Project

General

Profile

Actions

Bug #1395

closed

RRD data not collecting accurate information

Added by David Miller almost 13 years ago. Updated over 12 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
-
Category:
RRD Graphs
Target version:
-
Start date:
03/30/2011
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.0
Affected Architecture:

Description

I noticed that after switching over our IPSEC tunnels over to pfSense 2.0 RC1 that there was a strange spike in outbound traffic mirrored in the Opt Wan interface that was really going out of the Wan interface. I've confirmed this by cross checking the data using our external snmp monitoring and have attached an image that shows the discrepancy. I also did a number of packet captures that confirmed that the traffic being associated with both WAN interfaces was indeed only on the Wan interface.

My setup is as follows. WAN and Opt Wan interface are in a gateway group with the Opt Wan as Tier 1 and Wan in Tier 2. And Opt Wan is the default gateway.

I also have a thread on the support forum which can be found at http://forum.pfsense.org/index.php/topic,34834.0.html


Files

rrd_data_problem.jpg (137 KB) rrd_data_problem.jpg David Miller, 03/30/2011 12:20 PM
Actions #1

Updated by David Miller almost 13 years ago

I just noticed that this problem appears to be fixed. I'm not sure when this behavior changed but this bug can be closed.

Actions #2

Updated by Jim Pingle almost 13 years ago

  • Status changed from New to Resolved

Thanks for the feedback. I'll mark it as resolved.

Actions #3

Updated by David Miller over 12 years ago

I need to open this one back up. :(

I'm not sure what build this behavior returned but I'm now seeing the traffic from a IPSEC tunnel that's terminated on WAN1 show up in the rrd graphs for both WAN interfaces. And as before my external snmp monitoring is only showing this traffic on WAN1.

Actions #4

Updated by David Miller over 12 years ago

Oh I should have mentioned that my current build is a week or so old.
2.0-RC3 (i386) built on Fri Jul 15 05:55:15 EDT 2011

I'll upgrade to the newest build next week after I get back from vacation. Since everything else seems to be working I don't want to risk any changes before my vacation.

Actions

Also available in: Atom PDF