Actions
Correction #15128
closed
PD
JP
Note that a WireGuard peer must have "Dynamic" unset to see Endpoint options
Correction #15128:
Note that a WireGuard peer must have "Dynamic" unset to see Endpoint options
Start date:
Due date:
% Done:
100%
Estimated time:
Description
Page: https://docs.netgate.com/pfsense/en/latest/recipes/wireguard-s2s.html
Feedback: The Peer Configuration section of this page, and the wireguard-s2ms page are referencing Endpoint: and Endpoint Port: option fields that do not exist with the default settings. The documentation should specify that that the 'dynamic' box needs to be unchecked to access those option fields.
KP Updated by Kris Phillips over 2 years ago
- Tracker changed from New Content to Correction
- Status changed from New to Confirmed
I can confirm this behavior in the GUI.
TT Updated by Thomasmak Thomasmak over 2 years ago
- File 65.gif added
TT Updated by Thomasmak Thomasmak over 2 years ago
- File 69.gif added
JP Updated by Jim Pingle over 2 years ago
- File deleted (
65.gif)
JP Updated by Jim Pingle over 2 years ago
- File deleted (
69.gif)
JP Updated by Jim Pingle almost 2 years ago
- Subject changed from Feedback on pfSense® software Configuration Recipes — WireGuard Site-to-Site VPN Configuration Example to Note that a WireGuard peer must have "Dynamic" unset to see Endpoint options
JP Updated by Jim Pingle almost 2 years ago
- Status changed from Confirmed to Closed
- Assignee set to Jim Pingle
- % Done changed from 0 to 100
There were a couple other instances where this wasn't noted in other WG recipes. Now they all mention unchecked Dynamic Endpoint before setting the Endpoint options.
https://gitlab.netgate.com/docs/pfSense-docs/-/commit/8dd2e39c1f080d23b1a95c042e4c1017fb7dc95b
Actions