Project

General

Profile

Actions
Copy link

Bug #1445

closed

Trouble with interface msk0 (Marvell Yukon 88E8057 Gigabit Ethernet)

Added by Malte Stretz over 13 years ago. Updated over 4 years ago.

Status:
Rejected
Priority:
Normal
Assignee:
-
Category:
Interfaces
Target version:
-
Start date:
04/17/2011
Due date:
% Done:

0%

Estimated time:
Plus Target Version:
Release Notes:
Affected Version:
2.0
Affected Architecture:

Description

This is a follow-up to bug 1444. Installed via pfSense-memstick-2.0-RC1-i386-20110417-0359.img.gz.

As described in bug 1444 after the first boot I wasn't able to get a DHCP lease from the LAN interface which I set to the on-board interface (see attached dmesg.txt). After battling bug 1444 and a reboot, I was able to access the WebUI without problems. I set up msk0 as OPT1 with the IP 192.168.2.1, a DHCP server and pass-all firewall rules. And again, I could neither get a lease from there nor ping the machine.

It is a Gigabit interface which is connected to a cheap 100 MBit switch; auto-negotiation looks fine (see attached ifconfig.txt), dhcp server is running (see attached ps-axfu.txt). Looks like there are some driver trouble with this chipset?

The system is a Lenovo ThinkCentre A58 (7515-79G).

Files

Download all files
ifconfig.txt (1.45 KB) ifconfig.txt Malte Stretz, 04/17/2011 11:26 AM
dmesg.txt (37.5 KB) dmesg.txt Malte Stretz, 04/17/2011 11:26 AM
ps-axfu.txt (5.31 KB) ps-axfu.txt Malte Stretz, 04/17/2011 11:26 AM
config-pfSense.localdomain-20110417181349.xml (14.5 KB) config-pfSense.localdomain-20110417181349.xml Malte Stretz, 04/17/2011 11:26 AM
Actions
Copy link

Also available in: Atom PDF