Resolved
Priority:
Normal
Assignee:
Reid Linnemann
Category:
PPP Interfaces
Target version:
2.7.0
Start date:
Due date:
% Done:

100%

Estimated time:
Plus Target Version:
23.05
Release Notes:
Default
Affected Version:
Affected Architecture:

Description

I have 2 PPPoE WANs at home and IPv6 only works on primary link, used as default gateway. In this case pppoe0 works as expected and pppoe1 fails because system tries to route its gateway address through pppoe0 connection. ifconfig show it as detached.

[23.01-RC][root@pfgarga.home.arpa]/tmp: ifconfig pppoe1
pppoe1: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric 0 mtu 1492
    description: TRIBENET
    inet6 fe80::290:bff:fe7a:8647%pppoe1 prefixlen 64 scopeid 0xc
    inet6 2804:184c:10:7455:290:bff:fe7a:8647 prefixlen 64 detached autoconf
    inet 200.12.10.232 --> 200.12.0.50 netmask 0xffffffff
    nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>

[23.01-RC][root@pfgarga.home.arpa]/tmp: cat /tmp/pppoe1_routerv6
fe80::f7:ef3a

[23.01-RC][root@pfgarga.home.arpa]/tmp: route -6 get fe80::f7:ef3a
   route to: fe80::f7:ef3a
destination: default
       mask: default
    gateway: fe80::6e16:32ff:fe47:eaa8%pppoe0
        fib: 0
  interface: pppoe0
      flags: <UP,GATEWAY,DONE>
 recvpipe  sendpipe  ssthresh  rtt,msec    mtu        weight    expire
       0         0         0         0      1492         1         0
Actions
Copy link

Also available in: Atom PDF